A Modular Finite Element Model for Analysis of Vibration Transmission in Multi-Storey Lightweight Buildings

Lars Vabbersgaard Andersen; Poul Henning Kirkegaard; K. Persson; Bin Niu

doi:10.4203/ccp.99.189

A Modular Finite Element Model for Analysis of Vibration Transmission in Multi-Storey Lightweight Buildings

Lars Vabbersgaard Andersen, Poul Henning Kirkegaard, K. Persson, Bin Niu

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

5 Citationer (Scopus)

Abstract

The paper concerns the development of a modular parametric finite-element model that can be applied to the analysis of vibro-acoustic problems in relation to multistory lightweight structures. Floors and walls can be modelled as structural elements, or substructures may be utilised for each type of module. A numerical example shows how the model can be employed to analyse a building with typical wooden panels made of plates on stud or joist frames. Computation times of less than half a second are obtained for a single frequency with a discretisation that is valid up to at least 250 Hz.

Originalsprog	Engelsk
Titel	Proceedings of the Eleventh International Conference on Computational Structures Technology : CST2012 & ECT2012
Redaktører	B. H. V. Topping
Antal sider	20
Udgivelsessted	Glasgow
Forlag	Civil-Comp Press
Publikationsdato	2012
ISBN (Elektronisk)	978-1-905088-54-6
DOI	https://doi.org/10.4203/ccp.99.189
Status	Udgivet - 2012
Begivenhed	The International Conference on Computational Structures Technology - Dubrovnik, Kroatien Varighed: 4 sep. 2012 → 7 sep. 2012 Konferencens nummer: 11

Konference

Konference	The International Conference on Computational Structures Technology
Nummer	11
Land/Område	Kroatien
By	Dubrovnik
Periode	04/09/2012 → 07/09/2012

Navn	Civil-Comp Proceedings
Nummer	99
ISSN	1759-3433

Bibliografisk note

The paper is presented in the special session "Numerical Analysis of Low-Frequency Vibrations in Lightweight Buildings"

Emneord

Finite Element Method
Modular
Parametric
Building
Acoustics
Vibration
Dynamics

Adgang til dokumentet

10.4203/ccp.99.189

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

Andersen, Lars Vabbersgaard ; Kirkegaard, Poul Henning ; Persson, K. et al. / A Modular Finite Element Model for Analysis of Vibration Transmission in Multi-Storey Lightweight Buildings. Proceedings of the Eleventh International Conference on Computational Structures Technology: CST2012 & ECT2012. red. / B. H. V. Topping. Glasgow : Civil-Comp Press, 2012. (Civil-Comp Proceedings; Nr. 99).

@inproceedings{fff2713ffa6640119ac29863eaca9636,

title = "A Modular Finite Element Model for Analysis of Vibration Transmission in Multi-Storey Lightweight Buildings",

abstract = "The paper concerns the development of a modular parametric finite-element model that can be applied to the analysis of vibro-acoustic problems in relation to multistory lightweight structures. Floors and walls can be modelled as structural elements, or substructures may be utilised for each type of module. A numerical example shows how the model can be employed to analyse a building with typical wooden panels made of plates on stud or joist frames. Computation times of less than half a second are obtained for a single frequency with a discretisation that is valid up to at least 250 Hz.",

keywords = "Finite Element Method, Modular, Parametric, Building, Acoustics, Vibration, Dynamics, Finite Element Method, Modular, Parametric, Building, Acoustics, Vibration, Dynamics",

author = "Andersen, {Lars Vabbersgaard} and Kirkegaard, {Poul Henning} and K. Persson and Bin Niu",

note = "The paper is presented in the special session {"}Numerical Analysis of Low-Frequency Vibrations in Lightweight Buildings{"}; The International Conference on Computational Structures Technology ; Conference date: 04-09-2012 Through 07-09-2012",

year = "2012",

doi = "10.4203/ccp.99.189",

language = "English",

series = "Civil-Comp Proceedings",

publisher = "Civil-Comp Press",

number = "99",

editor = "Topping, {B. H. V.}",

booktitle = "Proceedings of the Eleventh International Conference on Computational Structures Technology",

}

Andersen, LV, Kirkegaard, PH, Persson, K & Niu, B 2012, A Modular Finite Element Model for Analysis of Vibration Transmission in Multi-Storey Lightweight Buildings. i BHV Topping (red.), Proceedings of the Eleventh International Conference on Computational Structures Technology: CST2012 & ECT2012. Civil-Comp Press, Glasgow, Civil-Comp Proceedings, nr. 99, The International Conference on Computational Structures Technology, Dubrovnik, Kroatien, 04/09/2012. https://doi.org/10.4203/ccp.99.189

A Modular Finite Element Model for Analysis of Vibration Transmission in Multi-Storey Lightweight Buildings. / Andersen, Lars Vabbersgaard; Kirkegaard, Poul Henning; Persson, K. et al.
Proceedings of the Eleventh International Conference on Computational Structures Technology: CST2012 & ECT2012. red. / B. H. V. Topping. Glasgow: Civil-Comp Press, 2012. (Civil-Comp Proceedings; Nr. 99).

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - A Modular Finite Element Model for Analysis of Vibration Transmission in Multi-Storey Lightweight Buildings

AU - Andersen, Lars Vabbersgaard

AU - Kirkegaard, Poul Henning

AU - Persson, K.

AU - Niu, Bin

N1 - Conference code: 11

PY - 2012

Y1 - 2012

N2 - The paper concerns the development of a modular parametric finite-element model that can be applied to the analysis of vibro-acoustic problems in relation to multistory lightweight structures. Floors and walls can be modelled as structural elements, or substructures may be utilised for each type of module. A numerical example shows how the model can be employed to analyse a building with typical wooden panels made of plates on stud or joist frames. Computation times of less than half a second are obtained for a single frequency with a discretisation that is valid up to at least 250 Hz.

AB - The paper concerns the development of a modular parametric finite-element model that can be applied to the analysis of vibro-acoustic problems in relation to multistory lightweight structures. Floors and walls can be modelled as structural elements, or substructures may be utilised for each type of module. A numerical example shows how the model can be employed to analyse a building with typical wooden panels made of plates on stud or joist frames. Computation times of less than half a second are obtained for a single frequency with a discretisation that is valid up to at least 250 Hz.

KW - Finite Element Method

KW - Modular

KW - Parametric

KW - Building

KW - Acoustics

KW - Vibration

KW - Dynamics

KW - Finite Element Method

KW - Modular

KW - Parametric

KW - Building

KW - Acoustics

KW - Vibration

KW - Dynamics

U2 - 10.4203/ccp.99.189

DO - 10.4203/ccp.99.189

M3 - Article in proceeding

T3 - Civil-Comp Proceedings

BT - Proceedings of the Eleventh International Conference on Computational Structures Technology

A2 - Topping, B. H. V.

PB - Civil-Comp Press

CY - Glasgow

T2 - The International Conference on Computational Structures Technology

Y2 - 4 September 2012 through 7 September 2012

ER -

Andersen LV, Kirkegaard PH, Persson K, Niu B. A Modular Finite Element Model for Analysis of Vibration Transmission in Multi-Storey Lightweight Buildings. I Topping BHV, red., Proceedings of the Eleventh International Conference on Computational Structures Technology: CST2012 & ECT2012. Glasgow: Civil-Comp Press. 2012. (Civil-Comp Proceedings; Nr. 99). doi: 10.4203/ccp.99.189

A Modular Finite Element Model for Analysis of Vibration Transmission in Multi-Storey Lightweight Buildings

Abstract

Konference

Bibliografisk note

Emneord

Adgang til dokumentet

AUB Link

Fingeraftryk

Citationsformater