282 Downloads (Pure)

Resumé

Frequent discussions of double skin façade energy performance have started a dialogue about the methods, models and tools for simulation of double façade systems and reliability of their results. Their reliability will increase with empirical validation of the software. Detailed experimental work was carried out in a full scale test facility ‘The Cube’, in order to compile three sets of high quality experimental data for validation purposes. The data sets are available for preheating mode, external air curtain mode and transparent insulation mode. The objective of this article is to provide the reader with all information about the experimental data and measurements, necessary to complete an independent empirical validation of any simulation tool. The article includes detailed information about the experimental apparatus, experimental principles and experimental full-scale test facility ‘The Cube’. This covers such problem areas as measurements of naturally induced air flow, measurements of air temperature under direct solar radiation exposure, etc. Finally, in order to create a solid foundation for software validation, the uncertainty and limitations in the experimental results are discussed. In part II of this paper the reader will be introduced to the experimental results, and their analysis
OriginalsprogEngelsk
Udgivelses stedAalborg
ForlagDepartment of Civil Engineering, Aalborg University
Antal sider23
StatusUdgivet - 2014
NavnDCE Technical Memorandum
Nummer38
ISSN1901-7278

Fingerprint

Air curtains
Facades
Test facilities
Skin
Boundary conditions
Preheating
Flow measurement
Air
Solar radiation
Insulation
Temperature

Emneord

  • Full-scale measurement
  • Natural ventilation
  • Air velocity
  • Velocity profile
  • Air temperature
  • Temperature profiles
  • Mass flow rate
  • Cooling and heating load
  • Solar radiation
  • Wind speed
  • Tracer gas

Citer dette

Larsen, O. K., Heiselberg, P., & Jensen, R. L. (2014). Experimental data and boundary conditions for a Double-Skin Facade building in external air curtain mode. Aalborg: Department of Civil Engineering, Aalborg University. DCE Technical Memorandum, Nr. 38
Larsen, Olena Kalyanova ; Heiselberg, Per ; Jensen, Rasmus Lund. / Experimental data and boundary conditions for a Double-Skin Facade building in external air curtain mode. Aalborg : Department of Civil Engineering, Aalborg University, 2014. 23 s. (DCE Technical Memorandum; Nr. 38).
@book{c122aae61b4b4fa39debfbb2a99fd1ba,
title = "Experimental data and boundary conditions for a Double-Skin Facade building in external air curtain mode",
abstract = "Frequent discussions of double skin fa{\cc}ade energy performance have started a dialogue about the methods, models and tools for simulation of double fa{\cc}ade systems and reliability of their results. Their reliability will increase with empirical validation of the software. Detailed experimental work was carried out in a full scale test facility ‘The Cube’, in order to compile three sets of high quality experimental data for validation purposes. The data sets are available for preheating mode, external air curtain mode and transparent insulation mode. The objective of this article is to provide the reader with all information about the experimental data and measurements, necessary to complete an independent empirical validation of any simulation tool. The article includes detailed information about the experimental apparatus, experimental principles and experimental full-scale test facility ‘The Cube’. This covers such problem areas as measurements of naturally induced air flow, measurements of air temperature under direct solar radiation exposure, etc. Finally, in order to create a solid foundation for software validation, the uncertainty and limitations in the experimental results are discussed. In part II of this paper the reader will be introduced to the experimental results, and their analysis",
keywords = "Full-scale measurement, Natural ventilation, Air velocity, Velocity profile, Air temperature, Temperature profiles, Mass flow rate, Cooling and heating load, Solar radiation, Wind speed, Tracer gas , Full-scale measurement, Natural ventilation, Air velocity, Velocity profile, Air temperature, Temperature profiles, Mass flow rate, Cooling and heating load, Solar radiation, Wind speed, Tracer gas",
author = "Larsen, {Olena Kalyanova} and Per Heiselberg and Jensen, {Rasmus Lund}",
year = "2014",
language = "English",
series = "DCE Technical Memorandum",
publisher = "Department of Civil Engineering, Aalborg University",
number = "38",
address = "Denmark",

}

Larsen, OK, Heiselberg, P & Jensen, RL 2014, Experimental data and boundary conditions for a Double-Skin Facade building in external air curtain mode. DCE Technical Memorandum, nr. 38, Department of Civil Engineering, Aalborg University, Aalborg.

Experimental data and boundary conditions for a Double-Skin Facade building in external air curtain mode. / Larsen, Olena Kalyanova; Heiselberg, Per; Jensen, Rasmus Lund.

Aalborg : Department of Civil Engineering, Aalborg University, 2014. 23 s. (DCE Technical Memorandum; Nr. 38).

Publikation: Bog/antologi/afhandling/rapportRapportForskning

TY - RPRT

T1 - Experimental data and boundary conditions for a Double-Skin Facade building in external air curtain mode

AU - Larsen, Olena Kalyanova

AU - Heiselberg, Per

AU - Jensen, Rasmus Lund

PY - 2014

Y1 - 2014

N2 - Frequent discussions of double skin façade energy performance have started a dialogue about the methods, models and tools for simulation of double façade systems and reliability of their results. Their reliability will increase with empirical validation of the software. Detailed experimental work was carried out in a full scale test facility ‘The Cube’, in order to compile three sets of high quality experimental data for validation purposes. The data sets are available for preheating mode, external air curtain mode and transparent insulation mode. The objective of this article is to provide the reader with all information about the experimental data and measurements, necessary to complete an independent empirical validation of any simulation tool. The article includes detailed information about the experimental apparatus, experimental principles and experimental full-scale test facility ‘The Cube’. This covers such problem areas as measurements of naturally induced air flow, measurements of air temperature under direct solar radiation exposure, etc. Finally, in order to create a solid foundation for software validation, the uncertainty and limitations in the experimental results are discussed. In part II of this paper the reader will be introduced to the experimental results, and their analysis

AB - Frequent discussions of double skin façade energy performance have started a dialogue about the methods, models and tools for simulation of double façade systems and reliability of their results. Their reliability will increase with empirical validation of the software. Detailed experimental work was carried out in a full scale test facility ‘The Cube’, in order to compile three sets of high quality experimental data for validation purposes. The data sets are available for preheating mode, external air curtain mode and transparent insulation mode. The objective of this article is to provide the reader with all information about the experimental data and measurements, necessary to complete an independent empirical validation of any simulation tool. The article includes detailed information about the experimental apparatus, experimental principles and experimental full-scale test facility ‘The Cube’. This covers such problem areas as measurements of naturally induced air flow, measurements of air temperature under direct solar radiation exposure, etc. Finally, in order to create a solid foundation for software validation, the uncertainty and limitations in the experimental results are discussed. In part II of this paper the reader will be introduced to the experimental results, and their analysis

KW - Full-scale measurement

KW - Natural ventilation

KW - Air velocity

KW - Velocity profile

KW - Air temperature

KW - Temperature profiles

KW - Mass flow rate

KW - Cooling and heating load

KW - Solar radiation

KW - Wind speed

KW - Tracer gas

KW - Full-scale measurement

KW - Natural ventilation

KW - Air velocity

KW - Velocity profile

KW - Air temperature

KW - Temperature profiles

KW - Mass flow rate

KW - Cooling and heating load

KW - Solar radiation

KW - Wind speed

KW - Tracer gas

M3 - Report

T3 - DCE Technical Memorandum

BT - Experimental data and boundary conditions for a Double-Skin Facade building in external air curtain mode

PB - Department of Civil Engineering, Aalborg University

CY - Aalborg

ER -

Larsen OK, Heiselberg P, Jensen RL. Experimental data and boundary conditions for a Double-Skin Facade building in external air curtain mode. Aalborg: Department of Civil Engineering, Aalborg University, 2014. 23 s. (DCE Technical Memorandum; Nr. 38).