Linear Modeling of the Three-Phase Diode Front-Ends with Reduced Capacitance Considering the Continuous Conduction Mode

Lászlo Máthé; Feng Yang; Dong Wang

doi:10.1109/IECON.2016.7794058

Linear Modeling of the Three-Phase Diode Front-Ends with Reduced Capacitance Considering the Continuous Conduction Mode

Lászlo Máthé, Feng Yang, Dong Wang

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

1 Citationer (Scopus)

Abstrakt

Reducing the DC-link capacitance considerably is a new trend in many applications, such as: motor drives, electrolysers etc.. A straight forward method for modelling the diode front-end is to build a non-linear diode based model. This non-linear model gives difficulties when the controllers for the entire drive systems have to be designed. A linearization and simplification to single phase model can be performed; however, when inductance is present at the grid side its performance is not satisfactory. The problem is mainly caused by neglecting the continuous conduction mode of the rectifier in the simplified model. This article proposes a simplified linear model where the continuous conduction mode is also considered. The DC-link voltage and current waveforms obtained through the proposed simplified model matches very well the waveforms obtained with the three phase diode based model and also the experiments.

Originalsprog	Engelsk
Titel	Proceedings of IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society
Antal sider	6
Forlag	IEEE Press
Publikationsdato	okt. 2016
Sider	5007 - 5012
ISBN (Elektronisk)	978-1-5090-3474-1
DOI	https://doi.org/10.1109/IECON.2016.7794058
Status	Udgivet - okt. 2016
Begivenhed	42nd Conference of the Industrial Electronics Society, IECON 2016: 42nd Annual Conference of the IEEE Industrial Electronics Society - Palazzo dei Congressi, Florence, Italien Varighed: 24 okt. 2016 → 27 okt. 2016 http://www.iecon2016.org/?jjj=1471434927195 http://www.iecon2016.org/

Konference

Konference	42nd Conference of the Industrial Electronics Society, IECON 2016
Lokation	Palazzo dei Congressi
Land/Område	Italien
By	Florence
Periode	24/10/2016 → 27/10/2016
Sponsor	IEEE Industrial Electronics Society (IES), Institute of Electrical and Electronics Engineers (IEEE)
Internetadresse	http://www.iecon2016.org/?jjj=1471434927195 http://www.iecon2016.org/

Adgang til dokumentet

10.1109/IECON.2016.7794058

Citationsformater

@inproceedings{add2025ac95b43d88aa0e4f60f37ad4b,

title = "Linear Modeling of the Three-Phase Diode Front-Ends with Reduced Capacitance Considering the Continuous Conduction Mode",

abstract = " Reducing the DC-link capacitance considerably is a new trend in many applications, such as: motor drives, electrolysers etc.. A straight forward method for modelling the diode front-end is to build a non-linear diode based model. This non-linear model gives difficulties when the controllers for the entire drive systems have to be designed. A linearization and simplification to single phase model can be performed; however, when inductance is present at the grid side its performance is not satisfactory. The problem is mainly caused by neglecting the continuous conduction mode of the rectifier in the simplified model. This article proposes a simplified linear model where the continuous conduction mode is also considered. The DC-link voltage and current waveforms obtained through the proposed simplified model matches very well the waveforms obtained with the three phase diode based model and also the experiments. ",

keywords = "Rectifier, Motor drives, Continuous conduction mode, Modelling",

author = "L{\'a}szlo M{\'a}th{\'e} and Feng Yang and Dong Wang",

year = "2016",

month = oct,

doi = "10.1109/IECON.2016.7794058",

language = "English",

pages = "5007 -- 5012",

booktitle = "Proceedings of IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society",

publisher = "IEEE Press",

note = "42nd Conference of the Industrial Electronics Society, IECON 2016 : 42nd Annual Conference of the IEEE Industrial Electronics Society, IECON 2016 ; Conference date: 24-10-2016 Through 27-10-2016",

url = "http://www.iecon2016.org/?jjj=1471434927195, http://www.iecon2016.org/",

}

Máthé, L, Yang, F & Wang, D 2016, Linear Modeling of the Three-Phase Diode Front-Ends with Reduced Capacitance Considering the Continuous Conduction Mode. i Proceedings of IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society. IEEE Press, s. 5007 - 5012, 42nd Conference of the Industrial Electronics Society, IECON 2016, Florence, Italien, 24/10/2016. https://doi.org/10.1109/IECON.2016.7794058

Linear Modeling of the Three-Phase Diode Front-Ends with Reduced Capacitance Considering the Continuous Conduction Mode. / Máthé, Lászlo; Yang, Feng; Wang, Dong.

Proceedings of IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society. IEEE Press, 2016. s. 5007 - 5012.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Linear Modeling of the Three-Phase Diode Front-Ends with Reduced Capacitance Considering the Continuous Conduction Mode

AU - Máthé, Lászlo

AU - Yang, Feng

AU - Wang, Dong

PY - 2016/10

Y1 - 2016/10

N2 - Reducing the DC-link capacitance considerably is a new trend in many applications, such as: motor drives, electrolysers etc.. A straight forward method for modelling the diode front-end is to build a non-linear diode based model. This non-linear model gives difficulties when the controllers for the entire drive systems have to be designed. A linearization and simplification to single phase model can be performed; however, when inductance is present at the grid side its performance is not satisfactory. The problem is mainly caused by neglecting the continuous conduction mode of the rectifier in the simplified model. This article proposes a simplified linear model where the continuous conduction mode is also considered. The DC-link voltage and current waveforms obtained through the proposed simplified model matches very well the waveforms obtained with the three phase diode based model and also the experiments.

AB - Reducing the DC-link capacitance considerably is a new trend in many applications, such as: motor drives, electrolysers etc.. A straight forward method for modelling the diode front-end is to build a non-linear diode based model. This non-linear model gives difficulties when the controllers for the entire drive systems have to be designed. A linearization and simplification to single phase model can be performed; however, when inductance is present at the grid side its performance is not satisfactory. The problem is mainly caused by neglecting the continuous conduction mode of the rectifier in the simplified model. This article proposes a simplified linear model where the continuous conduction mode is also considered. The DC-link voltage and current waveforms obtained through the proposed simplified model matches very well the waveforms obtained with the three phase diode based model and also the experiments.

KW - Rectifier

KW - Motor drives

KW - Continuous conduction mode

KW - Modelling

U2 - 10.1109/IECON.2016.7794058

DO - 10.1109/IECON.2016.7794058

M3 - Article in proceeding

SP - 5007

EP - 5012

BT - Proceedings of IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society

PB - IEEE Press

T2 - 42nd Conference of the Industrial Electronics Society, IECON 2016

Y2 - 24 October 2016 through 27 October 2016

ER -

Linear Modeling of the Three-Phase Diode Front-Ends with Reduced Capacitance Considering the Continuous Conduction Mode

Abstrakt

Konference

Adgang til dokumentet

Fingeraftryk

Citationsformater