Thermal performance of a composite mould tool with two integrated heating/cooling zones

Johnny Jakobsen; Jens H. Andreasen; Ole Thybo Thomsen

Thermal performance of a composite mould tool with two integrated heating/cooling zones

Johnny Jakobsen, Jens H. Andreasen, Ole Thybo Thomsen

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

Abstract

The paper considers the curing process of a thermosetting unidirectional glass/epoxy composite material system. The curing is designed as a two-stage cycle, where the two-stage curing refers to the curing of one area of the laminate prior to the other. The purpose of this is to develop cure induced residual stresses in the laminate aiming for a future examination of their effect on the mechanical properties. The aim of this paper is to confirm that the developed mould tool has the ability to achieve a well-defined two-stage curing cycle. Furthermore, the predictions of a numerical model of the curing process against measured Tg values for the considered glass/epoxy system is validated.

Originalsprog	Engelsk
Titel	Proceedings ECCM15 – 15th European Conference On Composite Materials, Venice, Italy, 24-28 June, 2012
Antal sider	5
Publikationsdato	2012
ISBN (Trykt)	978-88-88785-33-2
Status	Udgivet - 2012
Begivenhed	ECCM15 - 15Th European Conference On Composite Materials, Venice, Italy, 24-28 June 2012 - Venice, Italien Varighed: 24 jun. 2012 → 28 jun. 2012

Konference

Konference	ECCM15 - 15Th European Conference On Composite Materials, Venice, Italy, 24-28 June 2012
Land/Område	Italien
By	Venice
Periode	24/06/2012 → 28/06/2012

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

@inproceedings{d7e2cb158a4f4c69a874a8b074c59de6,

title = "Thermal performance of a composite mould tool with two integrated heating/cooling zones",

abstract = "The paper considers the curing process of a thermosetting unidirectional glass/epoxy composite material system. The curing is designed as a two-stage cycle, where the two-stage curing refers to the curing of one area of the laminate prior to the other. The purpose of this is to develop cure induced residual stresses in the laminate aiming for a future examination of their effect on the mechanical properties. The aim of this paper is to confirm that the developed mould tool has the ability to achieve a well-defined two-stage curing cycle. Furthermore, the predictions of a numerical model of the curing process against measured Tg values for the considered glass/epoxy system is validated.",

author = "Johnny Jakobsen and Andreasen, {Jens H.} and Thomsen, {Ole Thybo}",

year = "2012",

language = "English",

isbn = "978-88-88785-33-2",

booktitle = "Proceedings ECCM15 – 15th European Conference On Composite Materials, Venice, Italy, 24-28 June, 2012",

note = "ECCM15 - 15Th European Conference On Composite Materials, Venice, Italy, 24-28 June 2012 ; Conference date: 24-06-2012 Through 28-06-2012",

}

Thermal performance of a composite mould tool with two integrated heating/cooling zones. / Jakobsen, Johnny ; Andreasen, Jens H.; Thomsen, Ole Thybo.
Proceedings ECCM15 – 15th European Conference On Composite Materials, Venice, Italy, 24-28 June, 2012. 2012.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Thermal performance of a composite mould tool with two integrated heating/cooling zones

AU - Jakobsen, Johnny

AU - Andreasen, Jens H.

AU - Thomsen, Ole Thybo

PY - 2012

Y1 - 2012

N2 - The paper considers the curing process of a thermosetting unidirectional glass/epoxy composite material system. The curing is designed as a two-stage cycle, where the two-stage curing refers to the curing of one area of the laminate prior to the other. The purpose of this is to develop cure induced residual stresses in the laminate aiming for a future examination of their effect on the mechanical properties. The aim of this paper is to confirm that the developed mould tool has the ability to achieve a well-defined two-stage curing cycle. Furthermore, the predictions of a numerical model of the curing process against measured Tg values for the considered glass/epoxy system is validated.

AB - The paper considers the curing process of a thermosetting unidirectional glass/epoxy composite material system. The curing is designed as a two-stage cycle, where the two-stage curing refers to the curing of one area of the laminate prior to the other. The purpose of this is to develop cure induced residual stresses in the laminate aiming for a future examination of their effect on the mechanical properties. The aim of this paper is to confirm that the developed mould tool has the ability to achieve a well-defined two-stage curing cycle. Furthermore, the predictions of a numerical model of the curing process against measured Tg values for the considered glass/epoxy system is validated.

M3 - Article in proceeding

SN - 978-88-88785-33-2

BT - Proceedings ECCM15 – 15th European Conference On Composite Materials, Venice, Italy, 24-28 June, 2012

T2 - ECCM15 - 15Th European Conference On Composite Materials, Venice, Italy, 24-28 June 2012

Y2 - 24 June 2012 through 28 June 2012

ER -