The cycloid Permanent Magnetic Gear

Peter Omand Rasmussen; Torben Ole Andersen; Frank T. Jørgensen

doi:10.1109/TIA.2008.2006295

The cycloid Permanent Magnetic Gear

Peter Omand Rasmussen, Torben Ole Andersen, Frank T. Jørgensen

Publikation: Bidrag til tidsskrift › Tidsskriftartikel › Forskning › peer review

125 Citationer (Scopus)

3035 Downloads (Pure)

Abstract

This paper presents a new permanent-magnet gear based on the cycloid gearing principle. which normally is characterized by an extreme torque density and a very high gearing ratio. An initial design of the proposed magnetic gear was designed, analyzed, and optimized with an analytical model regarding torque density. The results were promising as compared to other high-performance magnetic-gear designs. A test model was constructed to verify the analytical model.
Udgivelsesdato: November/December

Originalsprog	Engelsk
Tidsskrift	IEEE Transactions on Industry Applications
Vol/bind	44
Udgave nummer	6
Sider (fra-til)	1659-1665
Antal sider	6
ISSN	0093-9994
DOI	https://doi.org/10.1109/TIA.2008.2006295
Status	Udgivet - 2008

Emneord

Analytical modeling
Finite element analysis (FEA)
Magnetic gear
Permanent magnets

Adgang til dokumentet

10.1109/TIA.2008.2006295

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

@article{20b83180c75611dda016000ea68e967b,

title = "The cycloid Permanent Magnetic Gear",

abstract = "This paper presents a new permanent-magnet gear based on the cycloid gearing principle. which normally is characterized by an extreme torque density and a very high gearing ratio. An initial design of the proposed magnetic gear was designed, analyzed, and optimized with an analytical model regarding torque density. The results were promising as compared to other high-performance magnetic-gear designs. A test model was constructed to verify the analytical model.",

keywords = "Analytical modeling, Finite element analysis (FEA), Magnetic gear, Permanent magnets, Analytical modeling, Finite element analysis (FEA), Magnetic gear, Permanent magnets",

author = "Rasmussen, {Peter Omand} and Andersen, {Torben Ole} and J{\o}rgensen, {Frank T.}",

year = "2008",

doi = "10.1109/TIA.2008.2006295",

language = "English",

volume = "44",

pages = "1659--1665",

journal = "IEEE Transactions on Industry Applications",

issn = "0093-9994",

publisher = "IEEE",

number = "6",

}

TY - JOUR

T1 - The cycloid Permanent Magnetic Gear

AU - Rasmussen, Peter Omand

AU - Andersen, Torben Ole

AU - Jørgensen, Frank T.

PY - 2008

Y1 - 2008

N2 - This paper presents a new permanent-magnet gear based on the cycloid gearing principle. which normally is characterized by an extreme torque density and a very high gearing ratio. An initial design of the proposed magnetic gear was designed, analyzed, and optimized with an analytical model regarding torque density. The results were promising as compared to other high-performance magnetic-gear designs. A test model was constructed to verify the analytical model.

AB - This paper presents a new permanent-magnet gear based on the cycloid gearing principle. which normally is characterized by an extreme torque density and a very high gearing ratio. An initial design of the proposed magnetic gear was designed, analyzed, and optimized with an analytical model regarding torque density. The results were promising as compared to other high-performance magnetic-gear designs. A test model was constructed to verify the analytical model.

KW - Analytical modeling

KW - Finite element analysis (FEA)

KW - Magnetic gear

KW - Permanent magnets

KW - Analytical modeling

KW - Finite element analysis (FEA)

KW - Magnetic gear

KW - Permanent magnets

U2 - 10.1109/TIA.2008.2006295

DO - 10.1109/TIA.2008.2006295

M3 - Journal article

SN - 0093-9994

VL - 44

SP - 1659

EP - 1665

JO - IEEE Transactions on Industry Applications

JF - IEEE Transactions on Industry Applications

IS - 6

ER -

The cycloid Permanent Magnetic Gear

Abstract

Emneord

Adgang til dokumentet

AUB Link

Fingeraftryk

Citationsformater