Dynamic Double Curvature Mould System

Christian Raun Jepsen; Mathias Kræmmergaard Kristensen; Poul Henning Kirkegaard

doi:10.1007/978-3-642-23435-4

Dynamic Double Curvature Mould System

Christian Raun Jepsen, Mathias Kræmmergaard Kristensen, Poul Henning Kirkegaard

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

Abstract

The present paper describes a concept for a reconfigurable mould surface which is designed to fit the needs of contemporary architecture. The core of the concept presented is a dynamic surface manipulated into a given shape using a digital signal created directly from the CAD drawing of the design. This happens fast, automatic and without production of waste, and the manipulated surface is fair and robust, eliminating the need for additional, manual treatment. Limitations to the possibilities of the flexible form are limited curvature and limited level of detail, making it especially suited for larger, double curved surfaces like facedes or walls, where the curvature of each element is relatively small in comparison to the overall shape.

Originalsprog	Engelsk
Titel	Computational Design Modeling : Proceedings of the Design Modeling Symposium, Berlin 2011
Redaktører	Christoph Gengnagel, Axel Kilian, Norbert Palz, Fabian Scheurer
Antal sider	10
Forlag	Springer
Publikationsdato	2011
Sider	291-300
ISBN (Trykt)	978-3-642-23435-7
ISBN (Elektronisk)	978-3-642-23435-4
DOI	https://doi.org/10.1007/978-3-642-23435-4
Status	Udgivet - 2011
Begivenhed	Design Modeling Symposium, Berlin 2011 - Berlin, Tyskland Varighed: 10 okt. 2011 → 12 okt. 2011 Konferencens nummer: 3

Konference

Konference	Design Modeling Symposium, Berlin 2011
Nummer	3
Land/Område	Tyskland
By	Berlin
Periode	10/10/2011 → 12/10/2011

Adgang til dokumentet

10.1007/978-3-642-23435-4

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

@inproceedings{21b6ab63692c46bebb919d07f5342ead,

title = "Dynamic Double Curvature Mould System",

abstract = "The present paper describes a concept for a reconfigurable mould surface which is designed to fit the needs of contemporary architecture. The core of the concept presented is a dynamic surface manipulated into a given shape using a digital signal created directly from the CAD drawing of the design. This happens fast, automatic and without production of waste, and the manipulated surface is fair and robust, eliminating the need for additional, manual treatment. Limitations to the possibilities of the flexible form are limited curvature and limited level of detail, making it especially suited for larger, double curved surfaces like facedes or walls, where the curvature of each element is relatively small in comparison to the overall shape.",

author = "Jepsen, {Christian Raun} and Kristensen, {Mathias Kr{\ae}mmergaard} and Kirkegaard, {Poul Henning}",

year = "2011",

doi = "10.1007/978-3-642-23435-4",

language = "English",

isbn = "978-3-642-23435-7",

pages = "291--300",

editor = "Christoph Gengnagel and Kilian, {Axel } and Palz, {Norbert } and Fabian Scheurer",

booktitle = "Computational Design Modeling",

publisher = "Springer",

address = "Germany",

note = "Design Modeling Symposium, Berlin 2011 ; Conference date: 10-10-2011 Through 12-10-2011",

}

Dynamic Double Curvature Mould System. / Jepsen, Christian Raun; Kristensen, Mathias Kræmmergaard; Kirkegaard, Poul Henning.
Computational Design Modeling: Proceedings of the Design Modeling Symposium, Berlin 2011. red. / Christoph Gengnagel; Axel Kilian; Norbert Palz; Fabian Scheurer. Springer, 2011. s. 291-300.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Dynamic Double Curvature Mould System

AU - Jepsen, Christian Raun

AU - Kristensen, Mathias Kræmmergaard

AU - Kirkegaard, Poul Henning

N1 - Conference code: 3

PY - 2011

Y1 - 2011

N2 - The present paper describes a concept for a reconfigurable mould surface which is designed to fit the needs of contemporary architecture. The core of the concept presented is a dynamic surface manipulated into a given shape using a digital signal created directly from the CAD drawing of the design. This happens fast, automatic and without production of waste, and the manipulated surface is fair and robust, eliminating the need for additional, manual treatment. Limitations to the possibilities of the flexible form are limited curvature and limited level of detail, making it especially suited for larger, double curved surfaces like facedes or walls, where the curvature of each element is relatively small in comparison to the overall shape.

AB - The present paper describes a concept for a reconfigurable mould surface which is designed to fit the needs of contemporary architecture. The core of the concept presented is a dynamic surface manipulated into a given shape using a digital signal created directly from the CAD drawing of the design. This happens fast, automatic and without production of waste, and the manipulated surface is fair and robust, eliminating the need for additional, manual treatment. Limitations to the possibilities of the flexible form are limited curvature and limited level of detail, making it especially suited for larger, double curved surfaces like facedes or walls, where the curvature of each element is relatively small in comparison to the overall shape.

U2 - 10.1007/978-3-642-23435-4

DO - 10.1007/978-3-642-23435-4

M3 - Article in proceeding

SN - 978-3-642-23435-7

SP - 291

EP - 300

BT - Computational Design Modeling

A2 - Gengnagel, Christoph

A2 - Kilian, Axel

A2 - Palz, Norbert

A2 - Scheurer, Fabian

PB - Springer

T2 - Design Modeling Symposium, Berlin 2011

Y2 - 10 October 2011 through 12 October 2011

ER -