"Active flux" orientation vector sensorless control of IPMSM

Frede Blaabjerg; I. Boldea; M.C. Paicu; G.D. Andreescu

doi:10.1109/OPTIM.2008.4602404

"Active flux" orientation vector sensorless control of IPMSM

Frede Blaabjerg, I. Boldea, M.C. Paicu, G.D. Andreescu

AAU Energi

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

22 Citationer (Scopus)

2703 Downloads (Pure)

Abstract

This paper presents a novel strategy for the vector control of IPMSM, without signal injection. The overall performance of the motion-sensorless control depends strongly on the accuracy of the rotor position and speed estimation. The proposed state observer is based on the concept of the ldquoactive fluxrdquo (or ldquotorque producing fluxrdquo), which ldquoturns all the salient-pole rotor ac machines into nonsalient-pole onesrdquo. As well as giving a detailed explanation of the concept, the paper demonstrates, through a wide range of experimental results, the effectiveness of the active flux observer under half full rated torque operating conditions in 2 rpm-1000 rpm speed range.

Originalsprog	Engelsk
Titel	11th International Conference on Optimization of Electrical and Electronic Equipment, 2008. OPTIM 2008.
Antal sider	8
Forlag	IEEE
Publikationsdato	2008
Sider	161-168
ISBN (Trykt)	978-1-4244-1544-1
DOI	https://doi.org/10.1109/OPTIM.2008.4602404
Status	Udgivet - 2008
Begivenhed	11th International Conference on Optimization of Electrical and Electronic Equipment, 2008. OPTIM 2008. - Brasov, Rumænien Varighed: 22 maj 2008 → 24 maj 2008

Konference

Konference	11th International Conference on Optimization of Electrical and Electronic Equipment, 2008. OPTIM 2008.
Land/Område	Rumænien
By	Brasov
Periode	22/05/2008 → 24/05/2008

Bibliografisk note

INSPEC Accession Number:10160136

Adgang til dokumentet

10.1109/OPTIM.2008.4602404

Active Flux Orientation Vector Sensorless ControlForlagets udgivne version, 793 KB

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

@inproceedings{191c5b50db2311dda016000ea68e967b,

title = "{"}Active flux{"} orientation vector sensorless control of IPMSM",

abstract = "This paper presents a novel strategy for the vector control of IPMSM, without signal injection. The overall performance of the motion-sensorless control depends strongly on the accuracy of the rotor position and speed estimation. The proposed state observer is based on the concept of the ldquoactive fluxrdquo (or ldquotorque producing fluxrdquo), which ldquoturns all the salient-pole rotor ac machines into nonsalient-pole onesrdquo. As well as giving a detailed explanation of the concept, the paper demonstrates, through a wide range of experimental results, the effectiveness of the active flux observer under half full rated torque operating conditions in 2 rpm-1000 rpm speed range.",

author = "Frede Blaabjerg and I. Boldea and M.C. Paicu and G.D. Andreescu",

note = "INSPEC Accession Number:10160136; 11th International Conference on Optimization of Electrical and Electronic Equipment, 2008. OPTIM 2008. ; Conference date: 22-05-2008 Through 24-05-2008",

year = "2008",

doi = "10.1109/OPTIM.2008.4602404",

language = "English",

isbn = "978-1-4244-1544-1",

pages = "161--168",

booktitle = "11th International Conference on Optimization of Electrical and Electronic Equipment, 2008. OPTIM 2008.",

publisher = "IEEE",

address = "United States",

}

Blaabjerg, F, Boldea, I, Paicu, MC & Andreescu, GD 2008, "Active flux" orientation vector sensorless control of IPMSM. i 11th International Conference on Optimization of Electrical and Electronic Equipment, 2008. OPTIM 2008.. IEEE, s. 161-168, 11th International Conference on Optimization of Electrical and Electronic Equipment, 2008. OPTIM 2008., Brasov, Rumænien, 22/05/2008. https://doi.org/10.1109/OPTIM.2008.4602404

"Active flux" orientation vector sensorless control of IPMSM. / Blaabjerg, Frede; Boldea, I.; Paicu, M.C. et al.
11th International Conference on Optimization of Electrical and Electronic Equipment, 2008. OPTIM 2008.. IEEE, 2008. s. 161-168.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - "Active flux" orientation vector sensorless control of IPMSM

AU - Blaabjerg, Frede

AU - Boldea, I.

AU - Paicu, M.C.

AU - Andreescu, G.D.

N1 - INSPEC Accession Number:10160136

PY - 2008

Y1 - 2008

N2 - This paper presents a novel strategy for the vector control of IPMSM, without signal injection. The overall performance of the motion-sensorless control depends strongly on the accuracy of the rotor position and speed estimation. The proposed state observer is based on the concept of the ldquoactive fluxrdquo (or ldquotorque producing fluxrdquo), which ldquoturns all the salient-pole rotor ac machines into nonsalient-pole onesrdquo. As well as giving a detailed explanation of the concept, the paper demonstrates, through a wide range of experimental results, the effectiveness of the active flux observer under half full rated torque operating conditions in 2 rpm-1000 rpm speed range.

AB - This paper presents a novel strategy for the vector control of IPMSM, without signal injection. The overall performance of the motion-sensorless control depends strongly on the accuracy of the rotor position and speed estimation. The proposed state observer is based on the concept of the ldquoactive fluxrdquo (or ldquotorque producing fluxrdquo), which ldquoturns all the salient-pole rotor ac machines into nonsalient-pole onesrdquo. As well as giving a detailed explanation of the concept, the paper demonstrates, through a wide range of experimental results, the effectiveness of the active flux observer under half full rated torque operating conditions in 2 rpm-1000 rpm speed range.

U2 - 10.1109/OPTIM.2008.4602404

DO - 10.1109/OPTIM.2008.4602404

M3 - Article in proceeding

SN - 978-1-4244-1544-1

SP - 161

EP - 168

BT - 11th International Conference on Optimization of Electrical and Electronic Equipment, 2008. OPTIM 2008.

PB - IEEE

T2 - 11th International Conference on Optimization of Electrical and Electronic Equipment, 2008. OPTIM 2008.

Y2 - 22 May 2008 through 24 May 2008

ER -

"Active flux" orientation vector sensorless control of IPMSM

Abstract

Konference

Bibliografisk note

Adgang til dokumentet

AUB Link

Fingeraftryk

Citationsformater