Vector Fitting-Based Reduced Order Modeling Method for Power Cables

Weihua Zhou; Yanbo Wang; Zhe Chen

doi:10.1049/cp.2019.0050

Vector Fitting-Based Reduced Order Modeling Method for Power Cables

^*Kontaktforfatter

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

146 Downloads (Pure)

Abstract

To study the frequency and damping characteristics of power cable, high-order RLC circuit models are commonly required, which involves high computational burdens for modelling and analysis. In this paper, a reduced-order modelling method for power cable is proposed on the basis of Prony analysis (PA), vector fitting (VF) algorithm and balanced truncation (BT) algorithm. The state space model of power cable is first obtained by fitting terminal frequency responses using PA and VF instead of directly building mathematical model; Then the low-frequency characteristics is maintained using BT algorithm. The fitting accuracy can be improved by increasing the order. The proposed method is able to reduce computational burdens for power cable modelling, which thus improves modelling and analysis efficiency. Simulation results are given to validate the effectiveness of the proposed modelling method.

Originalsprog	Engelsk
Titel	Proceedings of 15th IET International Conference on AC and DC Power Transmission (ACDC 2019)
Antal sider	6
Forlag	Institution of Engineering and Technology
Publikationsdato	feb. 2019
ISBN (Elektronisk)	978-1-83953-007-4
DOI	https://doi.org/10.1049/cp.2019.0050
Status	Udgivet - feb. 2019
Begivenhed	15th IET International Conference on AC and DC Power Transmission (ACDC 2019) - Coventry, Storbritannien Varighed: 5 feb. 2019 → 7 feb. 2019

Konference

Konference	15th IET International Conference on AC and DC Power Transmission (ACDC 2019)
Land/Område	Storbritannien
By	Coventry
Periode	05/02/2019 → 07/02/2019

Adgang til dokumentet

10.1049/cp.2019.0050

Accepted author manuscriptAccepteret manuskript, 1,55 MBLicens: CC BY 4.0

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

COPE: Voltage Control and Protection for a Grid towards 100 Power Electronics and Cable Network
Chen, Z., Fang, J., Su, C. & Miltersen, A. H.
ForskEL, EUDP
01/10/2017 → 03/12/2020
Projekter: Projekt › Forskning

Citationsformater

@inproceedings{862c3583ad86458189e1617966e2def0,

title = "Vector Fitting-Based Reduced Order Modeling Method for Power Cables",

abstract = "To study the frequency and damping characteristics of power cable, high-order RLC circuit models are commonly required, which involves high computational burdens for modelling and analysis. In this paper, a reduced-order modelling method for power cable is proposed on the basis of Prony analysis (PA), vector fitting (VF) algorithm and balanced truncation (BT) algorithm. The state space model of power cable is first obtained by fitting terminal frequency responses using PA and VF instead of directly building mathematical model; Then the low-frequency characteristics is maintained using BT algorithm. The fitting accuracy can be improved by increasing the order. The proposed method is able to reduce computational burdens for power cable modelling, which thus improves modelling and analysis efficiency. Simulation results are given to validate the effectiveness of the proposed modelling method.",

keywords = "Long transmission cable, Reduced-order modelling, Vector fitting",

author = "Weihua Zhou and Yanbo Wang and Zhe Chen",

year = "2019",

month = feb,

doi = "10.1049/cp.2019.0050",

language = "English",

booktitle = "Proceedings of 15th IET International Conference on AC and DC Power Transmission (ACDC 2019)",

publisher = "Institution of Engineering and Technology",

address = "United States",

note = "15th IET International Conference on AC and DC Power Transmission (ACDC 2019) ; Conference date: 05-02-2019 Through 07-02-2019",

}

Zhou, W, Wang, Y & Chen, Z 2019, Vector Fitting-Based Reduced Order Modeling Method for Power Cables. i Proceedings of 15th IET International Conference on AC and DC Power Transmission (ACDC 2019). Institution of Engineering and Technology, 15th IET International Conference on AC and DC Power Transmission (ACDC 2019), Coventry, Storbritannien, 05/02/2019. https://doi.org/10.1049/cp.2019.0050

Vector Fitting-Based Reduced Order Modeling Method for Power Cables. / Zhou, Weihua; Wang, Yanbo ; Chen, Zhe.
Proceedings of 15th IET International Conference on AC and DC Power Transmission (ACDC 2019). Institution of Engineering and Technology, 2019.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Vector Fitting-Based Reduced Order Modeling Method for Power Cables

AU - Zhou, Weihua

AU - Wang, Yanbo

AU - Chen, Zhe

PY - 2019/2

Y1 - 2019/2

N2 - To study the frequency and damping characteristics of power cable, high-order RLC circuit models are commonly required, which involves high computational burdens for modelling and analysis. In this paper, a reduced-order modelling method for power cable is proposed on the basis of Prony analysis (PA), vector fitting (VF) algorithm and balanced truncation (BT) algorithm. The state space model of power cable is first obtained by fitting terminal frequency responses using PA and VF instead of directly building mathematical model; Then the low-frequency characteristics is maintained using BT algorithm. The fitting accuracy can be improved by increasing the order. The proposed method is able to reduce computational burdens for power cable modelling, which thus improves modelling and analysis efficiency. Simulation results are given to validate the effectiveness of the proposed modelling method.

AB - To study the frequency and damping characteristics of power cable, high-order RLC circuit models are commonly required, which involves high computational burdens for modelling and analysis. In this paper, a reduced-order modelling method for power cable is proposed on the basis of Prony analysis (PA), vector fitting (VF) algorithm and balanced truncation (BT) algorithm. The state space model of power cable is first obtained by fitting terminal frequency responses using PA and VF instead of directly building mathematical model; Then the low-frequency characteristics is maintained using BT algorithm. The fitting accuracy can be improved by increasing the order. The proposed method is able to reduce computational burdens for power cable modelling, which thus improves modelling and analysis efficiency. Simulation results are given to validate the effectiveness of the proposed modelling method.

KW - Long transmission cable

KW - Reduced-order modelling

KW - Vector fitting

U2 - 10.1049/cp.2019.0050

DO - 10.1049/cp.2019.0050

M3 - Article in proceeding

BT - Proceedings of 15th IET International Conference on AC and DC Power Transmission (ACDC 2019)

PB - Institution of Engineering and Technology

T2 - 15th IET International Conference on AC and DC Power Transmission (ACDC 2019)

Y2 - 5 February 2019 through 7 February 2019

ER -

Vector Fitting-Based Reduced Order Modeling Method for Power Cables

Abstract

Konference

Adgang til dokumentet

AUB Link

Fingeraftryk

Projekter

COPE: Voltage Control and Protection for a Grid towards 100 Power Electronics and Cable Network

Citationsformater