Fault Analysis for Protection Purposes in Maritime Applications

Catalin-Iosif Ciontea; Claus Leth Bak; Frede Blaabjerg; Kjeld Kilsgaard Madsen; Claes Høll Sterregaard

doi:10.1049/cp.2016.0084

Fault Analysis for Protection Purposes in Maritime Applications

Catalin-Iosif Ciontea, Claus Leth Bak, Frede Blaabjerg, Kjeld Kilsgaard Madsen, Claes Høll Sterregaard

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

1 Citationer (Scopus)

329 Downloads (Pure)

Abstrakt

The method of symmetrical components simplifies analysis of a three-phase network and provides information regarding the existance of a fault in the system. This concept is applied to a radial power system in the maritime sector. A fault analysis is performed for the main types of faults, applied in different locations of the network. The fault current is measured using the curent transformers that are already present in the system as part of a time-inverse overcurrent protection. Simulation results show that the symmetrical components of the currents seen by these current transformers can be used to detect the electric fault. The method also provides an improved fault detection over the conventional overcurrent relays in some situations. All results are obtain using MATLAB/Simulink and are briefly discussed in this paper.

Originalsprog	Engelsk
Titel	Proccedings of the 13th IET International Conference on Developments in Power System Protection (DPSP), 2016
Antal sider	6
Forlag	Institution of Engineering and Technology
Publikationsdato	mar. 2016
Sider	1 - 6
ISBN (Trykt)	978-1-78561-138-4
ISBN (Elektronisk)	978-1-78561-139-1
DOI	https://doi.org/10.1049/cp.2016.0084
Status	Udgivet - mar. 2016
Begivenhed	The 13th International Conference on Developments in Power System Protection - The Sheraton Hotel, Edinburgh, Storbritannien Varighed: 7 mar. 2016 → 10 mar. 2016 Konferencens nummer: 13 http://conferences.theiet.org/dpsp/

Konference

Konference	The 13th International Conference on Developments in Power System Protection
Nummer	13
Lokation	The Sheraton Hotel
Land	Storbritannien
By	Edinburgh
Periode	07/03/2016 → 10/03/2016
Internetadresse	http://conferences.theiet.org/dpsp/

Adgang til dokumentet

10.1049/cp.2016.0084

Fault Analysis for Protection Purposes in Maritime ApplicationsIndsendt manuskript, 705 KB

http://ieeexplore.ieee.org/document/7795074/

Fingeraftryk Dyk ned i forskningsemnerne om 'Fault Analysis for Protection Purposes in Maritime Applications'. Sammen danner de et unikt fingeraftryk.

Citationsformater

@inproceedings{450cb990c32a46efa3de973cf9a58827,

title = "Fault Analysis for Protection Purposes in Maritime Applications",

abstract = "The method of symmetrical components simplifies analysis of a three-phase network and provides information regarding the existance of a fault in the system. This concept is applied to a radial power system in the maritime sector. A fault analysis is performed for the main types of faults, applied in different locations of the network. The fault current is measured using the curent transformers that are already present in the system as part of a time-inverse overcurrent protection. Simulation results show that the symmetrical components of the currents seen by these current transformers can be used to detect the electric fault. The method also provides an improved fault detection over the conventional overcurrent relays in some situations. All results are obtain using MATLAB/Simulink and are briefly discussed in this paper.",

keywords = "Maritime network, Fault current, Overcurrent protection, Current transformer, Symmetrical components",

author = "Catalin-Iosif Ciontea and Bak, {Claus Leth} and Frede Blaabjerg and Madsen, {Kjeld Kilsgaard} and Sterregaard, {Claes H{\o}ll}",

year = "2016",

month = mar,

doi = "10.1049/cp.2016.0084",

language = "English",

isbn = "978-1-78561-138-4",

pages = "1 -- 6",

booktitle = "Proccedings of the 13th IET International Conference on Developments in Power System Protection (DPSP), 2016",

publisher = "Institution of Engineering and Technology",

address = "United States",

note = "The 13th International Conference on Developments in Power System Protection, DPSP 2016 ; Conference date: 07-03-2016 Through 10-03-2016",

url = "http://conferences.theiet.org/dpsp/",

}

Ciontea, C-I , Bak, CL , Blaabjerg, F, Madsen, KK & Sterregaard, CH 2016, Fault Analysis for Protection Purposes in Maritime Applications. i Proccedings of the 13th IET International Conference on Developments in Power System Protection (DPSP), 2016. Institution of Engineering and Technology, s. 1 - 6, The 13th International Conference on Developments in Power System Protection, Edinburgh, Storbritannien, 07/03/2016. https://doi.org/10.1049/cp.2016.0084

Fault Analysis for Protection Purposes in Maritime Applications. / Ciontea, Catalin-Iosif ; Bak, Claus Leth ; Blaabjerg, Frede; Madsen, Kjeld Kilsgaard; Sterregaard, Claes Høll.

Proccedings of the 13th IET International Conference on Developments in Power System Protection (DPSP), 2016. Institution of Engineering and Technology, 2016. s. 1 - 6.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Fault Analysis for Protection Purposes in Maritime Applications

AU - Ciontea, Catalin-Iosif

AU - Bak, Claus Leth

AU - Blaabjerg, Frede

AU - Madsen, Kjeld Kilsgaard

AU - Sterregaard, Claes Høll

N1 - Conference code: 13

PY - 2016/3

Y1 - 2016/3

N2 - The method of symmetrical components simplifies analysis of a three-phase network and provides information regarding the existance of a fault in the system. This concept is applied to a radial power system in the maritime sector. A fault analysis is performed for the main types of faults, applied in different locations of the network. The fault current is measured using the curent transformers that are already present in the system as part of a time-inverse overcurrent protection. Simulation results show that the symmetrical components of the currents seen by these current transformers can be used to detect the electric fault. The method also provides an improved fault detection over the conventional overcurrent relays in some situations. All results are obtain using MATLAB/Simulink and are briefly discussed in this paper.

AB - The method of symmetrical components simplifies analysis of a three-phase network and provides information regarding the existance of a fault in the system. This concept is applied to a radial power system in the maritime sector. A fault analysis is performed for the main types of faults, applied in different locations of the network. The fault current is measured using the curent transformers that are already present in the system as part of a time-inverse overcurrent protection. Simulation results show that the symmetrical components of the currents seen by these current transformers can be used to detect the electric fault. The method also provides an improved fault detection over the conventional overcurrent relays in some situations. All results are obtain using MATLAB/Simulink and are briefly discussed in this paper.

KW - Maritime network

KW - Fault current

KW - Overcurrent protection

KW - Current transformer

KW - Symmetrical components

U2 - 10.1049/cp.2016.0084

DO - 10.1049/cp.2016.0084

M3 - Article in proceeding

SN - 978-1-78561-138-4

SP - 1

EP - 6

BT - Proccedings of the 13th IET International Conference on Developments in Power System Protection (DPSP), 2016

PB - Institution of Engineering and Technology

T2 - The 13th International Conference on Developments in Power System Protection

Y2 - 7 March 2016 through 10 March 2016

ER -