A Literature Review on Human Changeover Ability in High-Variety Production

Publikation: Bidrag til bog/antologi/rapport/konference proceedingKonferenceartikel i proceedingForskningpeer review

Resumé

The business strategy of Mass Customization, enabled by e.g. Reconfigurable Manufacturing and Changeable Manufacturing is based on the fundamental premise; to achieve high operational efficiency, while producing high-variety products in small batches and with short product-life cycle of the unique products. To efficiently achieve this premise in manufacturing systems, all levels of changeability must be addressed. This paper investigates a fundamental sub-set of this changeability, which has not been addressed comprehensively by academia; the human changeover ability on workstation level. Based on a literature review, this paper identifies seven human related challenges which must be addressed to be able to manage high-variety and low-volume efficiently on a changeover ability level. This leads to a subsequent literature review that aims at investigating possible approaches and solutions for the identified challenges. Overall seven approaches and solutions have been identified which address five of the seven identified challenges. This leaves two challenges open; the forgetting and learning curve. These two challenges are therefore proposed for further research to be at the cutting edge of an emerging challenge organizations striving for high-variety production will meet.
OriginalsprogEngelsk
TitelAdvances in Production Management Systems. Smart Manufacturing for Industry 4.0 : IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part II
RedaktørerIlkyeong Moon, Gyu M. Lee, Jinwoo Park, Dimitris Kiritsis, Gregor von Cieminski
Antal sider7
ForlagSpringer
Publikationsdato25 aug. 2018
Sider442-448
ISBN (Trykt)978-3-319-99706-3
ISBN (Elektronisk)978-3-319-99707-0
DOI
StatusUdgivet - 25 aug. 2018
BegivenhedIFIP International Conference on Advances in Production Management Systems: Production Management for Data-Driven, Intelligent, Collaborative, and Sustainable Manufacturing - Seoul, Sydkorea
Varighed: 26 aug. 201830 aug. 2018

Konference

KonferenceIFIP International Conference on Advances in Production Management Systems
LandSydkorea
BySeoul
Periode26/08/201830/08/2018
NavnI F I P Advances in Information and Communication Technology
Vol/bind536
ISSN1571-5736

Citer dette

Ketelsen, C., Andersen, R., Nielsen, K., Andersen, A-L., Brunoe, T. D., & Bech, S. (2018). A Literature Review on Human Changeover Ability in High-Variety Production. I I. Moon, G. M. Lee, J. Park, D. Kiritsis, & G. von Cieminski (red.), Advances in Production Management Systems. Smart Manufacturing for Industry 4.0: IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part II (s. 442-448). Springer. I F I P Advances in Information and Communication Technology, Bind. 536 https://doi.org/10.1007/978-3-319-99707-0_55
Ketelsen, Christopher ; Andersen, Rasmus ; Nielsen, Kjeld ; Andersen, Ann-Louise ; Brunoe, Thomas D. ; Bech, Sofie. / A Literature Review on Human Changeover Ability in High-Variety Production. Advances in Production Management Systems. Smart Manufacturing for Industry 4.0: IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part II. red. / Ilkyeong Moon ; Gyu M. Lee ; Jinwoo Park ; Dimitris Kiritsis ; Gregor von Cieminski. Springer, 2018. s. 442-448 (I F I P Advances in Information and Communication Technology, Bind 536).
@inproceedings{43158b2ee67c42d0a81f9348aac2deab,
title = "A Literature Review on Human Changeover Ability in High-Variety Production",
abstract = "The business strategy of Mass Customization, enabled by e.g. Reconfigurable Manufacturing and Changeable Manufacturing is based on the fundamental premise; to achieve high operational efficiency, while producing high-variety products in small batches and with short product-life cycle of the unique products. To efficiently achieve this premise in manufacturing systems, all levels of changeability must be addressed. This paper investigates a fundamental sub-set of this changeability, which has not been addressed comprehensively by academia; the human changeover ability on workstation level. Based on a literature review, this paper identifies seven human related challenges which must be addressed to be able to manage high-variety and low-volume efficiently on a changeover ability level. This leads to a subsequent literature review that aims at investigating possible approaches and solutions for the identified challenges. Overall seven approaches and solutions have been identified which address five of the seven identified challenges. This leaves two challenges open; the forgetting and learning curve. These two challenges are therefore proposed for further research to be at the cutting edge of an emerging challenge organizations striving for high-variety production will meet.",
author = "Christopher Ketelsen and Rasmus Andersen and Kjeld Nielsen and Ann-Louise Andersen and Brunoe, {Thomas D.} and Sofie Bech",
year = "2018",
month = "8",
day = "25",
doi = "10.1007/978-3-319-99707-0_55",
language = "English",
isbn = "978-3-319-99706-3",
pages = "442--448",
editor = "Ilkyeong Moon and Lee, {Gyu M.} and Jinwoo Park and Dimitris Kiritsis and {von Cieminski}, Gregor",
booktitle = "Advances in Production Management Systems. Smart Manufacturing for Industry 4.0",
publisher = "Springer",
address = "Germany",

}

Ketelsen, C, Andersen, R, Nielsen, K, Andersen, A-L, Brunoe, TD & Bech, S 2018, A Literature Review on Human Changeover Ability in High-Variety Production. i I Moon, GM Lee, J Park, D Kiritsis & G von Cieminski (red), Advances in Production Management Systems. Smart Manufacturing for Industry 4.0: IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part II. Springer, I F I P Advances in Information and Communication Technology, bind 536, s. 442-448, IFIP International Conference on Advances in Production Management Systems, Seoul, Sydkorea, 26/08/2018. https://doi.org/10.1007/978-3-319-99707-0_55

A Literature Review on Human Changeover Ability in High-Variety Production. / Ketelsen, Christopher; Andersen, Rasmus; Nielsen, Kjeld; Andersen, Ann-Louise; Brunoe, Thomas D.; Bech, Sofie.

Advances in Production Management Systems. Smart Manufacturing for Industry 4.0: IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part II. red. / Ilkyeong Moon; Gyu M. Lee; Jinwoo Park; Dimitris Kiritsis; Gregor von Cieminski. Springer, 2018. s. 442-448 (I F I P Advances in Information and Communication Technology, Bind 536).

Publikation: Bidrag til bog/antologi/rapport/konference proceedingKonferenceartikel i proceedingForskningpeer review

TY - GEN

T1 - A Literature Review on Human Changeover Ability in High-Variety Production

AU - Ketelsen, Christopher

AU - Andersen, Rasmus

AU - Nielsen, Kjeld

AU - Andersen, Ann-Louise

AU - Brunoe, Thomas D.

AU - Bech, Sofie

PY - 2018/8/25

Y1 - 2018/8/25

N2 - The business strategy of Mass Customization, enabled by e.g. Reconfigurable Manufacturing and Changeable Manufacturing is based on the fundamental premise; to achieve high operational efficiency, while producing high-variety products in small batches and with short product-life cycle of the unique products. To efficiently achieve this premise in manufacturing systems, all levels of changeability must be addressed. This paper investigates a fundamental sub-set of this changeability, which has not been addressed comprehensively by academia; the human changeover ability on workstation level. Based on a literature review, this paper identifies seven human related challenges which must be addressed to be able to manage high-variety and low-volume efficiently on a changeover ability level. This leads to a subsequent literature review that aims at investigating possible approaches and solutions for the identified challenges. Overall seven approaches and solutions have been identified which address five of the seven identified challenges. This leaves two challenges open; the forgetting and learning curve. These two challenges are therefore proposed for further research to be at the cutting edge of an emerging challenge organizations striving for high-variety production will meet.

AB - The business strategy of Mass Customization, enabled by e.g. Reconfigurable Manufacturing and Changeable Manufacturing is based on the fundamental premise; to achieve high operational efficiency, while producing high-variety products in small batches and with short product-life cycle of the unique products. To efficiently achieve this premise in manufacturing systems, all levels of changeability must be addressed. This paper investigates a fundamental sub-set of this changeability, which has not been addressed comprehensively by academia; the human changeover ability on workstation level. Based on a literature review, this paper identifies seven human related challenges which must be addressed to be able to manage high-variety and low-volume efficiently on a changeover ability level. This leads to a subsequent literature review that aims at investigating possible approaches and solutions for the identified challenges. Overall seven approaches and solutions have been identified which address five of the seven identified challenges. This leaves two challenges open; the forgetting and learning curve. These two challenges are therefore proposed for further research to be at the cutting edge of an emerging challenge organizations striving for high-variety production will meet.

U2 - 10.1007/978-3-319-99707-0_55

DO - 10.1007/978-3-319-99707-0_55

M3 - Article in proceeding

SN - 978-3-319-99706-3

SP - 442

EP - 448

BT - Advances in Production Management Systems. Smart Manufacturing for Industry 4.0

A2 - Moon, Ilkyeong

A2 - Lee, Gyu M.

A2 - Park, Jinwoo

A2 - Kiritsis, Dimitris

A2 - von Cieminski, Gregor

PB - Springer

ER -

Ketelsen C, Andersen R, Nielsen K, Andersen A-L, Brunoe TD, Bech S. A Literature Review on Human Changeover Ability in High-Variety Production. I Moon I, Lee GM, Park J, Kiritsis D, von Cieminski G, red., Advances in Production Management Systems. Smart Manufacturing for Industry 4.0: IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part II. Springer. 2018. s. 442-448. (I F I P Advances in Information and Communication Technology, Bind 536). https://doi.org/10.1007/978-3-319-99707-0_55