Demonstrating and Evaluating the Digital Twin Based Virtual Factory for Virtual Prototyping

Emre Yildiz; Charles Møller; Arne Bilberg

doi:10.1007/978-3-030-90700-6_33

Demonstrating and Evaluating the Digital Twin Based Virtual Factory for Virtual Prototyping

Emre Yildiz^*, Charles Møller, Arne Bilberg

^*Kontaktforfatter

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

1 Citationer (Scopus)

Abstract

Virtual prototyping (VP) technologies promise a viable solution to handle challenges in shorter product and production lifecycles and higher complexity. In this paper, we present the demonstration, and preliminary evaluation of the previously introduced digital twin (DT) based virtual factory (VF) concept for VP in the context of new product introduction (NPI) processes. The concept is demonstrated in two cases: blade manufacturing and nacelle assembly operations Vestas Wind Systems A/S. The preliminary evaluation results show that DT based integrated VF simulations provide immersive virtual environments, which allow users to manage complex product and production systems and significant cost savings. Finally, we present and discuss the evaluation of the concept demonstration by industry experts for the proposed solution.

Originalsprog	Engelsk
Titel	Towards Sustainable Customization : Bridging Smart Products and Manufacturing Systems - Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference CARV 2021 and 10th World Mass Customization and Personalization Conference MCPC 2021
Redaktører	Ann-Louise Andersen, Rasmus Andersen, Thomas Ditlev Brunoe, Maria Stoettrup Schioenning Larsen, Kjeld Nielsen, Alessia Napoleone, Stefan Kjeldgaard
Antal sider	8
Forlag	Springer Science+Business Media
Publikationsdato	2022
Sider	297-304
ISBN (Trykt)	9783030906993
DOI	https://doi.org/10.1007/978-3-030-90700-6_33
Status	Udgivet - 2022
Begivenhed	8th Changeable, Agile, Reconfigurable and Virtual Production Conference, CARV 2021 and 10th World Mass Customization and Personalization Conference, MCPC 2021 - Aalborg, Danmark Varighed: 1 nov. 2021 → 2 nov. 2021

Konference

Konference	8th Changeable, Agile, Reconfigurable and Virtual Production Conference, CARV 2021 and 10th World Mass Customization and Personalization Conference, MCPC 2021
Land/Område	Danmark
By	Aalborg
Periode	01/11/2021 → 02/11/2021

Navn	Lecture Notes in Mechanical Engineering
ISSN	2195-4356

Bibliografisk note

Publisher Copyright:
© 2022, Springer Nature Switzerland AG.

Adgang til dokumentet

10.1007/978-3-030-90700-6_33

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Andre filer og links

Link to publication in Scopus

Citationsformater

Yildiz, E., Møller, C., & Bilberg, A. (2022). Demonstrating and Evaluating the Digital Twin Based Virtual Factory for Virtual Prototyping. I A.-L. Andersen, R. Andersen, T. D. Brunoe, M. S. S. Larsen, K. Nielsen, A. Napoleone, & S. Kjeldgaard (red.), Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems - Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference CARV 2021 and 10th World Mass Customization and Personalization Conference MCPC 2021 (s. 297-304). Springer Science+Business Media. https://doi.org/10.1007/978-3-030-90700-6_33

Yildiz, Emre ; Møller, Charles ; Bilberg, Arne. / Demonstrating and Evaluating the Digital Twin Based Virtual Factory for Virtual Prototyping. Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems - Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference CARV 2021 and 10th World Mass Customization and Personalization Conference MCPC 2021. red. / Ann-Louise Andersen ; Rasmus Andersen ; Thomas Ditlev Brunoe ; Maria Stoettrup Schioenning Larsen ; Kjeld Nielsen ; Alessia Napoleone ; Stefan Kjeldgaard. Springer Science+Business Media, 2022. s. 297-304 (Lecture Notes in Mechanical Engineering).

@inproceedings{83a3546eaec443c8a9baea3cb9e84df0,

title = "Demonstrating and Evaluating the Digital Twin Based Virtual Factory for Virtual Prototyping",

abstract = "Virtual prototyping (VP) technologies promise a viable solution to handle challenges in shorter product and production lifecycles and higher complexity. In this paper, we present the demonstration, and preliminary evaluation of the previously introduced digital twin (DT) based virtual factory (VF) concept for VP in the context of new product introduction (NPI) processes. The concept is demonstrated in two cases: blade manufacturing and nacelle assembly operations Vestas Wind Systems A/S. The preliminary evaluation results show that DT based integrated VF simulations provide immersive virtual environments, which allow users to manage complex product and production systems and significant cost savings. Finally, we present and discuss the evaluation of the concept demonstration by industry experts for the proposed solution.",

keywords = "Digital twin, Industry 4.0, Simulation and modelling, Virtual factory, Virtual prototyping, Virtual reality",

author = "Emre Yildiz and Charles M{\o}ller and Arne Bilberg",

note = "Publisher Copyright: {\textcopyright} 2022, Springer Nature Switzerland AG.; 8th Changeable, Agile, Reconfigurable and Virtual Production Conference, CARV 2021 and 10th World Mass Customization and Personalization Conference, MCPC 2021 ; Conference date: 01-11-2021 Through 02-11-2021",

year = "2022",

doi = "10.1007/978-3-030-90700-6_33",

language = "English",

isbn = "9783030906993",

series = "Lecture Notes in Mechanical Engineering",

publisher = "Springer Science+Business Media",

pages = "297--304",

editor = "Ann-Louise Andersen and Rasmus Andersen and Brunoe, {Thomas Ditlev} and Larsen, {Maria Stoettrup Schioenning} and Kjeld Nielsen and Alessia Napoleone and Stefan Kjeldgaard",

booktitle = "Towards Sustainable Customization",

address = "United States",

}

Yildiz, E, Møller, C & Bilberg, A 2022, Demonstrating and Evaluating the Digital Twin Based Virtual Factory for Virtual Prototyping. i A-L Andersen, R Andersen, TD Brunoe, MSS Larsen, K Nielsen, A Napoleone & S Kjeldgaard (red), Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems - Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference CARV 2021 and 10th World Mass Customization and Personalization Conference MCPC 2021. Springer Science+Business Media, Lecture Notes in Mechanical Engineering, s. 297-304, 8th Changeable, Agile, Reconfigurable and Virtual Production Conference, CARV 2021 and 10th World Mass Customization and Personalization Conference, MCPC 2021, Aalborg, Danmark, 01/11/2021. https://doi.org/10.1007/978-3-030-90700-6_33

Demonstrating and Evaluating the Digital Twin Based Virtual Factory for Virtual Prototyping. / Yildiz, Emre; Møller, Charles; Bilberg, Arne.
Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems - Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference CARV 2021 and 10th World Mass Customization and Personalization Conference MCPC 2021. red. / Ann-Louise Andersen; Rasmus Andersen; Thomas Ditlev Brunoe; Maria Stoettrup Schioenning Larsen; Kjeld Nielsen; Alessia Napoleone; Stefan Kjeldgaard. Springer Science+Business Media, 2022. s. 297-304 (Lecture Notes in Mechanical Engineering).

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Demonstrating and Evaluating the Digital Twin Based Virtual Factory for Virtual Prototyping

AU - Yildiz, Emre

AU - Møller, Charles

AU - Bilberg, Arne

PY - 2022

Y1 - 2022

N2 - Virtual prototyping (VP) technologies promise a viable solution to handle challenges in shorter product and production lifecycles and higher complexity. In this paper, we present the demonstration, and preliminary evaluation of the previously introduced digital twin (DT) based virtual factory (VF) concept for VP in the context of new product introduction (NPI) processes. The concept is demonstrated in two cases: blade manufacturing and nacelle assembly operations Vestas Wind Systems A/S. The preliminary evaluation results show that DT based integrated VF simulations provide immersive virtual environments, which allow users to manage complex product and production systems and significant cost savings. Finally, we present and discuss the evaluation of the concept demonstration by industry experts for the proposed solution.

AB - Virtual prototyping (VP) technologies promise a viable solution to handle challenges in shorter product and production lifecycles and higher complexity. In this paper, we present the demonstration, and preliminary evaluation of the previously introduced digital twin (DT) based virtual factory (VF) concept for VP in the context of new product introduction (NPI) processes. The concept is demonstrated in two cases: blade manufacturing and nacelle assembly operations Vestas Wind Systems A/S. The preliminary evaluation results show that DT based integrated VF simulations provide immersive virtual environments, which allow users to manage complex product and production systems and significant cost savings. Finally, we present and discuss the evaluation of the concept demonstration by industry experts for the proposed solution.

KW - Digital twin

KW - Industry 4.0

KW - Simulation and modelling

KW - Virtual factory

KW - Virtual prototyping

KW - Virtual reality

UR - http://www.scopus.com/inward/record.url?scp=85119398815&partnerID=8YFLogxK

U2 - 10.1007/978-3-030-90700-6_33

DO - 10.1007/978-3-030-90700-6_33

M3 - Article in proceeding

AN - SCOPUS:85119398815

SN - 9783030906993

T3 - Lecture Notes in Mechanical Engineering

SP - 297

EP - 304

BT - Towards Sustainable Customization

A2 - Andersen, Ann-Louise

A2 - Andersen, Rasmus

A2 - Brunoe, Thomas Ditlev

A2 - Larsen, Maria Stoettrup Schioenning

A2 - Nielsen, Kjeld

A2 - Napoleone, Alessia

A2 - Kjeldgaard, Stefan

PB - Springer Science+Business Media

T2 - 8th Changeable, Agile, Reconfigurable and Virtual Production Conference, CARV 2021 and 10th World Mass Customization and Personalization Conference, MCPC 2021

Y2 - 1 November 2021 through 2 November 2021

ER -

Yildiz E, Møller C, Bilberg A. Demonstrating and Evaluating the Digital Twin Based Virtual Factory for Virtual Prototyping. I Andersen AL, Andersen R, Brunoe TD, Larsen MSS, Nielsen K, Napoleone A, Kjeldgaard S, red., Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems - Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference CARV 2021 and 10th World Mass Customization and Personalization Conference MCPC 2021. Springer Science+Business Media. 2022. s. 297-304. (Lecture Notes in Mechanical Engineering). doi: 10.1007/978-3-030-90700-6_33

Demonstrating and Evaluating the Digital Twin Based Virtual Factory for Virtual Prototyping

Abstract

Konference

Bibliografisk note

Adgang til dokumentet

AUB Link

Andre filer og links

Fingeraftryk

Citationsformater