Optimized Control Strategy For Over Loaded Offshore Wind Turbines

Publikation: Bidrag til bog/antologi/rapport/konference proceedingKonferenceartikel i proceedingForskningpeer review

Resumé

Abstract
Optimized control strategy for overloaded offshore wind turbines

Introduction

Operation and maintenance cost are an important part of cost of energy especially for offshore wind farms. Typically unplanned service is called for due to detection off excessive loads on components, e.g., the tower.
In the process of decreasing the cost of energy of wind turbines it is relevant to continue some level of production while awaiting service and repair of the offshore wind turbine. This is typically done operating the wind turbine in a power de-rated operation mode, assuming that lower power generation results in lower loads on the wind turbine, which enables continued production until next service.


Approach

Recent results in Model Predictive Control (MPC) applied to wind turbines show a potential for presenting possible controller tunings which weighs multiple conflicting objectives of generated power and the damage equivalent loads for tower fore-aft. Based on these different weights Pareto Fronts depicting the relationship between the generated power and the damage equivalent loads can be computed. Results have shown that the Pareto Front is a very effective tool for selecting the best controller tuning for a given wind turbine. It also enables a very safe and robust comparison between a new control strategy and the present one.

Main body of abstract

Is it true that power de-rating indeed the best way to reduce loads?
The power de-rating approach has the drawback of only indirectly handling the changed objective of the wind turbine operation while awaiting the repair, instead of dealing directly with relevant fatigue loads on the wind turbine.
This paper describes and demonstrates this new controller selection tool for the case of operating wind turbine with faults, awaiting repair and service at offshore location, where accessibility can be problematic. The controller objectives are focused directly on the actual objective like lowering of fore aft fatigue loads, instead of using an indirect objective of de-rating the power production of the wind turbine.
This means what the wind turbine controller can be selected and tuned directly to obtain a specified reduced fatigue load/ DEL while awaiting service. This will in most cases increase the power generation, compared to the de-rating approach. The latter is a conservative approach, which might end up with too high power reduction as results of ensuring the load reduction to the given level.
A MPC controller is configured and tuned using this novel approach including Pareto fronts. It is compared to the existing de-rating strategy using high fidelity aero-servo-elastic simulation code and the possibilities for reduction of cost of energy are outlined.

Conclusion

In this paper computed Pareto Fronts of a Model Predictive Controller of a wind turbine are used to de-tune a wind turbine operating with faults, such that a controller tuning is selected which lowers the fatigue loads of the wind turbine, such that the model predictive controller is selected for a given fatigue load objective. The Pareto Fronts and evaluations of the proposed scheme is evaluated in a high fidelity aero-eleastic code.


Learning objectives
This work has two main learning objectives.
Compute Pareto Fronts of generated power and tower fore-aft fatigue loads of a wind turbine for a number a model predictive controller turnings with different weightings between power generation and load reduction.
Selection of model predictive controller turnings depending on the operational conditions of the wind turbine. e.g. for offshore wind turbines with faults.
OriginalsprogEngelsk
TitelProceedings of EWEA Offshore 2015
ForlagEWEA
Publikationsdatomar. 2015
StatusUdgivet - mar. 2015
BegivenhedEWEA Offshore 2015: The European Wind Energy Association - Copenhagen, Danmark
Varighed: 10 mar. 201512 mar. 2015

Konference

KonferenceEWEA Offshore 2015
LandDanmark
ByCopenhagen
Periode10/03/201512/03/2015
NavnEuropean Wind Energy Association (EWEA OFFSHORE). Proceedings

Fingerprint

Offshore wind turbines
Wind turbines
Controllers
Fatigue of materials
Towers
Power generation
Repair
Tuning
Model predictive control
Costs
Offshore wind farms

Citer dette

Odgaard, P. F., Knudsen, T., Wisniewski, R., & Bak, T. (2015). Optimized Control Strategy For Over Loaded Offshore Wind Turbines. I Proceedings of EWEA Offshore 2015 EWEA. European Wind Energy Association (EWEA OFFSHORE). Proceedings
Odgaard, Peter Fogh ; Knudsen, Torben ; Wisniewski, Rafal ; Bak, Thomas. / Optimized Control Strategy For Over Loaded Offshore Wind Turbines. Proceedings of EWEA Offshore 2015. EWEA, 2015. (European Wind Energy Association (EWEA OFFSHORE). Proceedings).
@inproceedings{a36b3b775514414793aae8f8ae7c8a9a,
title = "Optimized Control Strategy For Over Loaded Offshore Wind Turbines",
abstract = "AbstractOptimized control strategy for overloaded offshore wind turbinesIntroductionOperation and maintenance cost are an important part of cost of energy especially for offshore wind farms. Typically unplanned service is called for due to detection off excessive loads on components, e.g., the tower.In the process of decreasing the cost of energy of wind turbines it is relevant to continue some level of production while awaiting service and repair of the offshore wind turbine. This is typically done operating the wind turbine in a power de-rated operation mode, assuming that lower power generation results in lower loads on the wind turbine, which enables continued production until next service. ApproachRecent results in Model Predictive Control (MPC) applied to wind turbines show a potential for presenting possible controller tunings which weighs multiple conflicting objectives of generated power and the damage equivalent loads for tower fore-aft. Based on these different weights Pareto Fronts depicting the relationship between the generated power and the damage equivalent loads can be computed. Results have shown that the Pareto Front is a very effective tool for selecting the best controller tuning for a given wind turbine. It also enables a very safe and robust comparison between a new control strategy and the present one.Main body of abstractIs it true that power de-rating indeed the best way to reduce loads? The power de-rating approach has the drawback of only indirectly handling the changed objective of the wind turbine operation while awaiting the repair, instead of dealing directly with relevant fatigue loads on the wind turbine.This paper describes and demonstrates this new controller selection tool for the case of operating wind turbine with faults, awaiting repair and service at offshore location, where accessibility can be problematic. The controller objectives are focused directly on the actual objective like lowering of fore aft fatigue loads, instead of using an indirect objective of de-rating the power production of the wind turbine. This means what the wind turbine controller can be selected and tuned directly to obtain a specified reduced fatigue load/ DEL while awaiting service. This will in most cases increase the power generation, compared to the de-rating approach. The latter is a conservative approach, which might end up with too high power reduction as results of ensuring the load reduction to the given level.A MPC controller is configured and tuned using this novel approach including Pareto fronts. It is compared to the existing de-rating strategy using high fidelity aero-servo-elastic simulation code and the possibilities for reduction of cost of energy are outlined. ConclusionIn this paper computed Pareto Fronts of a Model Predictive Controller of a wind turbine are used to de-tune a wind turbine operating with faults, such that a controller tuning is selected which lowers the fatigue loads of the wind turbine, such that the model predictive controller is selected for a given fatigue load objective. The Pareto Fronts and evaluations of the proposed scheme is evaluated in a high fidelity aero-eleastic code.Learning objectivesThis work has two main learning objectives.Compute Pareto Fronts of generated power and tower fore-aft fatigue loads of a wind turbine for a number a model predictive controller turnings with different weightings between power generation and load reduction. Selection of model predictive controller turnings depending on the operational conditions of the wind turbine. e.g. for offshore wind turbines with faults.",
author = "Odgaard, {Peter Fogh} and Torben Knudsen and Rafal Wisniewski and Thomas Bak",
year = "2015",
month = "3",
language = "English",
booktitle = "Proceedings of EWEA Offshore 2015",
publisher = "EWEA",

}

Odgaard, PF, Knudsen, T, Wisniewski, R & Bak, T 2015, Optimized Control Strategy For Over Loaded Offshore Wind Turbines. i Proceedings of EWEA Offshore 2015. EWEA, European Wind Energy Association (EWEA OFFSHORE). Proceedings, EWEA Offshore 2015, Copenhagen, Danmark, 10/03/2015.

Optimized Control Strategy For Over Loaded Offshore Wind Turbines. / Odgaard, Peter Fogh; Knudsen, Torben; Wisniewski, Rafal; Bak, Thomas.

Proceedings of EWEA Offshore 2015. EWEA, 2015.

Publikation: Bidrag til bog/antologi/rapport/konference proceedingKonferenceartikel i proceedingForskningpeer review

TY - GEN

T1 - Optimized Control Strategy For Over Loaded Offshore Wind Turbines

AU - Odgaard, Peter Fogh

AU - Knudsen, Torben

AU - Wisniewski, Rafal

AU - Bak, Thomas

PY - 2015/3

Y1 - 2015/3

N2 - AbstractOptimized control strategy for overloaded offshore wind turbinesIntroductionOperation and maintenance cost are an important part of cost of energy especially for offshore wind farms. Typically unplanned service is called for due to detection off excessive loads on components, e.g., the tower.In the process of decreasing the cost of energy of wind turbines it is relevant to continue some level of production while awaiting service and repair of the offshore wind turbine. This is typically done operating the wind turbine in a power de-rated operation mode, assuming that lower power generation results in lower loads on the wind turbine, which enables continued production until next service. ApproachRecent results in Model Predictive Control (MPC) applied to wind turbines show a potential for presenting possible controller tunings which weighs multiple conflicting objectives of generated power and the damage equivalent loads for tower fore-aft. Based on these different weights Pareto Fronts depicting the relationship between the generated power and the damage equivalent loads can be computed. Results have shown that the Pareto Front is a very effective tool for selecting the best controller tuning for a given wind turbine. It also enables a very safe and robust comparison between a new control strategy and the present one.Main body of abstractIs it true that power de-rating indeed the best way to reduce loads? The power de-rating approach has the drawback of only indirectly handling the changed objective of the wind turbine operation while awaiting the repair, instead of dealing directly with relevant fatigue loads on the wind turbine.This paper describes and demonstrates this new controller selection tool for the case of operating wind turbine with faults, awaiting repair and service at offshore location, where accessibility can be problematic. The controller objectives are focused directly on the actual objective like lowering of fore aft fatigue loads, instead of using an indirect objective of de-rating the power production of the wind turbine. This means what the wind turbine controller can be selected and tuned directly to obtain a specified reduced fatigue load/ DEL while awaiting service. This will in most cases increase the power generation, compared to the de-rating approach. The latter is a conservative approach, which might end up with too high power reduction as results of ensuring the load reduction to the given level.A MPC controller is configured and tuned using this novel approach including Pareto fronts. It is compared to the existing de-rating strategy using high fidelity aero-servo-elastic simulation code and the possibilities for reduction of cost of energy are outlined. ConclusionIn this paper computed Pareto Fronts of a Model Predictive Controller of a wind turbine are used to de-tune a wind turbine operating with faults, such that a controller tuning is selected which lowers the fatigue loads of the wind turbine, such that the model predictive controller is selected for a given fatigue load objective. The Pareto Fronts and evaluations of the proposed scheme is evaluated in a high fidelity aero-eleastic code.Learning objectivesThis work has two main learning objectives.Compute Pareto Fronts of generated power and tower fore-aft fatigue loads of a wind turbine for a number a model predictive controller turnings with different weightings between power generation and load reduction. Selection of model predictive controller turnings depending on the operational conditions of the wind turbine. e.g. for offshore wind turbines with faults.

AB - AbstractOptimized control strategy for overloaded offshore wind turbinesIntroductionOperation and maintenance cost are an important part of cost of energy especially for offshore wind farms. Typically unplanned service is called for due to detection off excessive loads on components, e.g., the tower.In the process of decreasing the cost of energy of wind turbines it is relevant to continue some level of production while awaiting service and repair of the offshore wind turbine. This is typically done operating the wind turbine in a power de-rated operation mode, assuming that lower power generation results in lower loads on the wind turbine, which enables continued production until next service. ApproachRecent results in Model Predictive Control (MPC) applied to wind turbines show a potential for presenting possible controller tunings which weighs multiple conflicting objectives of generated power and the damage equivalent loads for tower fore-aft. Based on these different weights Pareto Fronts depicting the relationship between the generated power and the damage equivalent loads can be computed. Results have shown that the Pareto Front is a very effective tool for selecting the best controller tuning for a given wind turbine. It also enables a very safe and robust comparison between a new control strategy and the present one.Main body of abstractIs it true that power de-rating indeed the best way to reduce loads? The power de-rating approach has the drawback of only indirectly handling the changed objective of the wind turbine operation while awaiting the repair, instead of dealing directly with relevant fatigue loads on the wind turbine.This paper describes and demonstrates this new controller selection tool for the case of operating wind turbine with faults, awaiting repair and service at offshore location, where accessibility can be problematic. The controller objectives are focused directly on the actual objective like lowering of fore aft fatigue loads, instead of using an indirect objective of de-rating the power production of the wind turbine. This means what the wind turbine controller can be selected and tuned directly to obtain a specified reduced fatigue load/ DEL while awaiting service. This will in most cases increase the power generation, compared to the de-rating approach. The latter is a conservative approach, which might end up with too high power reduction as results of ensuring the load reduction to the given level.A MPC controller is configured and tuned using this novel approach including Pareto fronts. It is compared to the existing de-rating strategy using high fidelity aero-servo-elastic simulation code and the possibilities for reduction of cost of energy are outlined. ConclusionIn this paper computed Pareto Fronts of a Model Predictive Controller of a wind turbine are used to de-tune a wind turbine operating with faults, such that a controller tuning is selected which lowers the fatigue loads of the wind turbine, such that the model predictive controller is selected for a given fatigue load objective. The Pareto Fronts and evaluations of the proposed scheme is evaluated in a high fidelity aero-eleastic code.Learning objectivesThis work has two main learning objectives.Compute Pareto Fronts of generated power and tower fore-aft fatigue loads of a wind turbine for a number a model predictive controller turnings with different weightings between power generation and load reduction. Selection of model predictive controller turnings depending on the operational conditions of the wind turbine. e.g. for offshore wind turbines with faults.

UR - http://www.ewea.org/offshore2015/conference/programme/info2.php?id2=76&id=31%20&ordre=9#top

UR - http://www.ewea.org/offshore2015/conference/proceedings/

M3 - Article in proceeding

BT - Proceedings of EWEA Offshore 2015

PB - EWEA

ER -

Odgaard PF, Knudsen T, Wisniewski R, Bak T. Optimized Control Strategy For Over Loaded Offshore Wind Turbines. I Proceedings of EWEA Offshore 2015. EWEA. 2015. (European Wind Energy Association (EWEA OFFSHORE). Proceedings).