CFD modelling of moisture interactions between air and constructions

Lone Hedegaard Mortensen; Monika Woloszyn; Raluca Hohota; Gilles Rusaouën

CFD modelling of moisture interactions between air and constructions

Lone Hedegaard Mortensen, Monika Woloszyn, Raluca Hohota, Gilles Rusaouën

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

2 Citationer (Scopus)

Abstract

There is a strong demand for accurate moisture modelling since moisture poses a risk for both the constructions and the indoor climate. Thus, in this investigation there is special focus on moisture modelling. The paper describes a new model based on a CFD tool that is enhanced to include both detailed modelling of airflows in rooms and heat and moisture transfer in walls by applying them as fluid walls. In a 3D configuration the impact of different boundary conditions are investigated and the results are discussed. The changes of boundary conditions that are studied are velocity, moisture and temperature conditions for room air.

Originalsprog	Engelsk
Titel	Building Simulation 2005 : Ninth International IBPSA Conference
Redaktører	Ian Beausoleil-Morrison, Michel Bernier
Antal sider	1464
Vol/bind	Volume 2
Udgivelsessted	Montreal, Canada
Forlag	École Polytechnique de Montréal and IBPSA -Canada
Publikationsdato	2005
Sider	801-808
ISBN (Trykt)	2-553-01152-0
Status	Udgivet - 2005
Udgivet eksternt	Ja

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

@inproceedings{d2e0739b1edd4f96b4ef3f38b05c4abb,

title = "CFD modelling of moisture interactions between air and constructions",

abstract = "There is a strong demand for accurate moisture modelling since moisture poses a risk for both the constructions and the indoor climate. Thus, in this investigation there is special focus on moisture modelling. The paper describes a new model based on a CFD tool that is enhanced to include both detailed modelling of airflows in rooms and heat and moisture transfer in walls by applying them as fluid walls. In a 3D configuration the impact of different boundary conditions are investigated and the results are discussed. The changes of boundary conditions that are studied are velocity, moisture and temperature conditions for room air.",

author = "Mortensen, {Lone Hedegaard} and Monika Woloszyn and Raluca Hohota and Gilles Rusaou{\"e}n",

year = "2005",

language = "English",

isbn = "2-553-01152-0",

volume = "Volume 2",

pages = "801--808",

editor = "Ian Beausoleil-Morrison and Michel Bernier",

booktitle = "Building Simulation 2005",

publisher = "{\'E}cole Polytechnique de Montr{\'e}al and IBPSA -Canada",

}

CFD modelling of moisture interactions between air and constructions. / Mortensen, Lone Hedegaard; Woloszyn, Monika; Hohota, Raluca et al.
Building Simulation 2005: Ninth International IBPSA Conference. red. / Ian Beausoleil-Morrison; Michel Bernier. Bind Volume 2 Montreal, Canada: École Polytechnique de Montréal and IBPSA -Canada, 2005. s. 801-808.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - CFD modelling of moisture interactions between air and constructions

AU - Mortensen, Lone Hedegaard

AU - Woloszyn, Monika

AU - Hohota, Raluca

AU - Rusaouën, Gilles

PY - 2005

Y1 - 2005

N2 - There is a strong demand for accurate moisture modelling since moisture poses a risk for both the constructions and the indoor climate. Thus, in this investigation there is special focus on moisture modelling. The paper describes a new model based on a CFD tool that is enhanced to include both detailed modelling of airflows in rooms and heat and moisture transfer in walls by applying them as fluid walls. In a 3D configuration the impact of different boundary conditions are investigated and the results are discussed. The changes of boundary conditions that are studied are velocity, moisture and temperature conditions for room air.

AB - There is a strong demand for accurate moisture modelling since moisture poses a risk for both the constructions and the indoor climate. Thus, in this investigation there is special focus on moisture modelling. The paper describes a new model based on a CFD tool that is enhanced to include both detailed modelling of airflows in rooms and heat and moisture transfer in walls by applying them as fluid walls. In a 3D configuration the impact of different boundary conditions are investigated and the results are discussed. The changes of boundary conditions that are studied are velocity, moisture and temperature conditions for room air.

M3 - Article in proceeding

SN - 2-553-01152-0

VL - Volume 2

SP - 801

EP - 808

BT - Building Simulation 2005

A2 - Beausoleil-Morrison, Ian

A2 - Bernier, Michel

PB - École Polytechnique de Montréal and IBPSA -Canada

CY - Montreal, Canada

ER -

CFD modelling of moisture interactions between air and constructions

Abstract

AUB Link

Fingeraftryk

Citationsformater