Control of Permanent Magnet Synchronous Generator for large wind turbines

Cristian Busca; Ana-Irina Stan; Tiberiu Stanciu; Daniel Ioan Stroe

doi:10.1109/ISIE.2010.5637628

Control of Permanent Magnet Synchronous Generator for large wind turbines

Cristian Busca, Ana-Irina Stan, Tiberiu Stanciu, Daniel Ioan Stroe

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

51 Citationer (Scopus)

Abstract

Direct Torque Control (DTC) and Field Oriented Control (FOC) are the most dominant control strategies used in generators for wind turbines. In this paper both control methods were implemented on a Permanent Magnet Synchronous Generator (PMSG). The variable speed wind turbine with full scale power converter topology was chosen for design. Parameters from a 2 MW wind turbine were used for system modeling. All the components of the wind turbine system (WTS), except the DC-link and the grid site converter were implemented in MATLAB/Simulink. The pitch controller was used to limit the output power produced by the turbine. DTC and FOC strategies, using SVM were used to control the generator rotor speed. The performance of the two control strategies were compared after different tests have been carried out.

Originalsprog	Engelsk
Titel	Proceedings of the IEEE International Symposium on Industrial Electronics, ISIE 2010
Antal sider	6
Forlag	IEEE Press
Publikationsdato	2010
Sider	3871-3876
ISBN (Trykt)	978-1-4244-6390-9
DOI	https://doi.org/10.1109/ISIE.2010.5637628
Status	Udgivet - 2010
Begivenhed	2010 IEEE International Symposium on Industrial Electronics, ISIE 2010 - Bari, Italien Varighed: 4 jul. 2010 → 7 jul. 2010

Konference

Konference	2010 IEEE International Symposium on Industrial Electronics, ISIE 2010
Land/Område	Italien
By	Bari
Periode	04/07/2010 → 07/07/2010
Sponsor	The Institute of Electrical and Electronics Engineers (IEEE), IEEE Industrial Electronics Society (IES), IEEE Control Systems Society (CSS), Society of Instrument and Control Engineers (SICE-Japan), Polytechnic University of Bari

Adgang til dokumentet

10.1109/ISIE.2010.5637628

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

@inproceedings{e195a44437fa48ab8a759d3062eeacda,

title = "Control of Permanent Magnet Synchronous Generator for large wind turbines",

abstract = "Direct Torque Control (DTC) and Field Oriented Control (FOC) are the most dominant control strategies used in generators for wind turbines. In this paper both control methods were implemented on a Permanent Magnet Synchronous Generator (PMSG). The variable speed wind turbine with full scale power converter topology was chosen for design. Parameters from a 2 MW wind turbine were used for system modeling. All the components of the wind turbine system (WTS), except the DC-link and the grid site converter were implemented in MATLAB/Simulink. The pitch controller was used to limit the output power produced by the turbine. DTC and FOC strategies, using SVM were used to control the generator rotor speed. The performance of the two control strategies were compared after different tests have been carried out.",

author = "Cristian Busca and Ana-Irina Stan and Tiberiu Stanciu and Stroe, {Daniel Ioan}",

year = "2010",

doi = "10.1109/ISIE.2010.5637628",

language = "English",

isbn = "978-1-4244-6390-9 ",

pages = "3871--3876",

booktitle = "Proceedings of the IEEE International Symposium on Industrial Electronics, ISIE 2010",

publisher = "IEEE Press",

note = "2010 IEEE International Symposium on Industrial Electronics, ISIE 2010 ; Conference date: 04-07-2010 Through 07-07-2010",

}

Busca, C, Stan, A-I, Stanciu, T & Stroe, DI 2010, Control of Permanent Magnet Synchronous Generator for large wind turbines. i Proceedings of the IEEE International Symposium on Industrial Electronics, ISIE 2010 . IEEE Press, s. 3871-3876, 2010 IEEE International Symposium on Industrial Electronics, ISIE 2010, Bari, Italien, 04/07/2010. https://doi.org/10.1109/ISIE.2010.5637628

Control of Permanent Magnet Synchronous Generator for large wind turbines. / Busca, Cristian; Stan, Ana-Irina; Stanciu, Tiberiu et al.
Proceedings of the IEEE International Symposium on Industrial Electronics, ISIE 2010 . IEEE Press, 2010. s. 3871-3876.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Control of Permanent Magnet Synchronous Generator for large wind turbines

AU - Busca, Cristian

AU - Stan, Ana-Irina

AU - Stanciu, Tiberiu

AU - Stroe, Daniel Ioan

PY - 2010

Y1 - 2010

N2 - Direct Torque Control (DTC) and Field Oriented Control (FOC) are the most dominant control strategies used in generators for wind turbines. In this paper both control methods were implemented on a Permanent Magnet Synchronous Generator (PMSG). The variable speed wind turbine with full scale power converter topology was chosen for design. Parameters from a 2 MW wind turbine were used for system modeling. All the components of the wind turbine system (WTS), except the DC-link and the grid site converter were implemented in MATLAB/Simulink. The pitch controller was used to limit the output power produced by the turbine. DTC and FOC strategies, using SVM were used to control the generator rotor speed. The performance of the two control strategies were compared after different tests have been carried out.

AB - Direct Torque Control (DTC) and Field Oriented Control (FOC) are the most dominant control strategies used in generators for wind turbines. In this paper both control methods were implemented on a Permanent Magnet Synchronous Generator (PMSG). The variable speed wind turbine with full scale power converter topology was chosen for design. Parameters from a 2 MW wind turbine were used for system modeling. All the components of the wind turbine system (WTS), except the DC-link and the grid site converter were implemented in MATLAB/Simulink. The pitch controller was used to limit the output power produced by the turbine. DTC and FOC strategies, using SVM were used to control the generator rotor speed. The performance of the two control strategies were compared after different tests have been carried out.

U2 - 10.1109/ISIE.2010.5637628

DO - 10.1109/ISIE.2010.5637628

M3 - Article in proceeding

SN - 978-1-4244-6390-9

SP - 3871

EP - 3876

BT - Proceedings of the IEEE International Symposium on Industrial Electronics, ISIE 2010

PB - IEEE Press

T2 - 2010 IEEE International Symposium on Industrial Electronics, ISIE 2010

Y2 - 4 July 2010 through 7 July 2010

ER -

Control of Permanent Magnet Synchronous Generator for large wind turbines

Abstract

Konference

Adgang til dokumentet

AUB Link

Fingeraftryk

Citationsformater