Measurements for validation of high voltage underground cable modelling

Claus Leth Bak; Unnur Stella Gudmundsdottir; Wojciech Tomasz Wiechowski; Kim Søgaard; Martin Randrup Knardrupgård

Measurements for validation of high voltage underground cable modelling

Claus Leth Bak, Unnur Stella Gudmundsdottir, Wojciech Tomasz Wiechowski, Kim Søgaard, Martin Randrup Knardrupgård

AAU Energi

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

1090 Downloads (Pure)

Abstract

This paper discusses studies concerning cable modelling for long high voltage AC cable lines. In investigating the possibilities of using long cables instead of overhead lines, the simulation results must be trustworthy. Therefore a model validation is of great importance. This paper describes field test setups and measurements on an already installed cable line with several cross bonding points. These measurements are to be used for cable model validation, which are prepared using simulations. The proposed field tests should be used to validate the cable model for overvoltage problems. The verification shall be done both in the frequency domain and in the time domain.

Originalsprog	Engelsk
Titel	Proceedings of the International Conference on Power Systems Transients (IPST 2009)
Antal sider	7
Publikationsdato	2009
Status	Udgivet - 2009
Begivenhed	International Conference on Power Systems Transients (IPST 2009) - Kyoto, Japan Varighed: 2 jun. 2009 → 6 jul. 2009

Konference

Konference	International Conference on Power Systems Transients (IPST 2009)
Land/Område	Japan
By	Kyoto
Periode	02/06/2009 → 06/07/2009

Bibliografisk note

Paper 15

Adgang til dokumentet

PublicationAccepteret manuskript, 517 KB

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

@inproceedings{065e668071db11de9240000ea68e967b,

title = "Measurements for validation of high voltage underground cable modelling",

abstract = "This paper discusses studies concerning cable modelling for long high voltage AC cable lines. In investigating the possibilities of using long cables instead of overhead lines, the simulation results must be trustworthy. Therefore a model validation is of great importance. This paper describes field test setups and measurements on an already installed cable line with several cross bonding points. These measurements are to be used for cable model validation, which are prepared using simulations. The proposed field tests should be used to validate the cable model for overvoltage problems. The verification shall be done both in the frequency domain and in the time domain.",

author = "Bak, {Claus Leth} and Gudmundsdottir, {Unnur Stella} and Wiechowski, {Wojciech Tomasz} and Kim S{\o}gaard and Knardrupg{\aa}rd, {Martin Randrup}",

note = "Paper 15 ; International Conference on Power Systems Transients (IPST 2009) ; Conference date: 02-06-2009 Through 06-07-2009",

year = "2009",

language = "English",

booktitle = "Proceedings of the International Conference on Power Systems Transients (IPST 2009)",

}

Measurements for validation of high voltage underground cable modelling. / Bak, Claus Leth; Gudmundsdottir, Unnur Stella; Wiechowski, Wojciech Tomasz et al.
Proceedings of the International Conference on Power Systems Transients (IPST 2009). 2009.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Measurements for validation of high voltage underground cable modelling

AU - Bak, Claus Leth

AU - Gudmundsdottir, Unnur Stella

AU - Wiechowski, Wojciech Tomasz

AU - Søgaard, Kim

AU - Knardrupgård, Martin Randrup

N1 - Paper 15

PY - 2009

Y1 - 2009

N2 - This paper discusses studies concerning cable modelling for long high voltage AC cable lines. In investigating the possibilities of using long cables instead of overhead lines, the simulation results must be trustworthy. Therefore a model validation is of great importance. This paper describes field test setups and measurements on an already installed cable line with several cross bonding points. These measurements are to be used for cable model validation, which are prepared using simulations. The proposed field tests should be used to validate the cable model for overvoltage problems. The verification shall be done both in the frequency domain and in the time domain.

AB - This paper discusses studies concerning cable modelling for long high voltage AC cable lines. In investigating the possibilities of using long cables instead of overhead lines, the simulation results must be trustworthy. Therefore a model validation is of great importance. This paper describes field test setups and measurements on an already installed cable line with several cross bonding points. These measurements are to be used for cable model validation, which are prepared using simulations. The proposed field tests should be used to validate the cable model for overvoltage problems. The verification shall be done both in the frequency domain and in the time domain.

M3 - Article in proceeding

BT - Proceedings of the International Conference on Power Systems Transients (IPST 2009)

T2 - International Conference on Power Systems Transients (IPST 2009)

Y2 - 2 June 2009 through 6 July 2009

ER -

Measurements for validation of high voltage underground cable modelling

Abstract

Konference

Bibliografisk note

Adgang til dokumentet

AUB Link

Fingeraftryk

Citationsformater