Design of a double layer cavity backed slot array antenna in gap waveguide technology

Peiye Liu; Ashraf Zaman; Per-Simon Kildal

Design of a double layer cavity backed slot array antenna in gap waveguide technology

Peiye Liu, Ashraf Zaman, Per-Simon Kildal

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

Abstract

In this paper a double layer cavity backed slot array antenna at K band is presented. The slot antenna is built using ridge gap waveguide feed network and gap waveguide cavity layer. These antenna blocks are manufactured without the requirements of electrical contact between the metal plates The corporate-feed network is realized by a texture of pins and a guiding ridge in the bottom plate. The 4×4 slot array antenna has been fabricated and measured. The measured reflection coefficient remains below -11dB with reasonably good radiation patterns over the band of interest from 18.2 GHz to 21.2 GHz.

Originalsprog	Engelsk
Titel	Design of a double layer cavity backed slot array antenna in gap waveguide technology
Antal sider	2
Forlag	IEEE (Institute of Electrical and Electronics Engineers)
Publikationsdato	okt. 2016
Sider	682-683
Status	Udgivet - okt. 2016
Begivenhed	2016 International Symposium on Antennas and Propagation (ISAP), Japn - Okinawa, Japan Varighed: 24 okt. 2016 → 28 okt. 2016 http://ieeexplore.ieee.org/xpl/mostRecentIssue.jsp?punumber=7794367

Konference

Konference	2016 International Symposium on Antennas and Propagation (ISAP), Japn
Land/Område	Japan
By	Okinawa
Periode	24/10/2016 → 28/10/2016
Internetadresse	http://ieeexplore.ieee.org/xpl/mostRecentIssue.jsp?punumber=7794367

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

@inproceedings{b15ecc7b9ab74010a647ed195dfa7122,

title = "Design of a double layer cavity backed slot array antenna in gap waveguide technology",

abstract = "In this paper a double layer cavity backed slot array antenna at K band is presented. The slot antenna is built using ridge gap waveguide feed network and gap waveguide cavity layer. These antenna blocks are manufactured without the requirements of electrical contact between the metal plates The corporate-feed network is realized by a texture of pins and a guiding ridge in the bottom plate. The 4×4 slot array antenna has been fabricated and measured. The measured reflection coefficient remains below -11dB with reasonably good radiation patterns over the band of interest from 18.2 GHz to 21.2 GHz.",

keywords = "slot arrya antenna, double layer, gap waveguide",

author = "Peiye Liu and Ashraf Zaman and Per-Simon Kildal",

year = "2016",

month = oct,

language = "English",

pages = "682--683",

booktitle = "Design of a double layer cavity backed slot array antenna in gap waveguide technology",

publisher = "IEEE (Institute of Electrical and Electronics Engineers)",

address = "United States",

note = "2016 International Symposium on Antennas and Propagation (ISAP), Japn ; Conference date: 24-10-2016 Through 28-10-2016",

url = "http://ieeexplore.ieee.org/xpl/mostRecentIssue.jsp?punumber=7794367",

}

Liu, P, Zaman, A & Kildal, P-S 2016, Design of a double layer cavity backed slot array antenna in gap waveguide technology. i Design of a double layer cavity backed slot array antenna in gap waveguide technology. IEEE (Institute of Electrical and Electronics Engineers), s. 682-683, 2016 International Symposium on Antennas and Propagation (ISAP), Japn , Okinawa, Japan, 24/10/2016.

Design of a double layer cavity backed slot array antenna in gap waveguide technology. / Liu, Peiye; Zaman, Ashraf; Kildal, Per-Simon.
Design of a double layer cavity backed slot array antenna in gap waveguide technology. IEEE (Institute of Electrical and Electronics Engineers), 2016. s. 682-683.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Design of a double layer cavity backed slot array antenna in gap waveguide technology

AU - Liu, Peiye

AU - Zaman, Ashraf

AU - Kildal, Per-Simon

PY - 2016/10

Y1 - 2016/10

N2 - In this paper a double layer cavity backed slot array antenna at K band is presented. The slot antenna is built using ridge gap waveguide feed network and gap waveguide cavity layer. These antenna blocks are manufactured without the requirements of electrical contact between the metal plates The corporate-feed network is realized by a texture of pins and a guiding ridge in the bottom plate. The 4×4 slot array antenna has been fabricated and measured. The measured reflection coefficient remains below -11dB with reasonably good radiation patterns over the band of interest from 18.2 GHz to 21.2 GHz.

AB - In this paper a double layer cavity backed slot array antenna at K band is presented. The slot antenna is built using ridge gap waveguide feed network and gap waveguide cavity layer. These antenna blocks are manufactured without the requirements of electrical contact between the metal plates The corporate-feed network is realized by a texture of pins and a guiding ridge in the bottom plate. The 4×4 slot array antenna has been fabricated and measured. The measured reflection coefficient remains below -11dB with reasonably good radiation patterns over the band of interest from 18.2 GHz to 21.2 GHz.

KW - slot arrya antenna

KW - double layer

KW - gap waveguide

M3 - Article in proceeding

SP - 682

EP - 683

BT - Design of a double layer cavity backed slot array antenna in gap waveguide technology

PB - IEEE (Institute of Electrical and Electronics Engineers)

T2 - 2016 International Symposium on Antennas and Propagation (ISAP), Japn

Y2 - 24 October 2016 through 28 October 2016

ER -

Design of a double layer cavity backed slot array antenna in gap waveguide technology

Abstract

Konference

AUB Link

Fingeraftryk

Citationsformater