Alternative parameter determination methods for a PMSG

Theodoros Kalogiannis; Elena Malz; Enrique Muller Llano; Lennart Petersen; Marie Schimmelmann; Krisztina Leban; Ewen Ritchie

doi:10.1109/OPTIM.2014.6850897

Alternative parameter determination methods for a PMSG

Theodoros Kalogiannis, Elena Malz, Enrique Muller Llano, Lennart Petersen, Marie Schimmelmann, Krisztina Leban, Ewen Ritchie

AAU Energi

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

4 Citationer (Scopus)

Abstract

One of the fundamental requirements for testing and analysing a Permanent Magnet Synchronous Generator (PMSG) is to obtain its electrical and mechanical parameters. This paper describes the test set up and the procedure for obtaining them. Stator resistance and flux linkage measurements follow IEEE standards. In the other hand a new approach for an alternative stator inductance and inertia measurement is analysed. More precisely, the former is obtained through laboratory work based on the locked rotor test, and the latter through a CAD software based on a 3D model. In order to assess and validate the obtained values, an electromechanical model is derived for validation and contribution of the whole project. Finally, small relative errors between measured and simulated values indicate the functionality of the used methods and of the machine.

Originalsprog	Engelsk
Titel	Proceedings of the International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2014
Antal sider	6
Forlag	IEEE Computer Society Press
Publikationsdato	maj 2014
Sider	483-488
Artikelnummer	6850897
ISBN (Trykt)	9781479951833
DOI	https://doi.org/10.1109/OPTIM.2014.6850897
Status	Udgivet - maj 2014
Begivenhed	International Conference on Optimization of Electrical and Electronic Equipment - Brasov, Rumænien Varighed: 22 maj 2014 → 24 maj 2014 Konferencens nummer: 14th

Konference

Konference	International Conference on Optimization of Electrical and Electronic Equipment
Nummer	14th
Land/Område	Rumænien
By	Brasov
Periode	22/05/2014 → 24/05/2014

Navn	Optimization of Electrical and Electronic Equipment (OPTIM), Proceedings
ISSN	1842-0133

Adgang til dokumentet

10.1109/OPTIM.2014.6850897

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

Kalogiannis, T., Malz, E., Llano, E. M., Petersen, L., Schimmelmann, M., Leban, K., & Ritchie, E. (2014). Alternative parameter determination methods for a PMSG. I Proceedings of the International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2014 (s. 483-488). Artikel 6850897 IEEE Computer Society Press. https://doi.org/10.1109/OPTIM.2014.6850897

@inproceedings{1260e36d96774798a378a5e4f07de25b,

title = "Alternative parameter determination methods for a PMSG",

abstract = "One of the fundamental requirements for testing and analysing a Permanent Magnet Synchronous Generator (PMSG) is to obtain its electrical and mechanical parameters. This paper describes the test set up and the procedure for obtaining them. Stator resistance and flux linkage measurements follow IEEE standards. In the other hand a new approach for an alternative stator inductance and inertia measurement is analysed. More precisely, the former is obtained through laboratory work based on the locked rotor test, and the latter through a CAD software based on a 3D model. In order to assess and validate the obtained values, an electromechanical model is derived for validation and contribution of the whole project. Finally, small relative errors between measured and simulated values indicate the functionality of the used methods and of the machine. ",

keywords = "Electrical parameters, Mechanical parameters, Permanent magnet synchronous generator, Stator inductance",

author = "Theodoros Kalogiannis and Elena Malz and Llano, {Enrique Muller} and Lennart Petersen and Marie Schimmelmann and Krisztina Leban and Ewen Ritchie",

year = "2014",

month = may,

doi = "10.1109/OPTIM.2014.6850897",

language = "English",

isbn = "9781479951833",

series = "Optimization of Electrical and Electronic Equipment (OPTIM), Proceedings",

publisher = "IEEE Computer Society Press",

pages = "483--488",

booktitle = "Proceedings of the International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2014",

address = "United States",

note = "International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2014 ; Conference date: 22-05-2014 Through 24-05-2014",

}

Kalogiannis, T, Malz, E, Llano, EM, Petersen, L, Schimmelmann, M, Leban, K & Ritchie, E 2014, Alternative parameter determination methods for a PMSG. i Proceedings of the International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2014., 6850897, IEEE Computer Society Press, Optimization of Electrical and Electronic Equipment (OPTIM), Proceedings, s. 483-488, International Conference on Optimization of Electrical and Electronic Equipment, Brasov, Rumænien, 22/05/2014. https://doi.org/10.1109/OPTIM.2014.6850897

Alternative parameter determination methods for a PMSG. / Kalogiannis, Theodoros; Malz, Elena; Llano, Enrique Muller et al.
Proceedings of the International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2014. IEEE Computer Society Press, 2014. s. 483-488 6850897 (Optimization of Electrical and Electronic Equipment (OPTIM), Proceedings).

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Alternative parameter determination methods for a PMSG

AU - Kalogiannis, Theodoros

AU - Malz, Elena

AU - Llano, Enrique Muller

AU - Petersen, Lennart

AU - Schimmelmann, Marie

AU - Leban, Krisztina

AU - Ritchie, Ewen

N1 - Conference code: 14th

PY - 2014/5

Y1 - 2014/5

N2 - One of the fundamental requirements for testing and analysing a Permanent Magnet Synchronous Generator (PMSG) is to obtain its electrical and mechanical parameters. This paper describes the test set up and the procedure for obtaining them. Stator resistance and flux linkage measurements follow IEEE standards. In the other hand a new approach for an alternative stator inductance and inertia measurement is analysed. More precisely, the former is obtained through laboratory work based on the locked rotor test, and the latter through a CAD software based on a 3D model. In order to assess and validate the obtained values, an electromechanical model is derived for validation and contribution of the whole project. Finally, small relative errors between measured and simulated values indicate the functionality of the used methods and of the machine.

AB - One of the fundamental requirements for testing and analysing a Permanent Magnet Synchronous Generator (PMSG) is to obtain its electrical and mechanical parameters. This paper describes the test set up and the procedure for obtaining them. Stator resistance and flux linkage measurements follow IEEE standards. In the other hand a new approach for an alternative stator inductance and inertia measurement is analysed. More precisely, the former is obtained through laboratory work based on the locked rotor test, and the latter through a CAD software based on a 3D model. In order to assess and validate the obtained values, an electromechanical model is derived for validation and contribution of the whole project. Finally, small relative errors between measured and simulated values indicate the functionality of the used methods and of the machine.

KW - Electrical parameters

KW - Mechanical parameters

KW - Permanent magnet synchronous generator

KW - Stator inductance

U2 - 10.1109/OPTIM.2014.6850897

DO - 10.1109/OPTIM.2014.6850897

M3 - Article in proceeding

AN - SCOPUS:84904865682

SN - 9781479951833

T3 - Optimization of Electrical and Electronic Equipment (OPTIM), Proceedings

SP - 483

EP - 488

BT - Proceedings of the International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2014

PB - IEEE Computer Society Press

T2 - International Conference on Optimization of Electrical and Electronic Equipment

Y2 - 22 May 2014 through 24 May 2014

ER -

Kalogiannis T, Malz E, Llano EM, Petersen L, Schimmelmann M, Leban K et al. Alternative parameter determination methods for a PMSG. I Proceedings of the International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2014. IEEE Computer Society Press. 2014. s. 483-488. 6850897. (Optimization of Electrical and Electronic Equipment (OPTIM), Proceedings). doi: 10.1109/OPTIM.2014.6850897

Alternative parameter determination methods for a PMSG

Abstract

Konference

Adgang til dokumentet

AUB Link

Fingeraftryk

Citationsformater