A Conceptual Digital Assistance System Supporting Manual Changeovers in High-Variety Production

Rasmus Andersen; Christopher Ketelsen; Kjeld Nielsen; Ann-Louise Andersen; Thomas D. Brunoe; Sofie Bech

doi:10.1007/978-3-319-99707-0_56

A Conceptual Digital Assistance System Supporting Manual Changeovers in High-Variety Production

Rasmus Andersen, Christopher Ketelsen, Kjeld Nielsen, Ann-Louise Andersen, Thomas D. Brunoe, Sofie Bech

Research output: Contribution to book/anthology/report/conference proceeding › Article in proceeding › Research › peer-review

6 Citations (Scopus)

Abstract

The advent of production strategies such as Mass Customization and Changeable Manufacturing requires that production systems be increasingly flexible towards diverse customer needs. Although humans remain the most flexible entity in modern production systems, the increasing complexity of these systems presents a challenge for the operators with regards to remaining efficient. Research related to Industry 4.0 has promoted the application of digital assistance systems, as a method of augmenting human operators to handle the complexity of these production systems better. However, no digital assistance system that supports human operators in performing manual changeover operations in complex production systems has been identified. This paper, therefore, presents a conceptual digital assistance system, which utilizes information about two consecutive production configurations, and processes this data through an algorithm, to determine which specific changeover operations are required to perform a changeover most efficiently. Potentials of implementing the proposed digital assistance system are briefly introduced, and topics for further research are outlined.

Original language	English
Title of host publication	Advances in Production Management Systems. Smart Manufacturing for Industry 4.0 - IFIP WG 5.7 International Conference, APMS 2018, Proceedings : IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part II
Editors	Gregor von Cieminski, Gyu M. Lee, Dimitris Kiritsis, Ilkyeong Moon, Jinwoo Park
Number of pages	7
Volume	536
Publisher	Springer
Publication date	25 Aug 2018
Pages	449-455
ISBN (Print)	978-3-319-99706-3
ISBN (Electronic)	978-3-319-99707-0
DOIs	https://doi.org/10.1007/978-3-319-99707-0_56
Publication status	Published - 25 Aug 2018
Event	IFIP International Conference on Advances in Production Management Systems: Production Management for Data-Driven, Intelligent, Collaborative, and Sustainable Manufacturing - Seoul, Korea, Republic of Duration: 26 Aug 2018 → 30 Aug 2018

Conference

Conference	IFIP International Conference on Advances in Production Management Systems
Country/Territory	Korea, Republic of
City	Seoul
Period	26/08/2018 → 30/08/2018

Series	I F I P
ISSN	1571-5736

Keywords

Changeability
Changeable manufacturing
Changeover ability
Digital assistance system
Mass customization

Access to Document

10.1007/978-3-319-99707-0_56

AUB Link

Search for the material in Aalborg University Library's search engine

Cite this

Andersen, R., Ketelsen, C., Nielsen, K., Andersen, A-L., Brunoe, T. D., & Bech, S. (2018). A Conceptual Digital Assistance System Supporting Manual Changeovers in High-Variety Production. In G. von Cieminski, G. M. Lee, D. Kiritsis, I. Moon, & J. Park (Eds.), Advances in Production Management Systems. Smart Manufacturing for Industry 4.0 - IFIP WG 5.7 International Conference, APMS 2018, Proceedings: IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part II (Vol. 536, pp. 449-455). Springer. https://doi.org/10.1007/978-3-319-99707-0_56

Andersen, Rasmus ; Ketelsen, Christopher ; Nielsen, Kjeld et al. / A Conceptual Digital Assistance System Supporting Manual Changeovers in High-Variety Production. Advances in Production Management Systems. Smart Manufacturing for Industry 4.0 - IFIP WG 5.7 International Conference, APMS 2018, Proceedings: IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part II. editor / Gregor von Cieminski ; Gyu M. Lee ; Dimitris Kiritsis ; Ilkyeong Moon ; Jinwoo Park. Vol. 536 Springer, 2018. pp. 449-455 (I F I P).

@inproceedings{61b8b0cc245a4041a887adb68c1d4e93,

title = "A Conceptual Digital Assistance System Supporting Manual Changeovers in High-Variety Production",

abstract = "The advent of production strategies such as Mass Customization and Changeable Manufacturing requires that production systems be increasingly flexible towards diverse customer needs. Although humans remain the most flexible entity in modern production systems, the increasing complexity of these systems presents a challenge for the operators with regards to remaining efficient. Research related to Industry 4.0 has promoted the application of digital assistance systems, as a method of augmenting human operators to handle the complexity of these production systems better. However, no digital assistance system that supports human operators in performing manual changeover operations in complex production systems has been identified. This paper, therefore, presents a conceptual digital assistance system, which utilizes information about two consecutive production configurations, and processes this data through an algorithm, to determine which specific changeover operations are required to perform a changeover most efficiently. Potentials of implementing the proposed digital assistance system are briefly introduced, and topics for further research are outlined.",

keywords = "Changeability, Changeable manufacturing, Changeover ability, Digital assistance system, Mass customization",

author = "Rasmus Andersen and Christopher Ketelsen and Kjeld Nielsen and Ann-Louise Andersen and Brunoe, {Thomas D.} and Sofie Bech",

year = "2018",

month = aug,

day = "25",

doi = "10.1007/978-3-319-99707-0_56",

language = "English",

isbn = "978-3-319-99706-3",

volume = "536",

series = "I F I P",

publisher = "Springer",

pages = "449--455",

editor = "{von Cieminski}, Gregor and Lee, {Gyu M.} and Dimitris Kiritsis and Ilkyeong Moon and Jinwoo Park",

booktitle = "Advances in Production Management Systems. Smart Manufacturing for Industry 4.0 - IFIP WG 5.7 International Conference, APMS 2018, Proceedings",

address = "Germany",

note = "IFIP International Conference on Advances in Production Management Systems ; Conference date: 26-08-2018 Through 30-08-2018",

}

Andersen, R, Ketelsen, C, Nielsen, K , Andersen, A-L , Brunoe, TD & Bech, S 2018, A Conceptual Digital Assistance System Supporting Manual Changeovers in High-Variety Production. in G von Cieminski, GM Lee, D Kiritsis, I Moon & J Park (eds), Advances in Production Management Systems. Smart Manufacturing for Industry 4.0 - IFIP WG 5.7 International Conference, APMS 2018, Proceedings: IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part II. vol. 536, Springer, I F I P, pp. 449-455, IFIP International Conference on Advances in Production Management Systems, Seoul, Korea, Republic of, 26/08/2018. https://doi.org/10.1007/978-3-319-99707-0_56

A Conceptual Digital Assistance System Supporting Manual Changeovers in High-Variety Production. / Andersen, Rasmus; Ketelsen, Christopher; Nielsen, Kjeld et al.
Advances in Production Management Systems. Smart Manufacturing for Industry 4.0 - IFIP WG 5.7 International Conference, APMS 2018, Proceedings: IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part II. ed. / Gregor von Cieminski; Gyu M. Lee; Dimitris Kiritsis; Ilkyeong Moon; Jinwoo Park. Vol. 536 Springer, 2018. p. 449-455 (I F I P).

Research output: Contribution to book/anthology/report/conference proceeding › Article in proceeding › Research › peer-review

TY - GEN

T1 - A Conceptual Digital Assistance System Supporting Manual Changeovers in High-Variety Production

AU - Andersen, Rasmus

AU - Ketelsen, Christopher

AU - Nielsen, Kjeld

AU - Andersen, Ann-Louise

AU - Brunoe, Thomas D.

AU - Bech, Sofie

PY - 2018/8/25

Y1 - 2018/8/25

N2 - The advent of production strategies such as Mass Customization and Changeable Manufacturing requires that production systems be increasingly flexible towards diverse customer needs. Although humans remain the most flexible entity in modern production systems, the increasing complexity of these systems presents a challenge for the operators with regards to remaining efficient. Research related to Industry 4.0 has promoted the application of digital assistance systems, as a method of augmenting human operators to handle the complexity of these production systems better. However, no digital assistance system that supports human operators in performing manual changeover operations in complex production systems has been identified. This paper, therefore, presents a conceptual digital assistance system, which utilizes information about two consecutive production configurations, and processes this data through an algorithm, to determine which specific changeover operations are required to perform a changeover most efficiently. Potentials of implementing the proposed digital assistance system are briefly introduced, and topics for further research are outlined.

AB - The advent of production strategies such as Mass Customization and Changeable Manufacturing requires that production systems be increasingly flexible towards diverse customer needs. Although humans remain the most flexible entity in modern production systems, the increasing complexity of these systems presents a challenge for the operators with regards to remaining efficient. Research related to Industry 4.0 has promoted the application of digital assistance systems, as a method of augmenting human operators to handle the complexity of these production systems better. However, no digital assistance system that supports human operators in performing manual changeover operations in complex production systems has been identified. This paper, therefore, presents a conceptual digital assistance system, which utilizes information about two consecutive production configurations, and processes this data through an algorithm, to determine which specific changeover operations are required to perform a changeover most efficiently. Potentials of implementing the proposed digital assistance system are briefly introduced, and topics for further research are outlined.

KW - Changeability

KW - Changeable manufacturing

KW - Changeover ability

KW - Digital assistance system

KW - Mass customization

UR - http://www.scopus.com/inward/record.url?scp=85053282990&partnerID=8YFLogxK

U2 - 10.1007/978-3-319-99707-0_56

DO - 10.1007/978-3-319-99707-0_56

M3 - Article in proceeding

SN - 978-3-319-99706-3

VL - 536

T3 - I F I P

SP - 449

EP - 455

BT - Advances in Production Management Systems. Smart Manufacturing for Industry 4.0 - IFIP WG 5.7 International Conference, APMS 2018, Proceedings

A2 - von Cieminski, Gregor

A2 - Lee, Gyu M.

A2 - Kiritsis, Dimitris

A2 - Moon, Ilkyeong

A2 - Park, Jinwoo

PB - Springer

T2 - IFIP International Conference on Advances in Production Management Systems

Y2 - 26 August 2018 through 30 August 2018

ER -

Andersen R, Ketelsen C, Nielsen K , Andersen A-L , Brunoe TD, Bech S. A Conceptual Digital Assistance System Supporting Manual Changeovers in High-Variety Production. In von Cieminski G, Lee GM, Kiritsis D, Moon I, Park J, editors, Advances in Production Management Systems. Smart Manufacturing for Industry 4.0 - IFIP WG 5.7 International Conference, APMS 2018, Proceedings: IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part II. Vol. 536. Springer. 2018. p. 449-455. (I F I P). doi: 10.1007/978-3-319-99707-0_56

A Conceptual Digital Assistance System Supporting Manual Changeovers in High-Variety Production

Abstract

Conference

Keywords

Access to Document

AUB Link

Other files and links

Activities

IFIP WG 5.7 International Conference, APMS 2018

Cite this