Abstract

Evaluations of different technologies and solutions for indoor localization exist but only a few are aimed at the industrial context. In this paper, we compare and analyze two prominent solutions based on Ultra Wide Band Radio (Pozyx) and Ultrasound (GoT), both installed in an industrial manufacturing laboratory. The comparison comprises a static and a dynamic case. The static case evaluates average localization errors over 90 s intervals for 100 ground-truth points at three different heights, corresponding to different relevant objects in an industrial environment: mobile robots, pallets, forklifts and worker helmets. The average error obtained across the laboratory is similar for both systems and is between 0.3 m and 0.6 m, with higher errors for low altitudes. The dynamic case is performed with a mobile robot travelling with an average speed of 0.5 m/s at a height of 0.3 m. In this case, low frequency error components are filtered out to focus the comparison on dynamic errors. Average dynamic errors are within 0.3–0.4 m for Pozyx and within 0.1–0.2 m for GoT. Results show an acceptable accuracy required for tracking people or objects and could serve as a guideline for the least achievable accuracy when applied for mobile robotics in conjunction with other elements of a robotic navigation stack.

OriginalsprogEngelsk
Artikelnummer2927
TidsskriftSensors
Vol/bind22
Udgave nummer8
ISSN1424-8220
DOI
StatusUdgivet - 1 apr. 2022

Bibliografisk note

Publisher Copyright:
© 2022 by the authors. Licensee MDPI, Basel, Switzerland.

Fingeraftryk

Dyk ned i forskningsemnerne om 'Evaluation and Comparison of Ultrasonic and UWB Technology for Indoor Localization in an Industrial Environment'. Sammen danner de et unikt fingeraftryk.

Citationsformater