Resumé

This study aims at using the InVentilate unit in the cooling case, without heat recovery. It results in a relatively low inlet air temperature. Different solutions have been tested to decrease the risk of draught in the occupied zone:
‐ Using a mixer (2 designs)
‐ Using an inlet grille
‐ Using an inlet cover
OriginalsprogEngelsk
Udgivelses stedAalborg
ForlagDepartment of Civil Engineering, Aalborg University
Antal sider38
StatusUdgivet - mar. 2015
NavnDCE Contract Reports
Nummer171
ISSNuden issn

Fingerprint

Air intakes
Waste heat utilization
Cooling
Temperature

Citer dette

Dreau, J. L., Heiselberg, P. K., & Jensen, R. L. (2015). MicroVent (part III): Measurement of the draught rate in the occupied zone. Aalborg: Department of Civil Engineering, Aalborg University. DCE Contract Reports, Nr. 171
Dreau, Jerome Le ; Heiselberg, Per Kvols ; Jensen, Rasmus Lund. / MicroVent (part III) : Measurement of the draught rate in the occupied zone. Aalborg : Department of Civil Engineering, Aalborg University, 2015. 38 s. (DCE Contract Reports; Nr. 171).
@book{46fe035c13a64d4891f4d1852891954e,
title = "MicroVent (part III): Measurement of the draught rate in the occupied zone",
abstract = "This study aims at using the InVentilate unit in the cooling case, without heat recovery. It results in a relatively low inlet air temperature. Different solutions have been tested to decrease the risk of draught in the occupied zone:‐ Using a mixer (2 designs)‐ Using an inlet grille‐ Using an inlet cover",
author = "Dreau, {Jerome Le} and Heiselberg, {Per Kvols} and Jensen, {Rasmus Lund}",
year = "2015",
month = "3",
language = "English",
series = "DCE Contract Reports",
publisher = "Department of Civil Engineering, Aalborg University",
number = "171",
address = "Denmark",

}

Dreau, JL, Heiselberg, PK & Jensen, RL 2015, MicroVent (part III): Measurement of the draught rate in the occupied zone. DCE Contract Reports, nr. 171, Department of Civil Engineering, Aalborg University, Aalborg.

MicroVent (part III) : Measurement of the draught rate in the occupied zone. / Dreau, Jerome Le; Heiselberg, Per Kvols; Jensen, Rasmus Lund.

Aalborg : Department of Civil Engineering, Aalborg University, 2015. 38 s. (DCE Contract Reports; Nr. 171).

Publikation: Bog/antologi/afhandling/rapportRapportForskning

TY - RPRT

T1 - MicroVent (part III)

T2 - Measurement of the draught rate in the occupied zone

AU - Dreau, Jerome Le

AU - Heiselberg, Per Kvols

AU - Jensen, Rasmus Lund

PY - 2015/3

Y1 - 2015/3

N2 - This study aims at using the InVentilate unit in the cooling case, without heat recovery. It results in a relatively low inlet air temperature. Different solutions have been tested to decrease the risk of draught in the occupied zone:‐ Using a mixer (2 designs)‐ Using an inlet grille‐ Using an inlet cover

AB - This study aims at using the InVentilate unit in the cooling case, without heat recovery. It results in a relatively low inlet air temperature. Different solutions have been tested to decrease the risk of draught in the occupied zone:‐ Using a mixer (2 designs)‐ Using an inlet grille‐ Using an inlet cover

M3 - Report

T3 - DCE Contract Reports

BT - MicroVent (part III)

PB - Department of Civil Engineering, Aalborg University

CY - Aalborg

ER -

Dreau JL, Heiselberg PK, Jensen RL. MicroVent (part III): Measurement of the draught rate in the occupied zone. Aalborg: Department of Civil Engineering, Aalborg University, 2015. 38 s. (DCE Contract Reports; Nr. 171).