Projekter pr. år
Abstract
The Mooring Solution for Large Wave Energy Converter project focused on the estimation and optimisation of the mooring cost for four selected Danish wave energy converters. In the project, single converters have been used as case studies. Since the WECs studied are single units, their associated cost of energy is not aligned with the long term expected market cost.
In order to extend the work carried out during the project the aim of this work is to look at cost reduction opportunities related to mass production of the selected WECs. The analysis will focus on reduction of the capital expenditure of the project, with specific focus on the costs associated to the mooring components, with no indication of cost saving opportunities of operational costs, which, nevertheless, could have an important impact in the project.
In order to extend the work carried out during the project the aim of this work is to look at cost reduction opportunities related to mass production of the selected WECs. The analysis will focus on reduction of the capital expenditure of the project, with specific focus on the costs associated to the mooring components, with no indication of cost saving opportunities of operational costs, which, nevertheless, could have an important impact in the project.
Originalsprog | Engelsk |
---|
Udgivelsessted | Aalborg |
---|---|
Forlag | Department of Civil Engineering, Aalborg University |
Antal sider | 14 |
Status | Udgivet - 2018 |
Navn | DCE Contract Reports |
---|---|
Nummer | 198 |
ISSN | uden issn |
Emneord
- Wave energy concerters
- WECs
- Large scale production
- Mooring
Fingeraftryk
Dyk ned i forskningsemnerne om 'Potential Cost Reduction Through Large Scale Production: CM3'. Sammen danner de et unikt fingeraftryk.Projekter
- 1 Afsluttet
-
Forankringsløsninger for store bølgekraftanlæg
Kofoed, J. P., Thomsen, J. B., Kramer, M. B., Ferri, F. & Pecher, A.
01/07/2014 → 30/06/2018
Projekter: Projekt › Forskning