Accurate Fuel Estimates using CAN Bus Data and 3D Maps

Ove Andersen, Kristian Torp

Publikation: Bidrag til bog/antologi/rapport/konference proceedingKonferenceartikel i proceedingForskningpeer review

Resumé

The focus on reducing CO 2 emissions from the transport sector is larger than ever. Increasingly stricter reductions on fuel consumption and emissions are being introduced by the EU, e.g., to reduce the air pollution in many larger cities. Large sets of high-frequent GPS data from vehicles already exist. However, fuel consumption data is still rarely collected even though it is possible to measure the fuel consumption with high accuracy, e.g., using an OBD-II device and a smartphone. This paper, presents a method for comparing fuel-consumption estimates using the SIDRA TRIP model with real fuel measures to determine if the fuel-consumption model is sufficiently accurate. The model is implemented using a 2D, a simple 3D, and a high-precision (H3D) road map of Denmark. The original 2D map is lifted to a 3D map using a Digital Elevation Model (DEM). Results show that introducing a 3D map improves the accuracy of fuel consumption estimates with up to 40% on hilly roads. There is only very little improvement of the high-precision (H3D) map over the simple 3D map. The fuel consumption estimates are most accurate on flat terrain with average fuel estimates of up to 99% accuracy. The fuel estimates are most inaccurate uphill/downhill and when the vehicles accelerate at speeds above 50 km/h.
OriginalsprogEngelsk
Titel2018 19th IEEE International Conference on Mobile Data Management (MDM)
Antal sider9
ForlagIEEE
Publikationsdatojun. 2018
Sider257-265
ISBN (Trykt)978-1-5386-4134-7
ISBN (Elektronisk)978-1-5386-4133-0
DOI
StatusUdgivet - jun. 2018
Begivenhed19th IEEE International Conference on Mobile Data Management, MDM 2018 - Aalborg, Danmark
Varighed: 25 jun. 201828 jun. 2018

Konference

Konference19th IEEE International Conference on Mobile Data Management, MDM 2018
LandDanmark
ByAalborg
Periode25/06/201828/06/2018
SponsorAalborg University, Center for Data-Intensive Systems (DAISY), Aalborg University, IEEE, IEEE Technical Committee on Data Engineering (TCDE), Otto Monsted Foundation
NavnIEEE International Conference on Mobile Data Management (MDM)
ISSN2375-0324

Citer dette

Andersen, O., & Torp, K. (2018). Accurate Fuel Estimates using CAN Bus Data and 3D Maps. I 2018 19th IEEE International Conference on Mobile Data Management (MDM) (s. 257-265). IEEE. IEEE International Conference on Mobile Data Management (MDM) https://doi.org/10.1109/MDM.2018.00045
Andersen, Ove ; Torp, Kristian. / Accurate Fuel Estimates using CAN Bus Data and 3D Maps. 2018 19th IEEE International Conference on Mobile Data Management (MDM). IEEE, 2018. s. 257-265 (IEEE International Conference on Mobile Data Management (MDM)).
@inproceedings{ee170b33417241c581cd274e787492f0,
title = "Accurate Fuel Estimates using CAN Bus Data and 3D Maps",
abstract = "The focus on reducing CO 2 emissions from the transport sector is larger than ever. Increasingly stricter reductions on fuel consumption and emissions are being introduced by the EU, e.g., to reduce the air pollution in many larger cities. Large sets of high-frequent GPS data from vehicles already exist. However, fuel consumption data is still rarely collected even though it is possible to measure the fuel consumption with high accuracy, e.g., using an OBD-II device and a smartphone. This paper, presents a method for comparing fuel-consumption estimates using the SIDRA TRIP model with real fuel measures to determine if the fuel-consumption model is sufficiently accurate. The model is implemented using a 2D, a simple 3D, and a high-precision (H3D) road map of Denmark. The original 2D map is lifted to a 3D map using a Digital Elevation Model (DEM). Results show that introducing a 3D map improves the accuracy of fuel consumption estimates with up to 40{\%} on hilly roads. There is only very little improvement of the high-precision (H3D) map over the simple 3D map. The fuel consumption estimates are most accurate on flat terrain with average fuel estimates of up to 99{\%} accuracy. The fuel estimates are most inaccurate uphill/downhill and when the vehicles accelerate at speeds above 50 km/h.",
keywords = "Fuel, GPS, Map, elevate, model",
author = "Ove Andersen and Kristian Torp",
year = "2018",
month = "6",
doi = "10.1109/MDM.2018.00045",
language = "English",
isbn = "978-1-5386-4134-7",
series = "IEEE International Conference on Mobile Data Management (MDM)",
publisher = "IEEE",
pages = "257--265",
booktitle = "2018 19th IEEE International Conference on Mobile Data Management (MDM)",
address = "United States",

}

Andersen, O & Torp, K 2018, Accurate Fuel Estimates using CAN Bus Data and 3D Maps. i 2018 19th IEEE International Conference on Mobile Data Management (MDM). IEEE, IEEE International Conference on Mobile Data Management (MDM), s. 257-265, 19th IEEE International Conference on Mobile Data Management, MDM 2018, Aalborg, Danmark, 25/06/2018. https://doi.org/10.1109/MDM.2018.00045

Accurate Fuel Estimates using CAN Bus Data and 3D Maps. / Andersen, Ove; Torp, Kristian.

2018 19th IEEE International Conference on Mobile Data Management (MDM). IEEE, 2018. s. 257-265 (IEEE International Conference on Mobile Data Management (MDM)).

Publikation: Bidrag til bog/antologi/rapport/konference proceedingKonferenceartikel i proceedingForskningpeer review

TY - GEN

T1 - Accurate Fuel Estimates using CAN Bus Data and 3D Maps

AU - Andersen, Ove

AU - Torp, Kristian

PY - 2018/6

Y1 - 2018/6

N2 - The focus on reducing CO 2 emissions from the transport sector is larger than ever. Increasingly stricter reductions on fuel consumption and emissions are being introduced by the EU, e.g., to reduce the air pollution in many larger cities. Large sets of high-frequent GPS data from vehicles already exist. However, fuel consumption data is still rarely collected even though it is possible to measure the fuel consumption with high accuracy, e.g., using an OBD-II device and a smartphone. This paper, presents a method for comparing fuel-consumption estimates using the SIDRA TRIP model with real fuel measures to determine if the fuel-consumption model is sufficiently accurate. The model is implemented using a 2D, a simple 3D, and a high-precision (H3D) road map of Denmark. The original 2D map is lifted to a 3D map using a Digital Elevation Model (DEM). Results show that introducing a 3D map improves the accuracy of fuel consumption estimates with up to 40% on hilly roads. There is only very little improvement of the high-precision (H3D) map over the simple 3D map. The fuel consumption estimates are most accurate on flat terrain with average fuel estimates of up to 99% accuracy. The fuel estimates are most inaccurate uphill/downhill and when the vehicles accelerate at speeds above 50 km/h.

AB - The focus on reducing CO 2 emissions from the transport sector is larger than ever. Increasingly stricter reductions on fuel consumption and emissions are being introduced by the EU, e.g., to reduce the air pollution in many larger cities. Large sets of high-frequent GPS data from vehicles already exist. However, fuel consumption data is still rarely collected even though it is possible to measure the fuel consumption with high accuracy, e.g., using an OBD-II device and a smartphone. This paper, presents a method for comparing fuel-consumption estimates using the SIDRA TRIP model with real fuel measures to determine if the fuel-consumption model is sufficiently accurate. The model is implemented using a 2D, a simple 3D, and a high-precision (H3D) road map of Denmark. The original 2D map is lifted to a 3D map using a Digital Elevation Model (DEM). Results show that introducing a 3D map improves the accuracy of fuel consumption estimates with up to 40% on hilly roads. There is only very little improvement of the high-precision (H3D) map over the simple 3D map. The fuel consumption estimates are most accurate on flat terrain with average fuel estimates of up to 99% accuracy. The fuel estimates are most inaccurate uphill/downhill and when the vehicles accelerate at speeds above 50 km/h.

KW - Fuel

KW - GPS

KW - Map

KW - elevate

KW - model

UR - http://www.scopus.com/inward/record.url?scp=85050828497&partnerID=8YFLogxK

U2 - 10.1109/MDM.2018.00045

DO - 10.1109/MDM.2018.00045

M3 - Article in proceeding

SN - 978-1-5386-4134-7

T3 - IEEE International Conference on Mobile Data Management (MDM)

SP - 257

EP - 265

BT - 2018 19th IEEE International Conference on Mobile Data Management (MDM)

PB - IEEE

ER -

Andersen O, Torp K. Accurate Fuel Estimates using CAN Bus Data and 3D Maps. I 2018 19th IEEE International Conference on Mobile Data Management (MDM). IEEE. 2018. s. 257-265. (IEEE International Conference on Mobile Data Management (MDM)). https://doi.org/10.1109/MDM.2018.00045