A 3-5GHz UWB CMOS Receiver with Digital Control Technique
Publikation: Forskning - peer review › Konferenceartikel i proceeding
Standard
A 3-5GHz UWB CMOS Receiver with Digital Control Technique. / Han, Bo; Liu, Mengmeng; Ge, Ning.
Proceeding of 13th International Symposium on Design and Diagnostics of Electronic Circuits and System 2010.IEEE. 2010. s. 157-160.Publikation: Forskning - peer review › Konferenceartikel i proceeding
Harvard
APA
CBE
MLA
Vancouver
Author
Bibtex
}
RIS
TY - GEN
T1 - A 3-5GHz UWB CMOS Receiver with Digital Control Technique
A1 - Han,Bo
A1 - Liu,Mengmeng
A1 - Ge,Ning
AU - Han,Bo
AU - Liu,Mengmeng
AU - Ge,Ning
PY - 2010/4/11
Y1 - 2010/4/11
N2 - This article presents a CMOS receiver that works for 3-5GHz low band SC-UWB. The receiver contains PLL, Mixer, and VGA. Double down conversion is adopted in the receiver to overcome the orthogonal clock design difficulty; digital assisted RF control method is used to increase the stability. This receiver was fabricated in SMIC01.8mmRF process with chip area of 1 × 1 mm2 ;according to measurement, this receiver has bandwidth of 500MHz; VGA control range is 30dB; IIP3 is -10dBm;IF port output is 250mVp-p; the power consumption is 36mW with supplying voltage 1.8V.
AB - This article presents a CMOS receiver that works for 3-5GHz low band SC-UWB. The receiver contains PLL, Mixer, and VGA. Double down conversion is adopted in the receiver to overcome the orthogonal clock design difficulty; digital assisted RF control method is used to increase the stability. This receiver was fabricated in SMIC01.8mmRF process with chip area of 1 × 1 mm2 ;according to measurement, this receiver has bandwidth of 500MHz; VGA control range is 30dB; IIP3 is -10dBm;IF port output is 250mVp-p; the power consumption is 36mW with supplying voltage 1.8V.
KW - Digital-assisted RF
KW - UWB
KW - VGA
U2 - 10.1109/DDECS.2010.5491794
DO - 10.1109/DDECS.2010.5491794
BT - Proceeding of 13th International Symposium on Design and Diagnostics of Electronic Circuits and System 2010.IEEE
T2 - Proceeding of 13th International Symposium on Design and Diagnostics of Electronic Circuits and System 2010.IEEE
SP - 157
EP - 160
ER -