A Changeable Jig-less Welding Cell for Subassembly of Construction Machinery

Publikation: Bidrag til bog/antologi/rapport/konference proceedingKonferenceartikel i proceedingForskningpeer review

1 Citation (Scopus)

Resumé

The cost and technological development of industrial robots suggests a substitution of labor-intensive processes. Jig-less welding is an example of an emerging concept that is derived from this development, providing high flexibility without compensating on efficiency. This paper presents a conceptual solution of a jig-less welding cell for a particular environment with the purpose of investigating potential, expected challenges to overcome before implementation. To investigate the expected, potential challenges the concept is applied to a case study that takes its outset in a low volume, high variety welding facility. A full-scale test on the setup have yet to be conducted.

OriginalsprogEngelsk
TitelAdvances in Production Management Systems. Production Management for Data-Driven, Intelligent, Collaborative, and Sustainable Manufacturing : IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part I
RedaktørerIlkyeong Moon, Jinwoo Park, Gyu M. Lee, Dimitris Kiritsis, Gregor von Cieminski
Antal sider7
Vol/bindPart I
Udgivelses stedSeoul, Korea
ForlagSpringer
Publikationsdato2018
Sider305-311
ISBN (Trykt)978-3-319-99703-2
ISBN (Elektronisk)978-3-319-99704-9
DOI
StatusUdgivet - 2018
BegivenhedIFIP WG 5.7 International Conference, APMS 2018 - Seoul National University, Seoul, Sydkorea
Varighed: 26 aug. 201830 sep. 2018

Konference

KonferenceIFIP WG 5.7 International Conference, APMS 2018
LokationSeoul National University
LandSydkorea
BySeoul
Periode26/08/201830/09/2018
NavnI F I P Advances in Information and Communication Technology
Vol/bind535
ISSN1868-4238

Fingerprint

Jigs
Machinery
Welding
Industrial robots
Substitution reactions
Personnel
Costs

Citer dette

Bejlegaard, M., Brunø, T. D., & Nielsen, K. (2018). A Changeable Jig-less Welding Cell for Subassembly of Construction Machinery. I I. Moon, J. Park, G. M. Lee, D. Kiritsis, & G. von Cieminski (red.), Advances in Production Management Systems. Production Management for Data-Driven, Intelligent, Collaborative, and Sustainable Manufacturing: IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part I (Bind Part I, s. 305-311). Seoul, Korea: Springer. I F I P Advances in Information and Communication Technology, Bind. 535 https://doi.org/10.1007/978-3-319-99704-9_37
Bejlegaard, Mads ; Brunø, Thomas Ditlev ; Nielsen, Kjeld. / A Changeable Jig-less Welding Cell for Subassembly of Construction Machinery. Advances in Production Management Systems. Production Management for Data-Driven, Intelligent, Collaborative, and Sustainable Manufacturing: IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part I. red. / Ilkyeong Moon ; Jinwoo Park ; Gyu M. Lee ; Dimitris Kiritsis ; Gregor von Cieminski. Bind Part I Seoul, Korea : Springer, 2018. s. 305-311 (I F I P Advances in Information and Communication Technology, Bind 535).
@inproceedings{87eaa8c9e1e54003b2820d4966922767,
title = "A Changeable Jig-less Welding Cell for Subassembly of Construction Machinery",
abstract = "The cost and technological development of industrial robots suggests a substitution of labor-intensive processes. Jig-less welding is an example of an emerging concept that is derived from this development, providing high flexibility without compensating on efficiency. This paper presents a conceptual solution of a jig-less welding cell for a particular environment with the purpose of investigating potential, expected challenges to overcome before implementation. To investigate the expected, potential challenges the concept is applied to a case study that takes its outset in a low volume, high variety welding facility. A full-scale test on the setup have yet to be conducted.",
keywords = "Changeability, Fixture-les welding, Fixtures, Flexibility, Industry 4.0 conformant welding, Jig-less welding, Jigs, Robot welding",
author = "Mads Bejlegaard and Brun{\o}, {Thomas Ditlev} and Kjeld Nielsen",
year = "2018",
doi = "10.1007/978-3-319-99704-9_37",
language = "English",
isbn = "978-3-319-99703-2",
volume = "Part I",
series = "I F I P Advances in Information and Communication Technology",
publisher = "Springer",
pages = "305--311",
editor = "Ilkyeong Moon and Jinwoo Park and Lee, {Gyu M.} and Dimitris Kiritsis and {von Cieminski}, Gregor",
booktitle = "Advances in Production Management Systems. Production Management for Data-Driven, Intelligent, Collaborative, and Sustainable Manufacturing",
address = "Germany",

}

Bejlegaard, M, Brunø, TD & Nielsen, K 2018, A Changeable Jig-less Welding Cell for Subassembly of Construction Machinery. i I Moon, J Park, GM Lee, D Kiritsis & G von Cieminski (red), Advances in Production Management Systems. Production Management for Data-Driven, Intelligent, Collaborative, and Sustainable Manufacturing: IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part I. bind Part I, Springer, Seoul, Korea, I F I P Advances in Information and Communication Technology, bind 535, s. 305-311, Seoul, Sydkorea, 26/08/2018. https://doi.org/10.1007/978-3-319-99704-9_37

A Changeable Jig-less Welding Cell for Subassembly of Construction Machinery. / Bejlegaard, Mads; Brunø, Thomas Ditlev; Nielsen, Kjeld.

Advances in Production Management Systems. Production Management for Data-Driven, Intelligent, Collaborative, and Sustainable Manufacturing: IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part I. red. / Ilkyeong Moon; Jinwoo Park; Gyu M. Lee; Dimitris Kiritsis; Gregor von Cieminski. Bind Part I Seoul, Korea : Springer, 2018. s. 305-311 (I F I P Advances in Information and Communication Technology, Bind 535).

Publikation: Bidrag til bog/antologi/rapport/konference proceedingKonferenceartikel i proceedingForskningpeer review

TY - GEN

T1 - A Changeable Jig-less Welding Cell for Subassembly of Construction Machinery

AU - Bejlegaard, Mads

AU - Brunø, Thomas Ditlev

AU - Nielsen, Kjeld

PY - 2018

Y1 - 2018

N2 - The cost and technological development of industrial robots suggests a substitution of labor-intensive processes. Jig-less welding is an example of an emerging concept that is derived from this development, providing high flexibility without compensating on efficiency. This paper presents a conceptual solution of a jig-less welding cell for a particular environment with the purpose of investigating potential, expected challenges to overcome before implementation. To investigate the expected, potential challenges the concept is applied to a case study that takes its outset in a low volume, high variety welding facility. A full-scale test on the setup have yet to be conducted.

AB - The cost and technological development of industrial robots suggests a substitution of labor-intensive processes. Jig-less welding is an example of an emerging concept that is derived from this development, providing high flexibility without compensating on efficiency. This paper presents a conceptual solution of a jig-less welding cell for a particular environment with the purpose of investigating potential, expected challenges to overcome before implementation. To investigate the expected, potential challenges the concept is applied to a case study that takes its outset in a low volume, high variety welding facility. A full-scale test on the setup have yet to be conducted.

KW - Changeability

KW - Fixture-les welding

KW - Fixtures

KW - Flexibility

KW - Industry 4.0 conformant welding

KW - Jig-less welding

KW - Jigs

KW - Robot welding

UR - http://www.scopus.com/inward/record.url?scp=85053261424&partnerID=8YFLogxK

U2 - 10.1007/978-3-319-99704-9_37

DO - 10.1007/978-3-319-99704-9_37

M3 - Article in proceeding

SN - 978-3-319-99703-2

VL - Part I

T3 - I F I P Advances in Information and Communication Technology

SP - 305

EP - 311

BT - Advances in Production Management Systems. Production Management for Data-Driven, Intelligent, Collaborative, and Sustainable Manufacturing

A2 - Moon, Ilkyeong

A2 - Park, Jinwoo

A2 - Lee, Gyu M.

A2 - Kiritsis, Dimitris

A2 - von Cieminski, Gregor

PB - Springer

CY - Seoul, Korea

ER -

Bejlegaard M, Brunø TD, Nielsen K. A Changeable Jig-less Welding Cell for Subassembly of Construction Machinery. I Moon I, Park J, Lee GM, Kiritsis D, von Cieminski G, red., Advances in Production Management Systems. Production Management for Data-Driven, Intelligent, Collaborative, and Sustainable Manufacturing: IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part I. Bind Part I. Seoul, Korea: Springer. 2018. s. 305-311. (I F I P Advances in Information and Communication Technology, Bind 535). https://doi.org/10.1007/978-3-319-99704-9_37