Control and Modeling of Push-Pull Forward Three-Level Converter for Microgrid

Zhilei Yao; Jing Xu; Josep M. Guerrero

doi:10.1109/OPTIM.2015.7427004

Control and Modeling of Push-Pull Forward Three-Level Converter for Microgrid

AAU Energi

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

1 Citationer (Scopus)

1106 Downloads (Pure)

Abstract

Renewable energy sources are widely used in microgrid. Output voltage of them is often low and varies widely. Because diodes in three-level legs in traditional three-level (TL) converter are substituted by MOSFETs, the push-pull forward (PPF) TL converter is very suitable for wide and low inputvoltage applications. It can operate at two-level and three-level modes. Modeling of the proposed converter is established. Control of the proposed converter is designed, which contains output voltage loop and current limit loop. In addition, control block diagrams of both modes can be simplified to one control diagram. By adding input voltage feedforward, influences of input voltage on output voltage and inductor current can be eliminated. The divider in the input voltage feedforward is simplified by two piecewise linear functions, which can be easily implemented by operational amplifiers. Therefore, cost can be reduced. Simulation results of a 1-kW PPF TL converter verify the theoretical analysis.

Originalsprog	Engelsk
Titel	Proceedings of the 2015 Aegean Conference Electrical Machines and Power Electronics ACEMP
Redaktører	H. Bulent Ertan
Antal sider	7
Forlag	IEEE Press
Publikationsdato	sep. 2015
Sider	455 - 461
ISBN (Trykt)	978-1-4763-7239-8
DOI	https://doi.org/10.1109/OPTIM.2015.7427004
Status	Udgivet - sep. 2015
Begivenhed	Aegean Conference Electrical Machines and Power Electronics - Ankara, Tyrkiet Varighed: 2 sep. 2015 → 4 sep. 2015

Konference

Konference	Aegean Conference Electrical Machines and Power Electronics
Land/Område	Tyrkiet
By	Ankara
Periode	02/09/2015 → 04/09/2015

Adgang til dokumentet

10.1109/OPTIM.2015.7427004

Control and Modeling of Push-Pull Forward Three-Level Converter for MicrogridIndsendt manuskript, 345 KB

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

@inproceedings{5f58125dadaa4254942ef432ccd8cac8,

title = "Control and Modeling of Push-Pull Forward Three-Level Converter for Microgrid",

abstract = "Renewable energy sources are widely used in microgrid. Output voltage of them is often low and varies widely. Because diodes in three-level legs in traditional three-level (TL) converter are substituted by MOSFETs, the push-pull forward (PPF) TL converter is very suitable for wide and low inputvoltage applications. It can operate at two-level and three-level modes. Modeling of the proposed converter is established. Control of the proposed converter is designed, which contains output voltage loop and current limit loop. In addition, control block diagrams of both modes can be simplified to one control diagram. By adding input voltage feedforward, influences of input voltage on output voltage and inductor current can be eliminated. The divider in the input voltage feedforward is simplified by two piecewise linear functions, which can be easily implemented by operational amplifiers. Therefore, cost can be reduced. Simulation results of a 1-kW PPF TL converter verify the theoretical analysis.",

keywords = "Three-level converter, DC-DC converter, Three-level mode, Two-level mode, Input voltage feedforward",

author = "Zhilei Yao and Jing Xu and Guerrero, {Josep M.}",

year = "2015",

month = sep,

doi = "10.1109/OPTIM.2015.7427004",

language = "English",

isbn = "978-1-4763-7239-8",

pages = "455 -- 461",

editor = "Ertan, {H. Bulent}",

booktitle = "Proceedings of the 2015 Aegean Conference Electrical Machines and Power Electronics ACEMP",

publisher = "IEEE Press",

note = " Aegean Conference Electrical Machines and Power Electronics, ACEMP ; Conference date: 02-09-2015 Through 04-09-2015",

}

Yao, Z, Xu, J & Guerrero, JM 2015, Control and Modeling of Push-Pull Forward Three-Level Converter for Microgrid. i HB Ertan (red.), Proceedings of the 2015 Aegean Conference Electrical Machines and Power Electronics ACEMP. IEEE Press, s. 455 - 461, Aegean Conference Electrical Machines and Power Electronics, Ankara, Tyrkiet, 02/09/2015. https://doi.org/10.1109/OPTIM.2015.7427004

Control and Modeling of Push-Pull Forward Three-Level Converter for Microgrid. / Yao, Zhilei; Xu, Jing; Guerrero, Josep M.
Proceedings of the 2015 Aegean Conference Electrical Machines and Power Electronics ACEMP. red. / H. Bulent Ertan. IEEE Press, 2015. s. 455 - 461.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Control and Modeling of Push-Pull Forward Three-Level Converter for Microgrid

AU - Yao, Zhilei

AU - Xu, Jing

AU - Guerrero, Josep M.

PY - 2015/9

Y1 - 2015/9

N2 - Renewable energy sources are widely used in microgrid. Output voltage of them is often low and varies widely. Because diodes in three-level legs in traditional three-level (TL) converter are substituted by MOSFETs, the push-pull forward (PPF) TL converter is very suitable for wide and low inputvoltage applications. It can operate at two-level and three-level modes. Modeling of the proposed converter is established. Control of the proposed converter is designed, which contains output voltage loop and current limit loop. In addition, control block diagrams of both modes can be simplified to one control diagram. By adding input voltage feedforward, influences of input voltage on output voltage and inductor current can be eliminated. The divider in the input voltage feedforward is simplified by two piecewise linear functions, which can be easily implemented by operational amplifiers. Therefore, cost can be reduced. Simulation results of a 1-kW PPF TL converter verify the theoretical analysis.

AB - Renewable energy sources are widely used in microgrid. Output voltage of them is often low and varies widely. Because diodes in three-level legs in traditional three-level (TL) converter are substituted by MOSFETs, the push-pull forward (PPF) TL converter is very suitable for wide and low inputvoltage applications. It can operate at two-level and three-level modes. Modeling of the proposed converter is established. Control of the proposed converter is designed, which contains output voltage loop and current limit loop. In addition, control block diagrams of both modes can be simplified to one control diagram. By adding input voltage feedforward, influences of input voltage on output voltage and inductor current can be eliminated. The divider in the input voltage feedforward is simplified by two piecewise linear functions, which can be easily implemented by operational amplifiers. Therefore, cost can be reduced. Simulation results of a 1-kW PPF TL converter verify the theoretical analysis.

KW - Three-level converter

KW - DC-DC converter

KW - Three-level mode

KW - Two-level mode

KW - Input voltage feedforward

U2 - 10.1109/OPTIM.2015.7427004

DO - 10.1109/OPTIM.2015.7427004

M3 - Article in proceeding

SN - 978-1-4763-7239-8

SP - 455

EP - 461

BT - Proceedings of the 2015 Aegean Conference Electrical Machines and Power Electronics ACEMP

A2 - Ertan, H. Bulent

PB - IEEE Press

T2 - Aegean Conference Electrical Machines and Power Electronics

Y2 - 2 September 2015 through 4 September 2015

ER -

Control and Modeling of Push-Pull Forward Three-Level Converter for Microgrid

Abstract

Konference

Adgang til dokumentet

AUB Link

Fingeraftryk

Citationsformater