Improving species and size selectivity in the Baltic cod trawl fishery with two simple codend designs

The eastern Baltic cod (Gadus morhua) stock is at a critically low level and recruitment of the western Baltic cod stock is at the lowest observed level in over 30 years. The EU (European Union) landing obligation was introduced in 2015 for cod and in 2017 for plaice (Pleuronectes platessa). Size selective codend designs have been used in the Baltic cod trawl fishery for 25 years; however, there are still relatively high discard rates for cod, plaice and European flounder (Platichthys flesus; henceforth flounder) in the trawl fishery and landings of individuals below the minimum conservation reference size (MCRS). These problems call for additional improvements of species and size selectivity in the cod trawl fishery. In this study, two trawl codend designs were developed and tested to improve species and size selectivity in the Baltic cod trawl fishery. The codends were tested onboard a commercial trawler and the test codends were compared to the conventional Bacoma codend, which was fished simultaneously in a twin trawl rig. New codend designs were based on the Bacoma design, where the first test codend had a bottom net panel made of larger diamond meshes (nominal 130 mm mesh size) to improve selectivity in a cod fishery with high catch rates of flatfish. This codend showed a reduction of plaice and flounder, and cod below 45 cm, in the catches. The other test codend was a full square mesh codend (nominal 120 mm mesh size) developed for a cod directed fishery with low flatfish catches, and showed a marked reduction in the catch of cod below 50 cm, with no differences for flounder and plaice catches. With cod stocks at critically low levels and relatively high discard rates of cod, plaice and flounder, the simple codend designs tested in this study could benefit the sustainability of the Baltic cod trawl fishery, but with some loss of commercially targeted sizes.