Flexible Laser Metal Cutting: An Introduction to the ROBOCUT Laser Cutting Technique

Sigurd Villumsen; Steffen Nordahl Jørgensen; Morten Kristiansen

doi:10.1007/978-3-319-04271-8_19

Flexible Laser Metal Cutting: An Introduction to the ROBOCUT Laser Cutting Technique

Sigurd Villumsen, Steffen Nordahl Jørgensen, Morten Kristiansen

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

3 Citationer (Scopus)

Abstract

This paper describes a new flexible and fast approach to laser cutting
called ROBOCUT. Combined with CAD/CAM technology, laser cutting of metal
provides the flexibility to perform one-of-a-kind cutting and hereby realises mass
production of customised products. Today’s laser cutting techniques possess,
despite their wide use in industry, limitations regarding speed and geometry.
Research trends point towards remote laser cutting techniques which can improve
speed and geometrical freedom and hereby the competitiveness of laser cutting
compared to fixed-tool-based cutting technology such as punching. This paper
presents the concepts and preliminary test results of the ROBOCUT laser cutting
technology, a technology which potentially can revolutionise laser cutting.

Originalsprog	Engelsk
Titel	Proceedings of the 7th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2014)
Forlag	Springer
Publikationsdato	2014
Sider	217-228
Kapitel	19
ISBN (Elektronisk)	978-3-319-04271-8
DOI	https://doi.org/10.1007/978-3-319-04271-8_19
Status	Udgivet - 2014
Begivenhed	the 7th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2014) - Aalborg, Danmark Varighed: 4 feb. 2014 → 7 feb. 2014

Konference

Konference	the 7th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2014)
Land/Område	Danmark
By	Aalborg
Periode	04/02/2014 → 07/02/2014

Navn	Lecture Notes in Production Engineering
ISSN	2194-0525

Emneord

Flexible automation _ Laser cutting _ One-of-a-kind production _ 3D cutting _ Free form cutting

Adgang til dokumentet

10.1007/978-3-319-04271-8_19

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

@inproceedings{ba91cb159ead4a69a620b43c75f1b607,

title = "Flexible Laser Metal Cutting: An Introduction to the ROBOCUT Laser Cutting Technique",

abstract = "This paper describes a new flexible and fast approach to laser cuttingcalled ROBOCUT. Combined with CAD/CAM technology, laser cutting of metalprovides the flexibility to perform one-of-a-kind cutting and hereby realises massproduction of customised products. Today{\textquoteright}s laser cutting techniques possess,despite their wide use in industry, limitations regarding speed and geometry.Research trends point towards remote laser cutting techniques which can improvespeed and geometrical freedom and hereby the competitiveness of laser cuttingcompared to fixed-tool-based cutting technology such as punching. This paperpresents the concepts and preliminary test results of the ROBOCUT laser cuttingtechnology, a technology which potentially can revolutionise laser cutting.",

keywords = "Flexible automation _ Laser cutting _ One-of-a-kind production _ 3D cutting _ Free form cutting",

author = "Sigurd Villumsen and J{\o}rgensen, {Steffen Nordahl} and Morten Kristiansen",

year = "2014",

doi = "10.1007/978-3-319-04271-8_19",

language = "English",

series = "Lecture Notes in Production Engineering",

publisher = "Springer",

pages = "217--228",

booktitle = "Proceedings of the 7th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2014)",

address = "Germany",

note = "the 7th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2014) ; Conference date: 04-02-2014 Through 07-02-2014",

}

Villumsen, S, Jørgensen, SN & Kristiansen, M 2014, Flexible Laser Metal Cutting: An Introduction to the ROBOCUT Laser Cutting Technique. i Proceedings of the 7th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2014). Springer, Lecture Notes in Production Engineering, s. 217-228, the 7th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2014), Aalborg, Danmark, 04/02/2014. https://doi.org/10.1007/978-3-319-04271-8_19

Flexible Laser Metal Cutting: An Introduction to the ROBOCUT Laser Cutting Technique. / Villumsen, Sigurd; Jørgensen, Steffen Nordahl; Kristiansen, Morten.
Proceedings of the 7th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2014). Springer, 2014. s. 217-228 (Lecture Notes in Production Engineering).

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Flexible Laser Metal Cutting

T2 - the 7th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2014)

AU - Villumsen, Sigurd

AU - Jørgensen, Steffen Nordahl

AU - Kristiansen, Morten

PY - 2014

Y1 - 2014

N2 - This paper describes a new flexible and fast approach to laser cuttingcalled ROBOCUT. Combined with CAD/CAM technology, laser cutting of metalprovides the flexibility to perform one-of-a-kind cutting and hereby realises massproduction of customised products. Today’s laser cutting techniques possess,despite their wide use in industry, limitations regarding speed and geometry.Research trends point towards remote laser cutting techniques which can improvespeed and geometrical freedom and hereby the competitiveness of laser cuttingcompared to fixed-tool-based cutting technology such as punching. This paperpresents the concepts and preliminary test results of the ROBOCUT laser cuttingtechnology, a technology which potentially can revolutionise laser cutting.

AB - This paper describes a new flexible and fast approach to laser cuttingcalled ROBOCUT. Combined with CAD/CAM technology, laser cutting of metalprovides the flexibility to perform one-of-a-kind cutting and hereby realises massproduction of customised products. Today’s laser cutting techniques possess,despite their wide use in industry, limitations regarding speed and geometry.Research trends point towards remote laser cutting techniques which can improvespeed and geometrical freedom and hereby the competitiveness of laser cuttingcompared to fixed-tool-based cutting technology such as punching. This paperpresents the concepts and preliminary test results of the ROBOCUT laser cuttingtechnology, a technology which potentially can revolutionise laser cutting.

KW - Flexible automation _ Laser cutting _ One-of-a-kind production _ 3D cutting _ Free form cutting

U2 - 10.1007/978-3-319-04271-8_19

DO - 10.1007/978-3-319-04271-8_19

M3 - Article in proceeding

T3 - Lecture Notes in Production Engineering

SP - 217

EP - 228

BT - Proceedings of the 7th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2014)

PB - Springer

Y2 - 4 February 2014 through 7 February 2014

ER -