A novel switched inductor configuration for modified SEPIC DC-to-DC converter for renewable energy application

Pandav Kiran Maroti; Sanjeevikumar Padmanaban; Frede Blaabjerg; Viliam Fedák; Pierluigi Siano; Vigna K. Ramachandaramurthy

doi:10.1109/CENCON.2017.8262487

A novel switched inductor configuration for modified SEPIC DC-to-DC converter for renewable energy application

Pandav Kiran Maroti, Sanjeevikumar Padmanaban, Frede Blaabjerg, Viliam Fedák, Pierluigi Siano, Vigna K. Ramachandaramurthy

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

14 Citationer (Scopus)

Abstract

The proposed work is on the Modified SEPIC Converter (MSC) and its different configuration with switched inductor structure (SI). In this paper, five different configuration of modified SEPIC Converter namely-Modified SEPIC converter without switched inductor configuration (MSC-LLL), Modified SEPIC Converter with XLL switched inductor configuration (MSC-XLL), Modified SEPIC Converter with LYL switched inductor configuration (MSC-LYL), Modified SEPIC Converter with LLZ switched inductor configuration (MSC-LLZ), Modified SEPIC Converter with XYZ switched inductor configuration (MSC-XYZ) is represented with their mathematical analysis and comparison is done on the basis of the voltage gain and the components count. The advantage of the MSC configurations is a high voltage gain ratio with a single control device and a few passive components. The feasibility of five different configurations of MSC is achieved on the basis of Matlab Simulink. The five different configurations are simulated for 250 W and 50 KHz switching frequency.

Originalsprog	Engelsk
Titel	Proceedings of 2017 IEEE Conference on Energy Conversion (CENCON)
Antal sider	6
Forlag	IEEE Press
Publikationsdato	okt. 2017
Sider	218-223
ISBN (Elektronisk)	978-1-5386-3935-1
DOI	https://doi.org/10.1109/CENCON.2017.8262487
Status	Udgivet - okt. 2017
Begivenhed	2017 IEEE Conference on Energy Conversion (CENCON) - Kuala Lumpur, Malaysia Varighed: 30 okt. 2017 → 31 okt. 2017

Konference

Konference	2017 IEEE Conference on Energy Conversion (CENCON)
Land/Område	Malaysia
By	Kuala Lumpur
Periode	30/10/2017 → 31/10/2017

Adgang til dokumentet

10.1109/CENCON.2017.8262487

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

@inproceedings{119648fa3d324542a9fa889e2a00d0ba,

title = "A novel switched inductor configuration for modified SEPIC DC-to-DC converter for renewable energy application",

abstract = "The proposed work is on the Modified SEPIC Converter (MSC) and its different configuration with switched inductor structure (SI). In this paper, five different configuration of modified SEPIC Converter namely-Modified SEPIC converter without switched inductor configuration (MSC-LLL), Modified SEPIC Converter with XLL switched inductor configuration (MSC-XLL), Modified SEPIC Converter with LYL switched inductor configuration (MSC-LYL), Modified SEPIC Converter with LLZ switched inductor configuration (MSC-LLZ), Modified SEPIC Converter with XYZ switched inductor configuration (MSC-XYZ) is represented with their mathematical analysis and comparison is done on the basis of the voltage gain and the components count. The advantage of the MSC configurations is a high voltage gain ratio with a single control device and a few passive components. The feasibility of five different configurations of MSC is achieved on the basis of Matlab Simulink. The five different configurations are simulated for 250 W and 50 KHz switching frequency.",

author = "Maroti, {Pandav Kiran} and Sanjeevikumar Padmanaban and Frede Blaabjerg and Viliam Fed{\'a}k and Pierluigi Siano and Ramachandaramurthy, {Vigna K.}",

year = "2017",

month = oct,

doi = "10.1109/CENCON.2017.8262487",

language = "English",

pages = "218--223",

booktitle = "Proceedings of 2017 IEEE Conference on Energy Conversion (CENCON)",

publisher = "IEEE Press",

note = "2017 IEEE Conference on Energy Conversion (CENCON) ; Conference date: 30-10-2017 Through 31-10-2017",

}

Maroti, PK, Padmanaban, S, Blaabjerg, F, Fedák, V, Siano, P & Ramachandaramurthy, VK 2017, A novel switched inductor configuration for modified SEPIC DC-to-DC converter for renewable energy application. i Proceedings of 2017 IEEE Conference on Energy Conversion (CENCON). IEEE Press, s. 218-223, 2017 IEEE Conference on Energy Conversion (CENCON), Kuala Lumpur, Malaysia, 30/10/2017. https://doi.org/10.1109/CENCON.2017.8262487

A novel switched inductor configuration for modified SEPIC DC-to-DC converter for renewable energy application. / Maroti, Pandav Kiran; Padmanaban, Sanjeevikumar; Blaabjerg, Frede et al.
Proceedings of 2017 IEEE Conference on Energy Conversion (CENCON). IEEE Press, 2017. s. 218-223.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - A novel switched inductor configuration for modified SEPIC DC-to-DC converter for renewable energy application

AU - Maroti, Pandav Kiran

AU - Padmanaban, Sanjeevikumar

AU - Blaabjerg, Frede

AU - Fedák, Viliam

AU - Siano, Pierluigi

AU - Ramachandaramurthy, Vigna K.

PY - 2017/10

Y1 - 2017/10

N2 - The proposed work is on the Modified SEPIC Converter (MSC) and its different configuration with switched inductor structure (SI). In this paper, five different configuration of modified SEPIC Converter namely-Modified SEPIC converter without switched inductor configuration (MSC-LLL), Modified SEPIC Converter with XLL switched inductor configuration (MSC-XLL), Modified SEPIC Converter with LYL switched inductor configuration (MSC-LYL), Modified SEPIC Converter with LLZ switched inductor configuration (MSC-LLZ), Modified SEPIC Converter with XYZ switched inductor configuration (MSC-XYZ) is represented with their mathematical analysis and comparison is done on the basis of the voltage gain and the components count. The advantage of the MSC configurations is a high voltage gain ratio with a single control device and a few passive components. The feasibility of five different configurations of MSC is achieved on the basis of Matlab Simulink. The five different configurations are simulated for 250 W and 50 KHz switching frequency.

AB - The proposed work is on the Modified SEPIC Converter (MSC) and its different configuration with switched inductor structure (SI). In this paper, five different configuration of modified SEPIC Converter namely-Modified SEPIC converter without switched inductor configuration (MSC-LLL), Modified SEPIC Converter with XLL switched inductor configuration (MSC-XLL), Modified SEPIC Converter with LYL switched inductor configuration (MSC-LYL), Modified SEPIC Converter with LLZ switched inductor configuration (MSC-LLZ), Modified SEPIC Converter with XYZ switched inductor configuration (MSC-XYZ) is represented with their mathematical analysis and comparison is done on the basis of the voltage gain and the components count. The advantage of the MSC configurations is a high voltage gain ratio with a single control device and a few passive components. The feasibility of five different configurations of MSC is achieved on the basis of Matlab Simulink. The five different configurations are simulated for 250 W and 50 KHz switching frequency.

U2 - 10.1109/CENCON.2017.8262487

DO - 10.1109/CENCON.2017.8262487

M3 - Article in proceeding

SP - 218

EP - 223

BT - Proceedings of 2017 IEEE Conference on Energy Conversion (CENCON)

PB - IEEE Press

T2 - 2017 IEEE Conference on Energy Conversion (CENCON)

Y2 - 30 October 2017 through 31 October 2017

ER -

A novel switched inductor configuration for modified SEPIC DC-to-DC converter for renewable energy application

Abstract

Konference

Adgang til dokumentet

AUB Link

Fingeraftryk

Citationsformater