Noise reduction using the concept of acoustic black holes designed based on modal analysis

Bjørnar Saurdal; Daniel Villadsen; Sergey V. Sorokin; Lasse S. Ledet

Noise reduction using the concept of acoustic black holes designed based on modal analysis

Bjørnar Saurdal, Daniel Villadsen, Sergey V. Sorokin, Lasse S. Ledet

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

Abstract

The classical theory of acoustic black holes (ABHs) is quite complex with its application being limited to simple plates and beams. The aim of this paper is to promote ABHs for the community of engineers well familiar with finite element analysis (FEA). Firstly, a validation of FEA as a tool to analyze and design ABHs is done by conventional FE studies replicating experiments, which have already been conducted. Then the concept of modal analysis-based design of ABH is proposed and verified by means of harmonic analysis (both using standard ANSYS software). As the damping layer is an essential part of any real fabricated products utilizing the ABH effect, the influence of its size and thickness are studied by the means of FEM and compared to what has been found in earlier experiments.

Originalsprog	Engelsk
Titel	EURODYN 2020 - 11th International Conference on Structural Dynamics, Proceedings : Volume II
Redaktører	Manolis Papadrakakis, Michalis Fragiadakis, Costas Papadimitriou
Antal sider	8
Forlag	Institute of Structural Analysis and Antiseismic Research School of Civil Engineering National Technical University of Athens (NTUA)
Publikationsdato	2020
Sider	2489-2496
ISBN (Elektronisk)	978-618850721-0
Status	Udgivet - 2020
Begivenhed	11th International Conference on Structural Dynamics, EURODYN 2020 - Virtual, Athens, Grækenland Varighed: 23 nov. 2020 → 26 nov. 2020

Konference

Konference	11th International Conference on Structural Dynamics, EURODYN 2020
Land/Område	Grækenland
By	Virtual, Athens
Periode	23/11/2020 → 26/11/2020

Navn	Proceedings of the International Conference on Structural Dynamic , EURODYN
Vol/bind	2
ISSN	2311-9020

Bibliografisk note

Publisher Copyright:
© 2020 European Association for Structural Dynamics. All rights reserved.

Adgang til dokumentet

https://generalconferencefiles.s3-eu-west-1.amazonaws.com/eurodyn_2020_ebook_procedings_vol2.pdf

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Andre filer og links

Link to publication in Scopus

Citationsformater

Saurdal, B., Villadsen, D., Sorokin, S. V., & Ledet, L. S. (2020). Noise reduction using the concept of acoustic black holes designed based on modal analysis. I M. Papadrakakis, M. Fragiadakis, & C. Papadimitriou (red.), EURODYN 2020 - 11th International Conference on Structural Dynamics, Proceedings: Volume II (s. 2489-2496). Institute of Structural Analysis and Antiseismic Research School of Civil Engineering National Technical University of Athens (NTUA). https://generalconferencefiles.s3-eu-west-1.amazonaws.com/eurodyn_2020_ebook_procedings_vol2.pdf

Saurdal, Bjørnar ; Villadsen, Daniel ; Sorokin, Sergey V. et al. / Noise reduction using the concept of acoustic black holes designed based on modal analysis. EURODYN 2020 - 11th International Conference on Structural Dynamics, Proceedings: Volume II. red. / Manolis Papadrakakis ; Michalis Fragiadakis ; Costas Papadimitriou. Institute of Structural Analysis and Antiseismic Research School of Civil Engineering National Technical University of Athens (NTUA), 2020. s. 2489-2496 (Proceedings of the International Conference on Structural Dynamic , EURODYN, Bind 2).

@inproceedings{c67a871da2314c26bc3e98637ddea07b,

title = "Noise reduction using the concept of acoustic black holes designed based on modal analysis",

abstract = "The classical theory of acoustic black holes (ABHs) is quite complex with its application being limited to simple plates and beams. The aim of this paper is to promote ABHs for the community of engineers well familiar with finite element analysis (FEA). Firstly, a validation of FEA as a tool to analyze and design ABHs is done by conventional FE studies replicating experiments, which have already been conducted. Then the concept of modal analysis-based design of ABH is proposed and verified by means of harmonic analysis (both using standard ANSYS software). As the damping layer is an essential part of any real fabricated products utilizing the ABH effect, the influence of its size and thickness are studied by the means of FEM and compared to what has been found in earlier experiments.",

keywords = "Acoustic Black Holes, Eigenmodes, Modal Analysis, Noise, Vibrations",

author = "Bj{\o}rnar Saurdal and Daniel Villadsen and Sorokin, {Sergey V.} and Ledet, {Lasse S.}",

note = "Publisher Copyright: {\textcopyright} 2020 European Association for Structural Dynamics. All rights reserved.; 11th International Conference on Structural Dynamics, EURODYN 2020 ; Conference date: 23-11-2020 Through 26-11-2020",

year = "2020",

language = "English",

series = "Proceedings of the International Conference on Structural Dynamic , EURODYN",

publisher = "Institute of Structural Analysis and Antiseismic Research School of Civil Engineering National Technical University of Athens (NTUA)",

pages = "2489--2496",

editor = "Manolis Papadrakakis and Michalis Fragiadakis and Costas Papadimitriou",

booktitle = "EURODYN 2020 - 11th International Conference on Structural Dynamics, Proceedings",

}

Saurdal, B, Villadsen, D, Sorokin, SV & Ledet, LS 2020, Noise reduction using the concept of acoustic black holes designed based on modal analysis. i M Papadrakakis, M Fragiadakis & C Papadimitriou (red), EURODYN 2020 - 11th International Conference on Structural Dynamics, Proceedings: Volume II. Institute of Structural Analysis and Antiseismic Research School of Civil Engineering National Technical University of Athens (NTUA), Proceedings of the International Conference on Structural Dynamic , EURODYN, bind 2, s. 2489-2496, 11th International Conference on Structural Dynamics, EURODYN 2020, Virtual, Athens, Grækenland, 23/11/2020. <https://generalconferencefiles.s3-eu-west-1.amazonaws.com/eurodyn_2020_ebook_procedings_vol2.pdf>

Noise reduction using the concept of acoustic black holes designed based on modal analysis. / Saurdal, Bjørnar; Villadsen, Daniel; Sorokin, Sergey V. et al.
EURODYN 2020 - 11th International Conference on Structural Dynamics, Proceedings: Volume II. red. / Manolis Papadrakakis; Michalis Fragiadakis; Costas Papadimitriou. Institute of Structural Analysis and Antiseismic Research School of Civil Engineering National Technical University of Athens (NTUA), 2020. s. 2489-2496 (Proceedings of the International Conference on Structural Dynamic , EURODYN, Bind 2).

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Noise reduction using the concept of acoustic black holes designed based on modal analysis

AU - Saurdal, Bjørnar

AU - Villadsen, Daniel

AU - Sorokin, Sergey V.

AU - Ledet, Lasse S.

PY - 2020

Y1 - 2020

N2 - The classical theory of acoustic black holes (ABHs) is quite complex with its application being limited to simple plates and beams. The aim of this paper is to promote ABHs for the community of engineers well familiar with finite element analysis (FEA). Firstly, a validation of FEA as a tool to analyze and design ABHs is done by conventional FE studies replicating experiments, which have already been conducted. Then the concept of modal analysis-based design of ABH is proposed and verified by means of harmonic analysis (both using standard ANSYS software). As the damping layer is an essential part of any real fabricated products utilizing the ABH effect, the influence of its size and thickness are studied by the means of FEM and compared to what has been found in earlier experiments.

AB - The classical theory of acoustic black holes (ABHs) is quite complex with its application being limited to simple plates and beams. The aim of this paper is to promote ABHs for the community of engineers well familiar with finite element analysis (FEA). Firstly, a validation of FEA as a tool to analyze and design ABHs is done by conventional FE studies replicating experiments, which have already been conducted. Then the concept of modal analysis-based design of ABH is proposed and verified by means of harmonic analysis (both using standard ANSYS software). As the damping layer is an essential part of any real fabricated products utilizing the ABH effect, the influence of its size and thickness are studied by the means of FEM and compared to what has been found in earlier experiments.

KW - Acoustic Black Holes

KW - Eigenmodes

KW - Modal Analysis

KW - Noise

KW - Vibrations

UR - http://www.scopus.com/inward/record.url?scp=85098741192&partnerID=8YFLogxK

M3 - Article in proceeding

AN - SCOPUS:85098741192

T3 - Proceedings of the International Conference on Structural Dynamic , EURODYN

SP - 2489

EP - 2496

BT - EURODYN 2020 - 11th International Conference on Structural Dynamics, Proceedings

A2 - Papadrakakis, Manolis

A2 - Fragiadakis, Michalis

A2 - Papadimitriou, Costas

PB - Institute of Structural Analysis and Antiseismic Research School of Civil Engineering National Technical University of Athens (NTUA)

T2 - 11th International Conference on Structural Dynamics, EURODYN 2020

Y2 - 23 November 2020 through 26 November 2020

ER -

Saurdal B, Villadsen D, Sorokin SV, Ledet LS. Noise reduction using the concept of acoustic black holes designed based on modal analysis. I Papadrakakis M, Fragiadakis M, Papadimitriou C, red., EURODYN 2020 - 11th International Conference on Structural Dynamics, Proceedings: Volume II. Institute of Structural Analysis and Antiseismic Research School of Civil Engineering National Technical University of Athens (NTUA). 2020. s. 2489-2496. (Proceedings of the International Conference on Structural Dynamic , EURODYN, Bind 2).

Noise reduction using the concept of acoustic black holes designed based on modal analysis

Abstract

Konference

Bibliografisk note

Adgang til dokumentet

AUB Link

Andre filer og links

Fingeraftryk

Citationsformater