TY - JOUR
T1 - Design and Implementation of Seventeen Level Inverter With Reduced Components
AU - Chittathuru, Dhanamjayulu
AU - Prasad, Devalraju
AU - Sanjeevikumar, Padmanaban
AU - Maroti, Pandav Kiran
AU - Holm-Nielsen, Jens Bo
AU - Blaabjerg, Frede
PY - 2021/1
Y1 - 2021/1
N2 - The multilevel inverters (MLI) are resourceful in producing a voltage waveform with superior-quality staircase counterfeit sinusoidal and depressed harmonic distortion (THD). Several conventional topologies are proposed to realize the MLI however, the limitations of these topologies may involve more DC sources and power-switching devices, and less THD, which in turn, increases the cost and size of the inverter. These drawbacks can be eliminated with the proposed hybrid Cascaded H-Bridge Multilevel Inverter with reduced components topology. As compared with the established MLI topologies the recommended topology having a reduced number of DC sources, power-switching devices, component count level factor, lesser TSV, more efficient, lesser THD, and cost-effective. The proposed MLI is a blend of a single-phase T-Type inverter and an H-Bridge module made of sub switches. This article incorporates the design and simulation of the multilevel inverter with staircase PWM technique. Further, the 9-level and 17-level MLI is examined with different combinational loads. The proposed inverter is stable during nonlinear loads, and it is well suited for FACTS and renewable energy grid-connected applications. An operational guideline has been explained with correct figures and tables. The Output voltage wave is realized in numerical simulation. Finally, the experimental demonstrations were performed by implementing a hardware prototype setup for both linear and nonlinear loads using the dSPACE controller laboratory.
AB - The multilevel inverters (MLI) are resourceful in producing a voltage waveform with superior-quality staircase counterfeit sinusoidal and depressed harmonic distortion (THD). Several conventional topologies are proposed to realize the MLI however, the limitations of these topologies may involve more DC sources and power-switching devices, and less THD, which in turn, increases the cost and size of the inverter. These drawbacks can be eliminated with the proposed hybrid Cascaded H-Bridge Multilevel Inverter with reduced components topology. As compared with the established MLI topologies the recommended topology having a reduced number of DC sources, power-switching devices, component count level factor, lesser TSV, more efficient, lesser THD, and cost-effective. The proposed MLI is a blend of a single-phase T-Type inverter and an H-Bridge module made of sub switches. This article incorporates the design and simulation of the multilevel inverter with staircase PWM technique. Further, the 9-level and 17-level MLI is examined with different combinational loads. The proposed inverter is stable during nonlinear loads, and it is well suited for FACTS and renewable energy grid-connected applications. An operational guideline has been explained with correct figures and tables. The Output voltage wave is realized in numerical simulation. Finally, the experimental demonstrations were performed by implementing a hardware prototype setup for both linear and nonlinear loads using the dSPACE controller laboratory.
KW - Hybrid cascaded H-bridge multilevel inverter with reduced components
KW - pulse width modulation (PWM)
KW - total harmonics distortion (THD)
U2 - 10.1109/ACCESS.2021.3054001
DO - 10.1109/ACCESS.2021.3054001
M3 - Journal article
SN - 2169-3536
VL - 9
SP - 16746
EP - 16760
JO - IEEE Access
JF - IEEE Access
M1 - 9334980
ER -