1st DeepWind 5 MW Baseline design

Uwe S. Paulsen, Luca Vita, Helge A. Madsen, Jesper Hattel, Ewen Ritchie, Krisztina Monika Leban, Petter A. Berthelsen, Stefan Carstensen

Publikation: Bidrag til tidsskriftKonferenceartikel i tidsskriftForskningpeer review

41 Citationer (Scopus)

Abstrakt

The first 5MW baseline design of the DeepWind concept is presented for a Darrieus type floating wind turbine system for water depths of more than 150 m. This design will be used as design reference to test the next technological improvements of sub-component level, being based as much as possible on existing technology.The iterative design process involves all sub-components and the potential constraints, and the most important dependencies are highlighted and the selected design presented. The blades are designed with constraints to minimize the gravitational loads and to be produced in a controlled pultrusion process. The floating platform is a slender cylindrical structure (i.e. spar buoy) rotating along with the rotor. The stability of the platform is achieved by adding counter weight at the bottom of the structure. During operations, the rotor is tilted and acts as a gyro, describing an elliptical trajectory on the water plane. The generator is placed at the bottom of the platform and uses 5MW direct drive technology.The conceptual design is evaluated with numerical simulations in the time domain using the aero-elastic code HAWC2. In order to investigate the concept, a double-disc blade element momentum (BEM) code for VAWTs has been included in the numerical solver through a dll.The analysis of the design is carried out in two different steps:1) to estimate natural frequencies of the platform in order to avoid major resonance problems, 2)to evaluate the baseline concept for certain load cases. A site has been chosen for the floating turbine off Norway as representative for external conditions. The structure is verified according to an ultimate strength analysis, including loads from wind, waves and currents. The stability of the platform is investigated, considering the displacements of the spar buoy and the maximum inclination angle, which is kept lower than 15 degrees.
OriginalsprogEngelsk
TidsskriftEnergy Procedia
Vol/bind24
Sider (fra-til)27-35
ISSN1876-6102
DOI
StatusUdgivet - 2012
Begivenhed9th Deep Sea Offshore Wind R&D Seminar - Trondheim, Norge
Varighed: 19 jan. 201220 jan. 2012
Konferencens nummer: 9

Konference

Konference9th Deep Sea Offshore Wind R&D Seminar
Nummer9
LandNorge
ByTrondheim
Periode19/01/201220/01/2012

    Fingerprint

Citationsformater

Paulsen, U. S., Vita, L., Madsen, H. A., Hattel, J., Ritchie, E., Leban, K. M., Berthelsen, P. A., & Carstensen, S. (2012). 1st DeepWind 5 MW Baseline design. Energy Procedia, 24, 27-35. https://doi.org/10.1016/j.egypro.2012.06.083