Analytical Design and Performance Validation of Finite Set MPC Regulated Power Converters

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

Abstract

A new approach to performance validation of finite control set model predictive control (FCS-MPC) regulated power electronics converters is presented in the paper - statistical model checking (SMC). SMC is an established method used in various sectors of industry to provide solutions to problems that are beyond the abilities of classical formal techniques. The method is simple for implementation and requires only an operational system model that can be simulated and checked against properties. The approach will be presented on a standard 2-level voltage source converter (VSC) regulated by the FCS-MPC algorithm. In UPPAAL SMC toolbox the converter system and controller are modeled as a Network of Stochastic Timed Automata. To assess the quality of the model, an equivalent Simulink model is used as a benchmark model. Using the model created in UPPAAL SMC toolbox the performance of the FCS-MPC algorithm is verified. The control algorithm is also tested on an experimental setup. During the evaluation, no significant degradation of reference tracking was found during transients nor under model parameter uncertainty.
Luk

Detaljer

A new approach to performance validation of finite control set model predictive control (FCS-MPC) regulated power electronics converters is presented in the paper - statistical model checking (SMC). SMC is an established method used in various sectors of industry to provide solutions to problems that are beyond the abilities of classical formal techniques. The method is simple for implementation and requires only an operational system model that can be simulated and checked against properties. The approach will be presented on a standard 2-level voltage source converter (VSC) regulated by the FCS-MPC algorithm. In UPPAAL SMC toolbox the converter system and controller are modeled as a Network of Stochastic Timed Automata. To assess the quality of the model, an equivalent Simulink model is used as a benchmark model. Using the model created in UPPAAL SMC toolbox the performance of the FCS-MPC algorithm is verified. The control algorithm is also tested on an experimental setup. During the evaluation, no significant degradation of reference tracking was found during transients nor under model parameter uncertainty.
OriginalsprogEngelsk
Artikelnummer8368064
TidsskriftI E E E Transactions on Industrial Electronics
Volume/Bind66
Tidsskriftsnummer3
Sider (fra-til)2004 - 2014
Antal sider11
ISSN0278-0046
DOI
StatusUdgivet - mar. 2019
PublikationsartForskning
Peer reviewJa

Download-statistik

Ingen data tilgængelig
ID: 280252418