Initial Sea Trails of the DEXA D05 Wave Energy Converter
Publikation: Forskning › Rapport
Standard
Initial Sea Trails of the DEXA D05 Wave Energy Converter. / Lavelle, John; Kofoed, Jens Peter.
Aalborg : Aalborg University. Department of Civil Engineering, 2012. 41 s. (DCE Contract Reports; Nr. 116).Publikation: Forskning › Rapport
Harvard
APA
CBE
MLA
Vancouver
Author
Bibtex
}
RIS
TY - RPRT
T1 - Initial Sea Trails of the DEXA D05 Wave Energy Converter
A1 - Lavelle,John
A1 - Kofoed,Jens Peter
AU - Lavelle,John
AU - Kofoed,Jens Peter
PB - Aalborg University. Department of Civil Engineering
PY - 2012
Y1 - 2012
N2 - This report presents an analysis of sensors data leading to an initial assessment of the power performance from sea trails of the DEXA D05 Wave Energy Converter (WEC). The sea trails where performed approx. 1 nautical mile offshore from Hanstholm, Denmark during 2011. The converter was 1:5 scale model of the planned full scale DEXA WEC with a hydraulic Power Take Off (PTO). The converter had sensors to measure mooring forces, motions, as well as pressure and displacement sensors in the PTOs. The report gives the calculated power production efficiency and an analysis of the mooring forces. The DEXA D05 WEC was built, deployed and operated by the client DEXAWAVE ApS and the analysis of the sensor data, given here, has been carried out by John Lavelle under supervision by Jens Peter Kofoed in the Wave Energy Research Group at the department of Civil Engineering, Aalborg University (AAU).
AB - This report presents an analysis of sensors data leading to an initial assessment of the power performance from sea trails of the DEXA D05 Wave Energy Converter (WEC). The sea trails where performed approx. 1 nautical mile offshore from Hanstholm, Denmark during 2011. The converter was 1:5 scale model of the planned full scale DEXA WEC with a hydraulic Power Take Off (PTO). The converter had sensors to measure mooring forces, motions, as well as pressure and displacement sensors in the PTOs. The report gives the calculated power production efficiency and an analysis of the mooring forces. The DEXA D05 WEC was built, deployed and operated by the client DEXAWAVE ApS and the analysis of the sensor data, given here, has been carried out by John Lavelle under supervision by Jens Peter Kofoed in the Wave Energy Research Group at the department of Civil Engineering, Aalborg University (AAU).
KW - WAB
KW - PTO
KW - WEC
KW - Wave Energy Converter
KW - Power Production Estimation
KW - Test Setup
KW - Wave Activated Body
KW - Test Setup
KW - WEC
KW - PTO
KW - WAB
KW - Wave Activated Body
KW - Wave Energy Converter
KW - Power Production Estimation
BT - Initial Sea Trails of the DEXA D05 Wave Energy Converter
T3 - DCE Contract Reports
T3 - en_GB
ER -