Active vibration control of flutter instability of wind turbine blades

Classical flutter of a wind turbine blade is a concerned issue to hinder the wind utilization to a large extent. Recent predictions showed a decreasing flutter margin (the ratio of flutter speed to rated rotor speed) with the increase in wind turbine size. To address this issue, a new blade configuration called the double-pitched blade is proposed and analytically investigated for its potential to enhance the flutter suppressing capability of modern large-size wind turbine blades. This new blade comprise an inner part and a tip part, where the tip part can rotate (or pitch) independently with respect to the inner part through a tip actuator commanded by a feedback control law. The aerodynamic loads of blade tip due to the actively controlled rotation of the tip part provide a torque on the inner part, which provides damping for the torsional mode of the wind turbine blade. The effectiveness of this new double-pitched blade for suppressing flutter is verified through a simulation study conducted on a 907-DOF aero-servo-elastic wind turbine model. Parametric studies are performed on two main design parameters, i.e. the length of the tip part and the associated chordwise location of tip shaft with respected to the blade cross section, and flutter control performance are obtained by numerical optimization process. Simulation results show the optimal length of tip part is around of blade length, and the associated chordwise location of tip shaft is around of chord length, the flutter amplitude of the conventional blade can be mitigated to around using this double-pitched blade.