A Reliability-Oriented Design Method for Power Electronic Converters

Huai Wang; Dao Zhou; Frede Blaabjerg

doi:10.1109/APEC.2013.6520713

A Reliability-Oriented Design Method for Power Electronic Converters

AAU Energi

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

39 Citationer (Scopus)

1750 Downloads (Pure)

Abstract

Reliability is a crucial performance indicator of power electronic systems in terms of availability, mission accomplishment and life cycle cost. A paradigm shift in the research on reliability of power electronics is going on from simple handbook based calculations (e.g. models in MIL-HDBK-217F handbook) to the physics-of-failure approach and design for reliability process. A systematic design procedure consisting of various design tools is presented in this paper to design reliability into the power electronic converters since the early concept phase. The corresponding design procedures and reliability prediction models are provided. A case study on a 2.3 MW wind power converter is discussed with emphasis on the reliability critical component IGBT modules.

Originalsprog	Engelsk
Titel	2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC 2013)
Antal sider	8
Forlag	IEEE Press
Publikationsdato	2013
Sider	2921-2928
ISBN (Trykt)	978-1-4673-4354-1
ISBN (Elektronisk)	978-1-4673-4353-4
DOI	https://doi.org/10.1109/APEC.2013.6520713
Status	Udgivet - 2013
Begivenhed	IEEE Applied Power Electronics Conference and Exposition, APEC 2013 - Long Beach, CA, USA Varighed: 17 mar. 2013 → 21 mar. 2013

Konference

Konference	IEEE Applied Power Electronics Conference and Exposition, APEC 2013
Land/Område	USA
By	Long Beach, CA
Periode	17/03/2013 → 21/03/2013

Navn	I E E E Applied Power Electronics Conference and Exposition. Conference Proceedings
ISSN	1048-2334

Adgang til dokumentet

10.1109/APEC.2013.6520713

PaperIndsendt manuskript, 1,85 MB

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Andre filer og links

Link to publication in Scopus

Center Of Reliable Power Electronics (CORPE)
Blaabjerg, F., Munk-Nielsen, S., Pedersen, K. & Popok, V.
01/04/2011 → 31/12/2016
Projekter: Projekt › Forskning

IEEE Applied Power Electronics Conference and Exposition, APEC 2013
Huai Wang (Oplægsholder)
17 mar. 2013 → 21 mar. 2013
Aktivitet: Foredrag og mundtlige bidrag › Konferenceoplæg

Citationsformater

@inproceedings{39fbb8c180a8499c9f506f3727c62415,

title = "A Reliability-Oriented Design Method for Power Electronic Converters",

abstract = "Reliability is a crucial performance indicator of power electronic systems in terms of availability, mission accomplishment and life cycle cost. A paradigm shift in the research on reliability of power electronics is going on from simple handbook based calculations (e.g. models in MIL-HDBK-217F handbook) to the physics-of-failure approach and design for reliability process. A systematic design procedure consisting of various design tools is presented in this paper to design reliability into the power electronic converters since the early concept phase. The corresponding design procedures and reliability prediction models are provided. A case study on a 2.3 MW wind power converter is discussed with emphasis on the reliability critical component IGBT modules.",

author = "Huai Wang and Dao Zhou and Frede Blaabjerg",

year = "2013",

doi = "10.1109/APEC.2013.6520713",

language = "English",

isbn = "978-1-4673-4354-1 ",

series = "I E E E Applied Power Electronics Conference and Exposition. Conference Proceedings",

publisher = "IEEE Press",

pages = "2921--2928",

booktitle = "2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC 2013)",

note = "IEEE Applied Power Electronics Conference and Exposition, APEC 2013 ; Conference date: 17-03-2013 Through 21-03-2013",

}

Wang, H , Zhou, D & Blaabjerg, F 2013, A Reliability-Oriented Design Method for Power Electronic Converters. i 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC 2013). IEEE Press, I E E E Applied Power Electronics Conference and Exposition. Conference Proceedings, s. 2921-2928, IEEE Applied Power Electronics Conference and Exposition, APEC 2013, Long Beach, CA, USA, 17/03/2013. https://doi.org/10.1109/APEC.2013.6520713

A Reliability-Oriented Design Method for Power Electronic Converters. / Wang, Huai ; Zhou, Dao ; Blaabjerg, Frede.
2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC 2013). IEEE Press, 2013. s. 2921-2928 (I E E E Applied Power Electronics Conference and Exposition. Conference Proceedings).

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - A Reliability-Oriented Design Method for Power Electronic Converters

AU - Wang, Huai

AU - Zhou, Dao

AU - Blaabjerg, Frede

PY - 2013

Y1 - 2013

N2 - Reliability is a crucial performance indicator of power electronic systems in terms of availability, mission accomplishment and life cycle cost. A paradigm shift in the research on reliability of power electronics is going on from simple handbook based calculations (e.g. models in MIL-HDBK-217F handbook) to the physics-of-failure approach and design for reliability process. A systematic design procedure consisting of various design tools is presented in this paper to design reliability into the power electronic converters since the early concept phase. The corresponding design procedures and reliability prediction models are provided. A case study on a 2.3 MW wind power converter is discussed with emphasis on the reliability critical component IGBT modules.

AB - Reliability is a crucial performance indicator of power electronic systems in terms of availability, mission accomplishment and life cycle cost. A paradigm shift in the research on reliability of power electronics is going on from simple handbook based calculations (e.g. models in MIL-HDBK-217F handbook) to the physics-of-failure approach and design for reliability process. A systematic design procedure consisting of various design tools is presented in this paper to design reliability into the power electronic converters since the early concept phase. The corresponding design procedures and reliability prediction models are provided. A case study on a 2.3 MW wind power converter is discussed with emphasis on the reliability critical component IGBT modules.

UR - http://www.scopus.com/inward/record.url?scp=84879363505&partnerID=8YFLogxK

U2 - 10.1109/APEC.2013.6520713

DO - 10.1109/APEC.2013.6520713

M3 - Article in proceeding

SN - 978-1-4673-4354-1

T3 - I E E E Applied Power Electronics Conference and Exposition. Conference Proceedings

SP - 2921

EP - 2928

BT - 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC 2013)

PB - IEEE Press

T2 - IEEE Applied Power Electronics Conference and Exposition, APEC 2013

Y2 - 17 March 2013 through 21 March 2013

ER -

A Reliability-Oriented Design Method for Power Electronic Converters

Abstract

Konference

Adgang til dokumentet

AUB Link

Andre filer og links

Fingeraftryk

Projekter

Center Of Reliable Power Electronics (CORPE)

Aktiviteter

IEEE Applied Power Electronics Conference and Exposition, APEC 2013

Citationsformater