Institut for Produktion

1 - 100 ud af 2221Pr. side: 100
RSS feed af denne liste
Sortering: Udgivelsesår
  1. 2012
  2. E-pub ahead of print

    Erratum : Performance optimization by musculoskeletal simulation. / Rasmussen, John ; Holmberg, L. Joakim ; Sørensen, Kasper ; Kwan, Maxine Mei Sum ; Andersen, Michael Skipper ; de Zee, Mark.

    I: Science & Motricite, 24.02.2012.

    Publikation: Forskning - peer review › Tidsskriftartikel

  3. Udgivet

    Investigation of the long term effects of moisture on carbon fibre and epoxy matrix composites. / Zafar, A. ; Bertocco, F. ; Schjødt-Thomsen, J. ; Rauhe, Jens Christian M..

    I: Composites Science and Technology, Vol. 72, Nr. 6, 27.03.2012, s. 656-666.

    Publikation: Forskning - peer review › Tidsskriftartikel

  4. Udgivet

    Letter to the Editor. / Andersen, Michael Skipper ; Rasmussen, John ; Damsgaard, Michael.

    I: Journal of Theoretical Biology, Vol. 298, 07.04.2012, s. 154-155.

    Publikation: Forskning - peer review › Letter

  5. Udgivet

    A Genetic Algorithm-based Heuristic for Part-Feeding Mobile Robot Scheduling Problem. / Dang, Vinh Quang ; Nielsen, Izabela Ewa ; Bocewicz, G..

    I: Trends in Practical Applications of Agents and Multiagent Systems. red. / Juan M. Corchado Rodríguez ; Javier Bajo Pérez ; Paulina Golinska ; Sylvain Giroux ; Rafael Corchuelo. Vol. 157/2012 Springer Berlin / Heidelberg, 2012. s. 85-92 (Advances in Intelligent and Soft Computing).

    Publikation: Forskning - peer review › Bidrag til bog/antologi

  6. Udgivet

    A Linear Soft Tissue Artefact Model for Human Movement Analysis: Proof of Concept using Vivo Data. / Andersen, Michael Skipper ; Damsgaard, Michael ; Rasmussen, John ; Ramsey, Dan K. ; Benoit, Daniel L..

    I: Gait & Posture, Vol. 35, Nr. 4, 04.2012, s. 606.

    Publikation: Forskning - peer review › Tidsskriftartikel

  7. Accepteret

    A Case of Cost Estimation in an Engineer-to-Order Company Moving towards Mass Customization. / Petersen, Thomas Ditlev ; Nielsen, Peter.

    I: International Journal of Mass Customisation, 2012.

    Publikation: Forskning - peer review › Tidsskriftartikel

  8. E-pub ahead of print

    A Closed form Solution for Nonlinear Oscillators’ Frequencies Using Amplitude-Frequency Formulation. / Barari, Amin ; Kimiaeifar, Amin ; Nejad, M.G ; Motwevalli, M ; Domairry, G.

    I: Shock and Vibration, 2012.

    Publikation: Forskning - peer review › Tidsskriftartikel

  9. Accepteret

    A decision support system for waste collection management and its potential improvement with radio-frequency identification technology (RFID). / Nielsen, Izabela Ewa ; Lim, M. ; Nielsen, Peter ; Aggarwal, R..

    I: International Journal of Environmental Technology and Management, 2012.

    Publikation: Forskning - peer review › Tidsskriftartikel

  10. Udgivet

    Agricultural Field Machinery for the future - from an Engineering Perspective. / Jørgensen, Martin Heide.

    I: Biosystems Engineering, Nr. 1, 2012, s. 109-113.

    Publikation: Forskning - peer review › Tidsskriftartikel

  11. Accepteret

    Approximate analytical solution for Bernoli-Euler beams under different boundary conditions with non-linear Winkler type foundation. / Ansari, A. ; Rokni, E. ; Kimiaeifar, Amin ; Fouladi, M-.

    I: Journal of Theoretical and Applied Mechanics, 2012.

    Publikation: Forskning - peer review › Tidsskriftartikel

  12. Afsendt

    Decision Support for Multi-Criteria Project Portfolio Evaluation. / Nielsen, Izabela Ewa ; Nielsen, Peter ; Dang, Vinh Quang.

    I: Cardiff Logistics and Operations Management Working Papers, 2012.

    Publikation: Forskning - peer review › Tidsskriftartikel

  13. In press

    Determination of mechanical properties of PVC foam using a modified Arcan fixture. / Tahar, Siavash Talebi ; Thomsen, Ole Thybo ; M Dulieu-Barton, Janice ; Zhang, Shufeng.

    I: Composites Part A: Applied Science and Manufacturing, 2012.

    Publikation: Forskning - peer review › Tidsskriftartikel

  14. Accepteret

    Estimation of failure probability for adhesive bonded scarfed and stepped composite lap joints based on different locations of failure initiation. / Kimiaeifar, Amin ; Thomsen, Ole Thybo ; Lund, Erik ; Sørensen, John Dalsgaard.

    I: ASRANET. 2012.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  15. In press

    From EcoDesign to Industrial Metabolism. Redefinition of Sustainable Innovation and Competitive Sustainability.. / Taps, Stig B. ; Petersen, Thomas Ditlev ; Nielsen, Kjeld.

    I: xxxxxxxx, 2012.

    Publikation: Forskning - peer review › Tidsskriftartikel

  16. Udgivet

    Identification of Material Parameters of PVC Foams Using Digital Image Correlation and the Virtual Fields Method. / Wang, Peng ; Pierron, F. ; Thomsen, Ole Thybo.

    I: Proceedings of the 18th International Conference on Composite Materials (ICCM-18). 2012.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  17. Udgivet

    Investigation of failure mechanisms in GFRP sandwich structures with face sheet wrinkle defects used for wind turbine blades. / Leong, Martin Klitgaard ; Overgaard, Lars C.T. ; Thomsen, Ole Thybo ; Lund, Erik ; Daniel, Isaac M..

    I: Composite Structures, Vol. 94, Nr. 2, 2012, s. 768-778.

    Publikation: Forskning - peer review › Tidsskriftartikel

  18. In press

    Large Deflection Analysis of Cantilever Beam under End Point and Distributed Load. / Kimiaeifar, Amin ; Tolou, N. ; Barari, Amin ; Herder, J. L..

    I: Journal of the Chinese Institute of Engineers, 2012.

    Publikation: Forskning - peer review › Tidsskriftartikel

  19. Udgivet

    Mal-positioning Alone Does Not Necessarily Lead to Increased Wear in Metal-on-Metal Hip Resurfacing. / Mellon, Stephen ; Andersen, Michael Skipper ; Grammatopoulos, George ; Gill, Harinderjit.

    I: Proceedings of the ORS 2012 annual meeting. 2012.

    Publikation: Forskning - peer review › Konferenceabstrakt i proceeding

  20. Udgivet

    Multiple part feeding : Real-world application for mobile manipulators. / Hvilshøj, Mads ; Bøgh, Simon ; Nielsen, Oluf Skov ; Madsen, Ole.

    I: Assembly Automation, Vol. 32, Nr. 1, 2012, s. 62-71.

    Publikation: Forskning - peer review › Tidsskriftartikel

  21. In press

    Non-linear structural dynamic behavior of large horizontal-axis wind turbine: a flexible multibody system approach. / Gebhardt, Cristian ; Preidikman, S. ; Jørgensen, Martin Heide ; Massa, J.C..

    I: International Journal of Hydrogen Energy, 2012.

    Publikation: Forskning - peer review › Tidsskriftartikel

  22. Udgivet

    On validation of multibody musculoskeletal models. / Lund, Morten Enemark ; de Zee, Mark ; Andersen, Michael Skipper ; Rasmussen, John.

    I: Institution of Mechanical Engineers. Proceedings. Part H: Journal of Engineering in Medicine, Vol. 226, Nr. 2, 2012, s. 82-94.

    Publikation: Forskning - peer review › Review

  23. E-pub ahead of print

    Properties and semicrystalline structure evolution of polypropylene/montmorillonite nanocomposites under mechanical load. / Stribeck, Norbert ; Zeinolebadi, Ahmed ; Ganjaee Sari, Morteza ; Botta, Stephan ; Jankova, Katja ; Hvilsted, Søren ; Drozdov, Aleksey ; Klitkou, Rasmus ; Potarniche, Catalina-Gabriela ; Christiansen, Jesper de Claville ; Ermini, Valentina.

    I: Macromolecules, 2012.

    Publikation: Forskning - peer review › Tidsskriftartikel

  24. Udgivet

    Reliability Analysis of Adhesive Bonded Scarf Joints. / Kimiaeifar, Amin ; Toft, Henrik Stensgaard ; Lund, Erik ; Thomsen, Ole Thybo ; Sørensen, John Dalsgaard.

    I: Engineering Structures, Vol. 35, 2012, s. 281-287.

    Publikation: Forskning - peer review › Tidsskriftartikel

  25. Afsendt

    Replenishment policies for Empty Containers in an Inland Multi-depot System. / Dang, Vinh Quang ; Nielsen, Izabela Ewa ; Yun, W. Y..

    I: Maritime Economics & Logistics, 2012.

    Publikation: Forskning - peer review › Tidsskriftartikel

  26. Accepteret

    Reverse logistics for Sustainable Mass Customization. / Petersen, Thomas Ditlev ; Nielsen, Kjeld.

    I: Electronic Government, 2012.

    Publikation: Forskning - peer review › Tidsskriftartikel

  27. Afsendt

    Scheduling a Single Mobile Robot for Part-Feeding Tasks of Production Lines. / Dang, Vinh Quang ; Nielsen, Izabela Ewa ; Steger-Jensen, Kenn ; Madsen, Ole.

    I: Journal of Intelligent Manufacturing, 2012.

    Publikation: Forskning - peer review › Tidsskriftartikel

  28. Udgivet

    Scheduling a Single Mobile Robot Incorporated into Production Environment. / Dang, Vinh Quang ; Nielsen, Izabela Ewa ; Steger-Jensen, Kenn.

    I: EcoProduktion & Logistics - new trends and busniess practices. Springer Publishing Company, 2012.

    Publikation: Forskning - peer review › Bidrag til bog/antologi

  29. Accepteret

    Series solution for heat transfer of continues stretching sheet immersed in a micropolar fluid in the existence of radiation. / Shadloo, M.S. ; Kimiaeifar, Amin ; Bagheri, D..

    I: International Journal of Numerical Methods for Heat and Fluid Flow, 2012.

    Publikation: Forskning - peer review › Tidsskriftartikel

  30. Accepteret

    Special Editorial. / Pellerin, R. ; Nielsen, Peter ; Nielsen, Izabela Ewa.

    I: International Journal of Project Organisation and Management, 2012.

    Publikation: Forskning - peer review › Tidsskriftartikel

  31. Udgivet

    Synthesis of clay–carbon nanotube hybrids: Growth of carbon nanotubes in different types of iron modified montmorillonite. / Madaleno, Liliana Andreia Oliveira ; Pyrz, Ryszard ; Jensen, Lars Rosgaard ; Pinto, José J.C. ; Lopes, Augusto B. ; Dolomanova, Viktoriya ; Schjødt-Thomsen, Jan ; Rauhe, Jens Christian M..

    I: Composites Science and Technology, Vol. 72, Nr. 3, 2012, s. 377-381.

    Publikation: Forskning - peer review › Tidsskriftartikel

  32. In press

    Why don't all malpositioned resurfaced cups have high wear? - A dynamic, gait lab study. / Grammatopoulos, G ; Mellon, S ; Andersen, Michael Skipper ; Pandit, H ; Gundle, R ; McLardy- Smith, P ; Murray, D ; Gill, H.

    I: Journal of Bone and Joint Surgery. British Volume. Orthopaedic Proceedings, 2012.

    Publikation: Forskning - peer review › Konferenceabstrakt i tidsskrift

  33. 2011
  34. Udgivet

    Organisering og styring af byggeprocessen : Kapitel 1. / Bejder, Erik ; Wandahl, Søren ; Thomsen, Søren.

    I: Anlægsteknik 2: Styring af byggeprocessen. red. / Søren Fisker. 3.. udg. Kgs. Lyngby : Polyteknisk Boghandel og Forlag, 2011. s. 15-258.

    Publikation: Undervisning › Bidrag til bog/antologi

  35. Udgivet

    The importance of acquaintances - knowledge diffusion in the construction industry. / Christensen, Randi Muff ; Wandahl, Søren ; Ussing, Lene Faber.

    I: 6th Nordic Conference on Construction Economics and Organisation - shaping the construction/Society Nexus: Executive Summaries. red. / Kim Haugbølle ; Stefan Gottlieb ; Kalle Kähkönen ; Ole Klakegg ; Göran Lindahl ; Kristian Widen. Hørsholm : SBI forlag, 2011. s. 27-28.

    Publikation: Forskning - peer review › Konferenceabstrakt i proceeding

  36. Udgivet

    The importance of acquaintances - knowledge diffusion in the construction industry. / Christensen, Randi Muff ; Wandahl, Søren ; Ussing, Lene Faber.

    I: 6th Nordic Conference on Construction Economics and Organisation - shaping the construction/Society Nexus: Volume 2: Transforming Practices. red. / Kim Haugbølle ; Stefan Gottlieb ; Kalle Kähkönen ; Ole Klakegg ; Göran Lindahl ; Kristian Widen. Vol. 2 Hørsholm : SBI forlag, 2011. s. 179-194.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  37. Udgivet

    Musculoskeletal computational analysis of the influence of car-seat design/adjustment on fatigue-induced driving. / Majid, Noor Aliah binti Abdul ; Notomi, Mitsuo ; Rasmussen, John.

    I: Modellering, simulering og anvendt optimering. IEEE Press, 2011. s. 1-6.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  38. Udgivet

    Nonlinear Thermo-mechanical Finite Element Analysis of Polymer Foam Cored Sandwich Structures including Geometrical and Material Nonlinearity. / Palleti, Hara Naga Krishna Teja ; Thomsen, Ole Thybo ; Tahar, Siavash Talebi ; Barton, Janice.

    2011. Abstract from 16th International conference on Composite Structures, Porto, 2011, Porto, Portugal.

    Publikation: Forskning › Konferenceabstrakt til konference

  39. Udgivet

    The Influence of Muscle Forces on the Stress Distribution in the Lumbar Spine. / Wong, Christian ; Rasmussen, John ; Simonsen, Erik Bruun ; Hansen, Lone ; de Zee, Mark ; Dendorfer, Sebastian.

    I: The Open Spine Journal, Vol. 3, 30.12.2011, s. 21-26.

    Publikation: Forskning - peer review › Tidsskriftartikel

  40. Udgivet

    3D Scanning of Object Surfaces Using Structured Light and a Single Camera Image. / Baby, Sanmohan ; Simonsen, Kasper Broegaard ; Balselv, Ivar ; Krüger, Volker ; Dencker, Rene.

    I: Automation Science and Engineering (CASE), 2011 IEEE Conference on. IEEE, 2011. s. 151-156.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  41. Udgivet

    A Clamped-Clamped Beam Static Sag Limits Under Perpendicular Magnetic Force. / Stein, George Juraj ; Darula, Radoslav ; Chmurny, Rudolf.

    I: Engineering Mechanics 2011. red. / Vladimir Fuis. Institute of Thermomechanics, 2011. s. 567-570.

    Publikation: Forskning › Konferenceartikel i proceeding

  42. Udgivet

    Advanced planning and scheduling technology. / Steger-Jensen, Kenn ; Hvolby, Hans-Henrik ; Nielsen, Peter ; Nielsen, Izabela Ewa.

    I: Production Planning & Control, Vol. 22, Nr. 8, 2011, s. 800-808.

    Publikation: Forskning - peer review › Tidsskriftartikel

  43. Udgivet

    Aeroelasticidad de grandes turbinas eólicas de eje horizontal: un enfoque fundado en la dinámica de sistemas multicuerpo. / Gebhardt, Cristian ; Preidikman, S. ; Jørgensen, Martin Heide ; Massa, j.C..

    I: Mecánica Computacional, 2011, s. 1187-1203.

    Publikation: Forskning - peer review › Konferenceartikel i tidsskrift

  44. Udgivet

    As-Sintered AISI 440C Stainless Steels with Improved Hardness and Corrosion Resistance. / Ovri, H. ; Ohaukwu, C.J. ; Bahadirov, K. ; Larsen, Mikael ; Kjeldsteen, P. .

    I: International Journal of Powder Metallurgy, Vol. 46, Nr. 6, 2011, s. 43-50.

    Publikation: Forskning - peer review › Tidsskriftartikel

  45. Udgivet

    Assessment of Interface Shear Strength of Metal-Polymer System based on the Single Filament Fragmentation Test Method. / Thomsen, Ole Thybo ; Mamani, Samuel Charca.

    I: Applied Mechanics and Materials, Vol. 70, 2011, s. 446-451.

    Publikation: Forskning - peer review › Tidsskriftartikel

  46. Udgivet

    Automatic Primitive Segmentation and Action Recognition. / Baby, Sanmohan ; Krüger, Volker ; Kragic, Danica ; Kjellström, Hedwig.

    I: Advanced Robotics, Vol. 25, Nr. 6-7, 2011, s. 871-891.

    Publikation: Forskning - peer review › Tidsskriftartikel

  47. Udgivet

    Autonomous Industrial Mobile Manipulation (AIMM) - Past, present and future. / Hvilshøj, Mads ; Bøgh, Simon ; Nielsen, Oluf Skov ; Madsen, Ole.

    I: Industrial Robot, Vol. 39, Nr. 2, 2011.

    Publikation: Forskning - peer review › Tidsskriftartikel

  48. Udgivet

    Bidirectional Thermo-Mechanical Properties of Foam Core Materials Using DIC. / Tahar, Siavash Talebi ; Thomsen, Ole Thybo ; M Dulieu-Barton, Janice.

    I: Thermomechanics and Infra-Red Imaging. red. / Tom Proulx. Vol. 7 Springer Science+Business Media B.V., 2011. s. 67-74.

    Publikation: Forskning › Konferenceartikel i proceeding

  49. Udgivet

    Block aggregation for strength criteria in multi-material topology design of laminates. / Lund, Erik.

    I: Proceedings of the 24th Nordic Seminar on Computational Mechanics. red. / J. Freund ; R. Kouhia. Aalto University, 2011. s. 128-131.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  50. Udgivet

    Control beam transversal vibration using an electromagnetic vibration controller. / Stein, George Juraj ; Darula, Radoslav ; Chmurny, Rudolf ; Sorokin, Sergey.

    I: Proceeding of the 16th International Acoustic Conference. 2011. s. 95-100.

    Publikation: Forskning › Konferenceartikel i proceeding

  51. Udgivet

    Control of transversal vibrations of a clamped-clamped beam by a permanent magnet and shunt circuit. / Stein, George Juraj ; Darula, Radoslav ; Sorokin, Sergey.

    I: EURODYN 2011. red. / G. De Roeck ; G. Degrande ; G. Lombaert ; G. Muller. Kathoelieke Universiteit, 2011. s. 1735-1741.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  52. Udgivet

    Cyclic viscoelastoplasticity of polypropylene : effects of crystalline structure. / Drozdov, Aleksey ; Christiansen, Jesper de Claville ; Potarniche, Catalina-Gabriela.

    I: Acta Mechanica Sinica, Vol. 221, Nr. 3-4, 2011, s. 201-222.

    Publikation: Forskning - peer review › Tidsskriftartikel

  53. Udgivet

    Data visualization in B&K PULSE LabShop - Tips and Tricks. / Darula, Radoslav ; Hajek, Vladimir.

    I: Proceedings of the 6th International Symposium M-A-P 2011. Technical Univerzity, Zvolen, 2011.

    Publikation: Forskning › Konferenceartikel i proceeding

  54. Udgivet

    Design optimization of machinery mounting systems in light-weight buildings. / Niu, Bin ; Olhoff, Niels.

    I: Proceedings of Forum Acusticum 2011. European Acoustics Association - EAA, 2011. s. 2411-2414.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  55. Udgivet

    DESIGN REQUIREMENTS FOR DESIGNING RESPONSIVE MODULAR MANUFACTURING SYSTEMS. / Jørgensen, Steffen ; Madsen, Ole ; Nielsen, Kjeld ; Jørgensen, Kaj Asbjørn.

    I: Proceedings of the 21st International Conference on Production Research. 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  56. In press

    Energy absorption and failure response of silk/epoxy composite square tubes: Experimental. / Tahar, Siavash Talebi ; Oshkovr, Simin Ataollahi ; A. Eshkoor, Rahim ; Ariffin, Ahmad Kamal ; Azhari, Che Husna.

    I: Composites Part B: Engineering, 2011.

    Publikation: Forskning - peer review › Tidsskriftartikel

  57. Udgivet

    Evaluation of the Interface Strength in Metal/Polymer Composite Systems. / Mamani, Samuel Charca ; Thomsen, Ole Thybo.

    I: Proceedings of the 18th International Conference on Composite Materials (ICCM-18). 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  58. Udgivet

    Full Scale Experimental Characterisation and Non-linear Finite Element Modeling of Load Response of a Composite Wind Turbine Blade. / Laustsen, Steffen ; Lund, Erik ; Thomsen, Ole Thybo ; Kühlmeier, Lennart.

    I: Proceedings of the 18th International Conference on Composite Materials (ICCM-18). 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  59. Udgivet

    Functional Block Copolymers as Compatibilizers for Nanoclays in Polypropylene Nanocomposites. / Jankova, Katja ; Stribeck, Norbert ; Zeinolebadi, Ahmad ; Potarniche, Catalina-Gabriela ; Jensen, Erik Appel ; Christiansen, Jesper de Claville ; Hvilsted, Søren.

    I: Nordic Polymer Days 2011. KTH Mechanics, Royal Institute of Technology, 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  60. Udgivet

    Hydraulic Yaw System for Wind Turbines with New Compact Hydraulic Motor Principle. / Sørensen, Rasmus Mørk ; Hansen, Michael Rygaard ; Mouritsen, Ole Ø..

    I: EWEA 2011 Bruxelles. The European Wind Energy Association, 2011. s. 111-114.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  61. Udgivet

    Identifying and evaluating suitable tasks for autonomous industrial mobile manipulators. / Bøgh, Simon ; Hvilshøj, Mads ; Kristiansen, Morten ; Madsen, Ole.

    I: International Journal of Advanced Manufacturing Technology, 2011.

    Publikation: Forskning - peer review › Tidsskriftartikel

  62. Udgivet

    Influence of Fiber-Matrix Adhesion on Mechanical properties of Glass/Polybutylene Terephthalate Unidirectional Composites. / Pillai, Saju ; Oshkovr, Simin Ataollahi ; Mamani, Samuel Charca ; Prabhakaran, S.M. ; Andersen, R.T. ; Knudsen, T.L. ; Lilholt, H. ; Thomsen, Ole Thybo.

    I: Proceedings of the 18th International Conference on Composite Materials (ICCM-18). 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  63. Udgivet

    INFLUENCE OF FIBER-MATRIX ADHESION ON MECHANICAL PROPERTIES OF UNIDIRECTIONAL GLASS/POLYBUTYLENE TEREPHTHALATE COMPOSITES. / Pillai, Saju ; Oshkovr, Simin Ataollahi ; Mamani, Samuel Charca ; Durai Prabhakaran, R.T. ; Andersen, T.L. ; Knudsen, H. ; Lilholt, H. ; Thomsen, Ole Thybo.

    I: ICCM-18. 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  64. Udgivet

    Influence of Material Nonlinearity on the Thermomechanical Response of Foam Cored Sandwich Structures – FE Modelling and Preliminary Experimental Results. / Palleti, Hara Naga Krishna Teja ; Fruehmann, R.K. ; Thomsen, Ole Thybo ; Dulieu-Barton, J.M..

    I: Proceedings of the 18th International Conference on Composite Materials (ICCM-18). 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  65. Udgivet

    Innovations in Mechatronic Products and Mass Customization. / Habib, Tufail ; Jørgensen, Kaj Asbjørn ; Nielsen, Kjeld.

    I: Proceedings of the MCPC 2011 Conference on Mass Customization, Personalization and Co-Creation: Bridging Mass Customization and Open Innovation. red. / Henry Chesbrough ; Frank T. Piller ; Mitchell Tseng. 2011. (Haas School of Business, University of California, Berkeley).

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  66. Udgivet

    Is Mass Customization Sustainable?. / Petersen, Thomas Ditlev ; Jørgensen, Kaj Asbjørn ; Nielsen, Kjeld ; Taps, Stig B..

    I: Proceedings of the MCPC 2011 Conference on Mass Customization, Personalization and Co-Creation: Bridging Mass Customization and Open Innovation. red. / Henry Chesbrough ; Frank T. Piller ; Mitchell Tseng. 2011. (Haas School of Business, University of California, Berkeley).

    Publikation: Forskning › Konferenceartikel i proceeding

  67. Udgivet

    Large deformation analysis of Euler-Bernoulli beamshell under own weight based on HAM. / Sohouli, A.R. ; Kimiaeifar, Amin ; Mohsenzadeh, A..

    I: Central European Journal of Engineering, Vol. 2, Nr. 1, 2011, s. 146-153.

    Publikation: Forskning - peer review › Tidsskriftartikel

  68. Udgivet

    Lumped parameter modeling of dynamics of a roller on a grinding table. / Sorokin, Sergey ; Søe-Knudsen, Alf ; Zadeh, Maziyar Nesari ; Kvistgaard, Erik .

    I: 18th International Congress on Sound and Vibration. red. / Ricardo E. Musafir. The International Institute of Acoustics and Vibration (IIAV), 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  69. Udgivet

    Machinery installation design in a lightweight building. / Olhoff, Niels ; Niu, Bin.

    I: 9th World Congress on Structural and Multidisciplinary Optimization. 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  70. Udgivet

    Material interpolation schemes for unified topology and multi-material optimization. / Hvejsel, Christian Gram ; Lund, Erik.

    I: Structural and Multidisciplinary Optimization, Vol. 43, Nr. 6, 2011, s. 811-825.

    Publikation: Forskning - peer review › Tidsskriftartikel

  71. Udgivet

    MEASUREMENT OF MECHANICAL PROPERTIES OF PVC FOAM USING A MODIFIED ARCAN FIXTURE. / Tahar, Siavash Talebi ; Thomsen, Ole Thybo ; M. Dulieu-Barton, Janice ; Znang, Shufeng.

    2011. Paper presented at the 5th International Conference on Composites Testing and Model Identification, Lausanne, Schweiz.

    Publikation: Forskning - peer review › Paper uden forlag/tidsskrift

  72. Udgivet

    Mechanical Characterisation of PVC Foam Using Digital Image Correlation and Nonlinear Analysis. / Tahar, Siavash Talebi ; Thomsen, Ole Thybo ; Dulieu-Barton, J.M..

    I: Proceedings of the 18th International Conference on Composite Materials (ICCM-18). 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  73. Udgivet

    MECHANICAL CHARACTERIZATION OF PVC FOAM USING DIGITAL IMAGE CORRELATION AND NONLINEAR FE ANALYSIS. / Tahar, Siavash Talebi ; Thomsen, Ole Thybo ; M. Dulieu-Barton, Janice.

    2011. Paper presented at 18 international conference on composite materials, Jeju Island, Sydkorea.

    Publikation: Forskning - peer review › Paper uden forlag/tidsskrift

  74. Udgivet

    Minimizing structure-borne noise of rotating machinery in the room of a light-weight building. / Niu, Bin ; Olhoff, Niels ; Larsen, Jan Balle.

    I: Proceedings of the 24th Nordic Seminar on Computational Mechanics. red. / R. Freund ; R. Kouhia. 2011. s. 115-118.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  75. Udgivet

    Modelling of Physical Human-Robot Interaction for Exoskeleton Designs. / Bai, Shaoping ; Rasmussen, John.

    2011.

    Publikation: Forskning › Paper uden forlag/tidsskrift

  76. Udgivet

    Modularizing Mechatronic Products for Mass Customization. / Habib, Tufail ; Nielsen, Kjeld ; Jørgensen, Kaj Asbjørn.

    I: : Proceedings of the 21st International Conference on Production Research, ICPR 2011. Fraunhofer Verlag, 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  77. Udgivet

    Morphology study of layered silicate/chitosan nanohybrids. / Potarniche, Catalina-Gabriela ; Vuluga, Z. ; Donescu, D. ; Christiansen, Jesper de Claville ; Eugeniu, V. ; Radovici, IC. ; Serban, S. ; Ghiurea, M. ; Somoghi, R. ; Beckmann, S..

    I: Surface and Interface Analysis, Vol. 44, Nr. 2, 2011, s. 200-207.

    Publikation: Forskning - peer review › Tidsskriftartikel

  78. Udgivet

    Nanomaterials in biomedical applications. / Christiansen, Jesper de Claville ; Potarniche, Catalina-Gabriela ; Vuluga, Z. ; Drozdov, Aleksey.

    I: 2nd International Conference on Wireless Communications Vehicular Technology, Information Theory and Aerospace & Electronic Systems Technology. River Publishers, 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  79. Udgivet

    Non-linear structural dynamic bahavior of large horizontal-axis wind turbines: a flexible multibody system approach. / Gebhardt, Cristian ; Preidikman, S. ; Jørgensen, Martin Heide ; Massa, J.C..

    I: the proceedings of the 4º Congreso Nacional - 3° Congreso Iberoamericano HIDRÓGENO Y FUENTES SUSTENTABLES DE ENERGíA. 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  80. Udgivet

    Nonlinear buckling optimization of laminated composites including "worst" shape imperfections. / Lund, Erik ; Lindgaard, Esben.

    I: Proceedings of the 18th International Conference on Composite Materials. 2011.

    Publikation: Forskning - peer review › Konferenceabstrakt i proceeding

  81. Udgivet

    Numerical Simulations of Electromagnet Exposed to Vibration. / Darula, Radoslav ; Sorokin, Sergey ; Stein, George Juraj.

    I: 13th Conference on Applied Mechanics 2011. red. / L. Nahlik ; M. Zouhar ; M. Sevcik ; S. Seitl ; Z. Majer. 2011. s. 31-34.

    Publikation: Forskning › Konferenceartikel i proceeding

  82. Udgivet

    Numerical simulations of large scale wind turbine blades - limitations and challenges. / Lund, Erik ; Hansen, Anders Libak.

    I: Composite materials for structural performance: towards gigher limits: Proceedings of the 32nd Risø International Symposium in Materials Science. red. / S. Fæster ; D. Juul Jensen ; B.F. Sørensen. Danmarks Tekniske Universitet, Risø Nationallaboratoriet for Bæredygtig Energi, 2011. s. 59-78.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  83. Udgivet

    On strength criteria in multi-material topology optimization of laminated composite structures. / Lund, Erik ; Hvejsel, Christian Frier ; Sørensen, Søren Nørgaard.

    I: Book of Abstracts, pth World Congress on Structural and Multidisciplinary Optimization. 2011. s. 31.

    Publikation: Forskning - peer review › Konferenceabstrakt i proceeding

  84. Udgivet

    Optimization strategies for discrete multi-material stiffness optimization. / Hvejsel, Christian Gram ; Lund, Erik ; Stolpe, Mathias.

    I: Structural and Multidisciplinary Optimization, Vol. 44, Nr. 2, 2011, s. 149-163.

    Publikation: Forskning - peer review › Tidsskriftartikel

  85. Udgivet

    Prediction of the Movement Patterns for Human Squat Jumping using the Inverse-Inverse Dynamics Technique. / Farahani, Saeed Davoudabadi ; de Zee, Mark ; Andersen, Michael Skipper ; Lund, Morten Enemark ; Rasmussen, John.

    2011. Paper presented at XIII International Symposium on Computer Simulation in Biomechanics , Leuven, Belgien.

    Publikation: Forskning - peer review › Paper uden forlag/tidsskrift

  86. Udgivet

    Projektforslag AAU FIB 14. / Kepler, Jørgen Asbøl ; Jensen, Erik Appel ; Jensen, Lars Rosgaard.

    Aalborg Universitetsforlag, 2011.

    Publikation: Forskning - peer review › Rapport

  87. Udgivet

    Reconfigurable Manufacturing Systems as an Application of Mass Customisation. / Jørgensen, Steffen ; Nielsen, Kjeld ; Jørgensen, Kaj Asbjørn.

    I: International Journal of Industrial Engineering and Management , Vol. 1, Nr. 3, 2011, s. 111-119.

    Publikation: Forskning - peer review › Tidsskriftartikel

  88. Udgivet

    Reducing the integration error of cohesive elements. / Bak, Brian Lau Verndal ; Lund, Erik.

    I: Proceedings of the 24th Nordic Seminar on Computational Mechanics. red. / J. Freund ; R. Kouhia. Aalto University, 2011. s. 85-88.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  89. Udgivet

    Relevance of Academic Internship to the Quality in Construction Management Education. / Wandahl, Søren ; Olsen, Willy ; Ussing, Lene Faber.

    I: International Journal of Engineering Education, Vol. 27, Nr. 5, 2011, s. 1046-1053.

    Publikation: Forskning - peer review › Tidsskriftartikel

  90. Udgivet

    Reliability Analysis o Stepped Lap Composite Joints Based on Different Failure Criteria. / Kimiaeifar, Amin ; Lund, Erik ; Thomsen, Ole Thybo ; Sørensen, John Dalsgaard.

    I: Proceedings of the 18th International Conference on Composite Materials, ICCM-18. 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  91. Udgivet

    Reliability Analysis of Adhesive Bonded Stepped Lap Composite Joints Based on Different Failure Criteria. / Kimiaeifar, Amin ; Lund, Erik ; Thomsen, Ole Thybo ; Sørensen, John Dalsgaard.

    I: Proceedings of the 18th International Conference on Composite Materials (ICCM-18). 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  92. Udgivet

    Scheduling a Single Mobile Robot for Feeding Tasks in a Manufacturing Cell. / Dang, Vinh Quang ; Nielsen, Izabela Ewa ; Steger-Jensen, Kenn.

    I: Proceedings of APMS. University of Stavanger, 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  93. Udgivet

    Solving Electro-Magneto-Mechanical Coupled System by Means of Method of Multiple Scales. / Darula, Radoslav.

    I: Proceedings of 13th Internal DCAMM Symposium. Danmarks Tekniske Universitet, DTU, 2011.

    Publikation: Forskning - peer review › Konferenceabstrakt i proceeding

  94. Udgivet

    Special issue on "Applied simulation, planning and scheduling techniques in industry. / Nielsen, Peter ; Nielsen, Izabela Ewa ; Pellerin, R. ; Hvolby, Hans-Henrik.

    I: Production Planning & Control, Vol. 22, Nr. 8, 2011, s. 725-726.

    Publikation: Forskning - peer review › Tidsskriftartikel

  95. Udgivet

    Steel fiber reinforced polyester composites – Compression failure analysis. / Prabhakaran, R.T. ; Andersen, T.L. ; Bech, J.I. ; Mikkelsen, L.P. ; Lilholt, H. ; Mamani, Samuel Charca ; Pillai, Saju ; Thomsen, Ole Thybo.

    I: Proceedings of the 26th ASC Annual Technical Conference (the Second Joint US-Canada Conference on Composites). 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  96. Udgivet

    STRUCTURAL AND FUNCTIONAL VIEWS OF MECHATRONIC PRODUCTS. / Nielsen, Kjeld ; Petersen, Thomas Ditlev ; Jørgensen, Kaj Asbjørn.

    I: In proceedings of 21st International Conference on Production Research. red. / Dieter Spath ; Rolf Ilg ; Tobias Krause. 2011.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  97. Udgivet

    Supporting Sustainability and Personalization with Product Architecture. / Nielsen, Kjeld ; Jørgensen, Kaj Asbjørn ; Taps, Stig B. ; Petersen, Thomas Ditlev.

    I: Proceedings of the MCPC 2011 Conference on Mass Customization, Personalization and Co-Creation: Bridging Mass Customization and Open Innovation. red. / Henry Chesbrough ; Frank T. Piller ; Mitchell Tseng. 2011. (Haas School of Business, University of California, Berkeley).

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  98. Udgivet

    Thickness optimization of fiber reinforced composite laminates with the discrete matrial optimization method. / Sørensen, Søren Nørgaard ; Lund, Erik.

    I: Proceedings of the 24th Nordic Seminar on Computational Mechanics. Aalto University, 2011. s. 124-127.

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  99. Udgivet

    Utilizing Mass Customization Methods for Modular Manufacturing System Design. / Jørgensen, Steffen ; Jacobsen, Alexia ; Nielsen, Kjeld ; Madsen, Ole ; Jørgensen, Kaj Asbjørn.

    I: Proceedings of the MCPC 2011 Conference on Mass Customization, Personalization and Co-Creation: Bridging Mass Customization and Open Innovation. red. / Henry Chesbrough ; Frank T. Piller ; Mitchell Tseng. 2011. (Haas School of Business, University of California, Berkeley).

    Publikation: Forskning - peer review › Konferenceartikel i proceeding

  100. Udgivet

    Vibro-acoustic Paths and their Impact on Vibro-Acoustic Signal Strength. / Darula, Radoslav ; Ziaran, Stanislav.

    I: Noise and vibration in Practice. red. / Stanislav Ziaran. Slovak Technical University, 2011. s. 17-20.

    Publikation: Forskning › Konferenceartikel i proceeding

  101. Udgivet

    Volume growth and viscoplasticity of polymer/clay nanocomposites : Experiments and modeling . / Drozdov, Aleksey ; Christiansen, Jesper de Claville ; Klitkou, Rasmus.

    I: International Journal of Applied Mathematics and Mechanics, Vol. 7, Nr. 17, 2011, s. 87-110.

    Publikation: Forskning - peer review › Tidsskriftartikel

  102. 2010
  103. Udgivet

    Nonlinear Time-dependent Response of Polypropylene/Nanoclay Melts: Experiments and Modeling. / A.D., Drozdov ; Jensen, Erik Appel ; Christiansen, Jesper de Claville.

    I: Computational Materials Science, Vol. 47, Nr. 3, 01.01.2010, s. 807-816.

    Publikation: Forskning - peer review › Tidsskriftartikel

Forrige 1 2 3 4 5 6 7 8 ...23 Næste

© Videnbasen, Aalborg Universitet · vbn@aub.aau.dk · Om VBN