Multistage switched inductor boost converter for renewable energy application

Pandav Kiran Maroti; Sanjeevikumar Padmanaban; Mahajan Sagar Bhaskar; Frede Blaabjerg; Vigna K. Ramachandaramurthy; Pierluigi Siano; Viliam Fedák

doi:10.1109/CENCON.2017.8262504

Multistage switched inductor boost converter for renewable energy application

Pandav Kiran Maroti, Sanjeevikumar Padmanaban, Mahajan Sagar Bhaskar , Frede Blaabjerg, Vigna K. Ramachandaramurthy, Pierluigi Siano, Viliam Fedák

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

24 Citationer (Scopus)

Abstract

In this paper Multistage Switched Inductor Boost Converter (Multistage SIBC) is uttered for renewable energy applications. The projected converter is derived from an amalgamation of the conventional step-up converter and inductor stack. The number of inductor and duty ratio decides the overall voltage gain of the projected converter. The projected converter consists of only one controlled power semiconductor device. The 50 KHz frequency is adopted to reduce the L, C value and to suppress the output waveform ripples. The analysis and working of projected converter is discussed in detail. Simulation of the projected converter for three stages is done in Matlab/Simulink (version-2016) and the results are verified with theoretical values.

Originalsprog	Engelsk
Titel	Proceedings of 2017 IEEE Conference on Energy Conversion (CENCON)
Antal sider	6
Forlag	IEEE Press
Publikationsdato	okt. 2017
Sider	311-316
ISBN (Elektronisk)	978-1-5386-3935-1
DOI	https://doi.org/10.1109/CENCON.2017.8262504
Status	Udgivet - okt. 2017
Begivenhed	2017 IEEE Conference on Energy Conversion (CENCON) - Kuala Lumpur, Malaysia Varighed: 30 okt. 2017 → 31 okt. 2017

Konference

Konference	2017 IEEE Conference on Energy Conversion (CENCON)
Land/Område	Malaysia
By	Kuala Lumpur
Periode	30/10/2017 → 31/10/2017

Adgang til dokumentet

10.1109/CENCON.2017.8262504

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

@inproceedings{c5a1d28084c94d6cb46f2a5778f49733,

title = "Multistage switched inductor boost converter for renewable energy application",

abstract = "In this paper Multistage Switched Inductor Boost Converter (Multistage SIBC) is uttered for renewable energy applications. The projected converter is derived from an amalgamation of the conventional step-up converter and inductor stack. The number of inductor and duty ratio decides the overall voltage gain of the projected converter. The projected converter consists of only one controlled power semiconductor device. The 50 KHz frequency is adopted to reduce the L, C value and to suppress the output waveform ripples. The analysis and working of projected converter is discussed in detail. Simulation of the projected converter for three stages is done in Matlab/Simulink (version-2016) and the results are verified with theoretical values.",

keywords = "Multistage Converter, Switched Inductor, Boost Converter, Renewable Energy, High Voltage Gain",

author = "Maroti, {Pandav Kiran} and Sanjeevikumar Padmanaban and Bhaskar, {Mahajan Sagar} and Frede Blaabjerg and Ramachandaramurthy, {Vigna K.} and Pierluigi Siano and Viliam Fed{\'a}k",

year = "2017",

month = oct,

doi = "10.1109/CENCON.2017.8262504",

language = "English",

pages = "311--316",

booktitle = "Proceedings of 2017 IEEE Conference on Energy Conversion (CENCON)",

publisher = "IEEE Press",

note = "2017 IEEE Conference on Energy Conversion (CENCON) ; Conference date: 30-10-2017 Through 31-10-2017",

}

Maroti, PK, Padmanaban, S, Bhaskar , MS, Blaabjerg, F, Ramachandaramurthy, VK, Siano, P & Fedák, V 2017, Multistage switched inductor boost converter for renewable energy application. i Proceedings of 2017 IEEE Conference on Energy Conversion (CENCON). IEEE Press, s. 311-316, 2017 IEEE Conference on Energy Conversion (CENCON), Kuala Lumpur, Malaysia, 30/10/2017. https://doi.org/10.1109/CENCON.2017.8262504

Multistage switched inductor boost converter for renewable energy application. / Maroti, Pandav Kiran; Padmanaban, Sanjeevikumar; Bhaskar , Mahajan Sagar et al.
Proceedings of 2017 IEEE Conference on Energy Conversion (CENCON). IEEE Press, 2017. s. 311-316.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Multistage switched inductor boost converter for renewable energy application

AU - Maroti, Pandav Kiran

AU - Padmanaban, Sanjeevikumar

AU - Bhaskar , Mahajan Sagar

AU - Blaabjerg, Frede

AU - Ramachandaramurthy, Vigna K.

AU - Siano, Pierluigi

AU - Fedák, Viliam

PY - 2017/10

Y1 - 2017/10

N2 - In this paper Multistage Switched Inductor Boost Converter (Multistage SIBC) is uttered for renewable energy applications. The projected converter is derived from an amalgamation of the conventional step-up converter and inductor stack. The number of inductor and duty ratio decides the overall voltage gain of the projected converter. The projected converter consists of only one controlled power semiconductor device. The 50 KHz frequency is adopted to reduce the L, C value and to suppress the output waveform ripples. The analysis and working of projected converter is discussed in detail. Simulation of the projected converter for three stages is done in Matlab/Simulink (version-2016) and the results are verified with theoretical values.

AB - In this paper Multistage Switched Inductor Boost Converter (Multistage SIBC) is uttered for renewable energy applications. The projected converter is derived from an amalgamation of the conventional step-up converter and inductor stack. The number of inductor and duty ratio decides the overall voltage gain of the projected converter. The projected converter consists of only one controlled power semiconductor device. The 50 KHz frequency is adopted to reduce the L, C value and to suppress the output waveform ripples. The analysis and working of projected converter is discussed in detail. Simulation of the projected converter for three stages is done in Matlab/Simulink (version-2016) and the results are verified with theoretical values.

KW - Multistage Converter

KW - Switched Inductor

KW - Boost Converter

KW - Renewable Energy

KW - High Voltage Gain

U2 - 10.1109/CENCON.2017.8262504

DO - 10.1109/CENCON.2017.8262504

M3 - Article in proceeding

SP - 311

EP - 316

BT - Proceedings of 2017 IEEE Conference on Energy Conversion (CENCON)

PB - IEEE Press

T2 - 2017 IEEE Conference on Energy Conversion (CENCON)

Y2 - 30 October 2017 through 31 October 2017

ER -

Multistage switched inductor boost converter for renewable energy application

Abstract

Konference

Adgang til dokumentet

AUB Link

Fingeraftryk

Citationsformater