Compliant Aerial Manipulators: Toward a New Generation of Aerial Robotic Workers

T. Bartelds, A. Capra, S. Hamaza, S. Stramigioli, M. Fumagalli

Publikation: Bidrag til tidsskriftLetterForskningpeer review

37 Citationer (Scopus)

Resumé

This letter focuses on the problem of handling impacts by means of an aerial manipulator and proposes a solution that combines the control of the aerial manipulator's end-effector position with an innovative design approach of aerial manipulation systems, consisting of both active and passive joints. The approach aims at limiting the influence of impacts on the controlled attitude dynamics in order to allow the aerial manipulator to remain stable during and after impact. The developed concept is intended to convert kinetic energy into potential energy, which is permanently stored into elastic elements by means of directional locking mechanisms. The proposed approach has been tested on a 2 d.o.f. manipulator mounted on a quadrotor UAV. The manipulation system has one active rotational d.o.f. compensating for pitch movements of the UAV and one passive linear joint which is in charge of absorbing the impact energy. The device has been used to validate the method through experiments, in comparison with a rigid manipulator. The results show that the proposed approach and the developed mechanical system achieve stable impact absorption without bouncing away from the interacting environment. Our work has the ambition to propose a new direction towards aerial manipulators that are capable of performing highly dynamic physical interaction tasks.

OriginalsprogEngelsk
Artikelnummer7387723
TidsskriftIEEE Robotics and Automation Letters
Vol/bind1
Udgave nummer1
Sider (fra-til)477-483
Antal sider7
ISSN2377-3766
DOI
StatusUdgivet - 1 jan. 2016

Fingerprint

Manipulator
Manipulators
Robotics
Antennas
Unmanned aerial vehicles (UAV)
Manipulation
Locking
End effectors
Potential energy
Energy
Kinetic energy
Absorbing
Mechanical Systems
Convert
Absorption
Limiting
Charge
Interaction
Experiment
Experiments

Emneord

  • Mechanism Design of Mobile Robots
  • Aerial Robotics
  • Compliant Joint/Mechanism

Citer dette

Bartelds, T. ; Capra, A. ; Hamaza, S. ; Stramigioli, S. ; Fumagalli, M. / Compliant Aerial Manipulators : Toward a New Generation of Aerial Robotic Workers. I: IEEE Robotics and Automation Letters. 2016 ; Bind 1, Nr. 1. s. 477-483.
@article{d3d74025656043898fca37b5784bb539,
title = "Compliant Aerial Manipulators: Toward a New Generation of Aerial Robotic Workers",
abstract = "This letter focuses on the problem of handling impacts by means of an aerial manipulator and proposes a solution that combines the control of the aerial manipulator's end-effector position with an innovative design approach of aerial manipulation systems, consisting of both active and passive joints. The approach aims at limiting the influence of impacts on the controlled attitude dynamics in order to allow the aerial manipulator to remain stable during and after impact. The developed concept is intended to convert kinetic energy into potential energy, which is permanently stored into elastic elements by means of directional locking mechanisms. The proposed approach has been tested on a 2 d.o.f. manipulator mounted on a quadrotor UAV. The manipulation system has one active rotational d.o.f. compensating for pitch movements of the UAV and one passive linear joint which is in charge of absorbing the impact energy. The device has been used to validate the method through experiments, in comparison with a rigid manipulator. The results show that the proposed approach and the developed mechanical system achieve stable impact absorption without bouncing away from the interacting environment. Our work has the ambition to propose a new direction towards aerial manipulators that are capable of performing highly dynamic physical interaction tasks.",
keywords = "Aerial Robotics, Compliant Joint/Mechanism, Mechanism Design of Mobile Robots, Mechanism Design of Mobile Robots, Aerial Robotics, Compliant Joint/Mechanism",
author = "T. Bartelds and A. Capra and S. Hamaza and S. Stramigioli and M. Fumagalli",
year = "2016",
month = "1",
day = "1",
doi = "10.1109/LRA.2016.2519948",
language = "English",
volume = "1",
pages = "477--483",
journal = "IEEE Robotics and Automation Letters",
issn = "2377-3766",
publisher = "IEEE Communications Society",
number = "1",

}

Compliant Aerial Manipulators : Toward a New Generation of Aerial Robotic Workers. / Bartelds, T.; Capra, A.; Hamaza, S.; Stramigioli, S.; Fumagalli, M.

I: IEEE Robotics and Automation Letters, Bind 1, Nr. 1, 7387723, 01.01.2016, s. 477-483.

Publikation: Bidrag til tidsskriftLetterForskningpeer review

TY - JOUR

T1 - Compliant Aerial Manipulators

T2 - Toward a New Generation of Aerial Robotic Workers

AU - Bartelds, T.

AU - Capra, A.

AU - Hamaza, S.

AU - Stramigioli, S.

AU - Fumagalli, M.

PY - 2016/1/1

Y1 - 2016/1/1

N2 - This letter focuses on the problem of handling impacts by means of an aerial manipulator and proposes a solution that combines the control of the aerial manipulator's end-effector position with an innovative design approach of aerial manipulation systems, consisting of both active and passive joints. The approach aims at limiting the influence of impacts on the controlled attitude dynamics in order to allow the aerial manipulator to remain stable during and after impact. The developed concept is intended to convert kinetic energy into potential energy, which is permanently stored into elastic elements by means of directional locking mechanisms. The proposed approach has been tested on a 2 d.o.f. manipulator mounted on a quadrotor UAV. The manipulation system has one active rotational d.o.f. compensating for pitch movements of the UAV and one passive linear joint which is in charge of absorbing the impact energy. The device has been used to validate the method through experiments, in comparison with a rigid manipulator. The results show that the proposed approach and the developed mechanical system achieve stable impact absorption without bouncing away from the interacting environment. Our work has the ambition to propose a new direction towards aerial manipulators that are capable of performing highly dynamic physical interaction tasks.

AB - This letter focuses on the problem of handling impacts by means of an aerial manipulator and proposes a solution that combines the control of the aerial manipulator's end-effector position with an innovative design approach of aerial manipulation systems, consisting of both active and passive joints. The approach aims at limiting the influence of impacts on the controlled attitude dynamics in order to allow the aerial manipulator to remain stable during and after impact. The developed concept is intended to convert kinetic energy into potential energy, which is permanently stored into elastic elements by means of directional locking mechanisms. The proposed approach has been tested on a 2 d.o.f. manipulator mounted on a quadrotor UAV. The manipulation system has one active rotational d.o.f. compensating for pitch movements of the UAV and one passive linear joint which is in charge of absorbing the impact energy. The device has been used to validate the method through experiments, in comparison with a rigid manipulator. The results show that the proposed approach and the developed mechanical system achieve stable impact absorption without bouncing away from the interacting environment. Our work has the ambition to propose a new direction towards aerial manipulators that are capable of performing highly dynamic physical interaction tasks.

KW - Aerial Robotics

KW - Compliant Joint/Mechanism

KW - Mechanism Design of Mobile Robots

KW - Mechanism Design of Mobile Robots

KW - Aerial Robotics

KW - Compliant Joint/Mechanism

UR - http://www.scopus.com/inward/record.url?scp=85000352405&partnerID=8YFLogxK

U2 - 10.1109/LRA.2016.2519948

DO - 10.1109/LRA.2016.2519948

M3 - Letter

VL - 1

SP - 477

EP - 483

JO - IEEE Robotics and Automation Letters

JF - IEEE Robotics and Automation Letters

SN - 2377-3766

IS - 1

M1 - 7387723

ER -