Configurations of Modified SEPIC Converter with Switched Inductor Module (MSCsI) for Photovoltaic Application: Part-II

Pandav Kiran Maroti; Sanjeevikumar Padmanaban; Dan M. Ionel; Pierluigi Siano; Zbigniew Leonowicz

doi:10.1109/EEEIC.2018.8493845

Configurations of Modified SEPIC Converter with Switched Inductor Module (MSC_sI) for Photovoltaic Application: Part-II

Pandav Kiran Maroti, Sanjeevikumar Padmanaban, Dan M. Ionel, Pierluigi Siano, Zbigniew Leonowicz

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

4 Citationer (Scopus)

Abstract

The proposed work is extended configurations of Modified SEPIC Converter (MSC) and Modified SEPIC Converter with Switched Module (MSC SI ). The proposed three configurations are derived by replacing two inductor of MSC by two Switched Inductor (SI) modules, namely Modified SEPIC Converter with XYL configuration (MSC SI -XYL), Modified SEPIC Converter with LYZ configuration (MSC SI -LYZ) and Modified SEPIC Converter with XLZ configuration (MSC SI -XLZ) to improve or increase the overall gain of the converter. The key feature of proposed configuration is: (i) single switch topologies, (ii) no reverse current flow from load to source due to large inductor at the input side, (iii) high voltage conversion ratio. The detailed analysis of three configurations is done in terms of component count, voltage conversion ratio and efficiency. The mathematical analysis and simulation results validates the functionality of three configurations.

Originalsprog	Engelsk
Titel	Proceedings of the 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2018
Forlag	IEEE Press
Publikationsdato	jun. 2018
Artikelnummer	8493845
ISBN (Trykt)	978-1-5386-5187-2
ISBN (Elektronisk)	978-1-5386-5186-5
DOI	https://doi.org/10.1109/EEEIC.2018.8493845
Status	Udgivet - jun. 2018
Begivenhed	2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2018 - Palermo, Italien Varighed: 12 jun. 2018 → 15 jun. 2018

Konference

Konference	2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2018
Land/Område	Italien
By	Palermo
Periode	12/06/2018 → 15/06/2018
Sponsor	IEEE EMC Society, IEEE Industry Applications Society (IAS), IEEE Power and Energy Society (PES)

Adgang til dokumentet

10.1109/EEEIC.2018.8493845

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Andre filer og links

http://www.scopus.com/inward/record.url?scp=85056492226&partnerID=8YFLogxK

Citationsformater

Maroti, P. K., Padmanaban, S., Ionel, D. M., Siano, P., & Leonowicz, Z. (2018). Configurations of Modified SEPIC Converter with Switched Inductor Module (MSC_sI) for Photovoltaic Application: Part-II. I Proceedings of the 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2018 Artikel 8493845 IEEE Press. https://doi.org/10.1109/EEEIC.2018.8493845

Maroti, Pandav Kiran ; Padmanaban, Sanjeevikumar ; Ionel, Dan M. et al. / Configurations of Modified SEPIC Converter with Switched Inductor Module (MSC_sI) for Photovoltaic Application : Part-II. Proceedings of the 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2018. IEEE Press, 2018.

@inproceedings{e52841927db4421ba25c51006a51a94b,

title = "Configurations of Modified SEPIC Converter with Switched Inductor Module (MSCsI) for Photovoltaic Application: Part-II",

abstract = "The proposed work is extended configurations of Modified SEPIC Converter (MSC) and Modified SEPIC Converter with Switched Module (MSC SI ). The proposed three configurations are derived by replacing two inductor of MSC by two Switched Inductor (SI) modules, namely Modified SEPIC Converter with XYL configuration (MSC SI -XYL), Modified SEPIC Converter with LYZ configuration (MSC SI -LYZ) and Modified SEPIC Converter with XLZ configuration (MSC SI -XLZ) to improve or increase the overall gain of the converter. The key feature of proposed configuration is: (i) single switch topologies, (ii) no reverse current flow from load to source due to large inductor at the input side, (iii) high voltage conversion ratio. The detailed analysis of three configurations is done in terms of component count, voltage conversion ratio and efficiency. The mathematical analysis and simulation results validates the functionality of three configurations.",

keywords = "High Gain DC-DC Converter, Modified SEPIC Converter, Photovoltaic Application, Switched Inductor",

author = "Maroti, {Pandav Kiran} and Sanjeevikumar Padmanaban and Ionel, {Dan M.} and Pierluigi Siano and Zbigniew Leonowicz",

year = "2018",

month = jun,

doi = "10.1109/EEEIC.2018.8493845",

language = "English",

isbn = "978-1-5386-5187-2",

booktitle = "Proceedings of the 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2018",

publisher = "IEEE Press",

note = "2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2018 ; Conference date: 12-06-2018 Through 15-06-2018",

}

Maroti, PK, Padmanaban, S, Ionel, DM, Siano, P & Leonowicz, Z 2018, Configurations of Modified SEPIC Converter with Switched Inductor Module (MSC_sI) for Photovoltaic Application: Part-II. i Proceedings of the 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2018., 8493845, IEEE Press, 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2018, Palermo, Italien, 12/06/2018. https://doi.org/10.1109/EEEIC.2018.8493845

Configurations of Modified SEPIC Converter with Switched Inductor Module (MSC_sI) for Photovoltaic Application: Part-II. / Maroti, Pandav Kiran; Padmanaban, Sanjeevikumar; Ionel, Dan M. et al.
Proceedings of the 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2018. IEEE Press, 2018. 8493845.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Configurations of Modified SEPIC Converter with Switched Inductor Module (MSCsI) for Photovoltaic Application

T2 - 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2018

AU - Maroti, Pandav Kiran

AU - Padmanaban, Sanjeevikumar

AU - Ionel, Dan M.

AU - Siano, Pierluigi

AU - Leonowicz, Zbigniew

PY - 2018/6

Y1 - 2018/6

N2 - The proposed work is extended configurations of Modified SEPIC Converter (MSC) and Modified SEPIC Converter with Switched Module (MSC SI ). The proposed three configurations are derived by replacing two inductor of MSC by two Switched Inductor (SI) modules, namely Modified SEPIC Converter with XYL configuration (MSC SI -XYL), Modified SEPIC Converter with LYZ configuration (MSC SI -LYZ) and Modified SEPIC Converter with XLZ configuration (MSC SI -XLZ) to improve or increase the overall gain of the converter. The key feature of proposed configuration is: (i) single switch topologies, (ii) no reverse current flow from load to source due to large inductor at the input side, (iii) high voltage conversion ratio. The detailed analysis of three configurations is done in terms of component count, voltage conversion ratio and efficiency. The mathematical analysis and simulation results validates the functionality of three configurations.

AB - The proposed work is extended configurations of Modified SEPIC Converter (MSC) and Modified SEPIC Converter with Switched Module (MSC SI ). The proposed three configurations are derived by replacing two inductor of MSC by two Switched Inductor (SI) modules, namely Modified SEPIC Converter with XYL configuration (MSC SI -XYL), Modified SEPIC Converter with LYZ configuration (MSC SI -LYZ) and Modified SEPIC Converter with XLZ configuration (MSC SI -XLZ) to improve or increase the overall gain of the converter. The key feature of proposed configuration is: (i) single switch topologies, (ii) no reverse current flow from load to source due to large inductor at the input side, (iii) high voltage conversion ratio. The detailed analysis of three configurations is done in terms of component count, voltage conversion ratio and efficiency. The mathematical analysis and simulation results validates the functionality of three configurations.

KW - High Gain DC-DC Converter

KW - Modified SEPIC Converter

KW - Photovoltaic Application

KW - Switched Inductor

UR - http://www.scopus.com/inward/record.url?scp=85056492226&partnerID=8YFLogxK

U2 - 10.1109/EEEIC.2018.8493845

DO - 10.1109/EEEIC.2018.8493845

M3 - Article in proceeding

AN - SCOPUS:85056492226

SN - 978-1-5386-5187-2

BT - Proceedings of the 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2018

PB - IEEE Press

Y2 - 12 June 2018 through 15 June 2018

ER -

Maroti PK, Padmanaban S, Ionel DM, Siano P, Leonowicz Z. Configurations of Modified SEPIC Converter with Switched Inductor Module (MSC_sI) for Photovoltaic Application: Part-II. I Proceedings of the 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2018. IEEE Press. 2018. 8493845 doi: 10.1109/EEEIC.2018.8493845