Power Control of Grid-Forming Converters Based on Full-State Feedback

Meng Chen; Dao Zhou; Frede Blaabjerg

doi:10.1109/IECON49645.2022.9968836

Power Control of Grid-Forming Converters Based on Full-State Feedback

^*Kontaktforfatter

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

8 Downloads (Pure)

Abstrakt

The active and reactive power controllers of grid-forming converters are traditionally designed separately, which relies on the assumption of loop decoupling. This paper proposes a full-state feedback control for the power loops of grid-forming converters. First, the power loops are modeled considering their natural coupling, which, therefore, can apply to all kinds of line impedance, i.e., resistive, inductive, or complex. Then a full-state feedback control design is used. By this way, the eigenvalues of the system can be arbitrarily placed to any positions in the timescale of power loops. Therefore, the parameters can be directly chosen by the predefined specifications. A step-by-step parameters design procedure is also given in this paper. Experimental results verify the proposed method.

Originalsprog	Engelsk
Titel	IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society
Forlag	IEEE
Publikationsdato	2022
ISBN (Elektronisk)	9781665480253
DOI	https://doi.org/10.1109/IECON49645.2022.9968836
Status	Udgivet - 2022

Navn	Proceedings of the Annual Conference of the IEEE Industrial Electronics Society
ISSN	1553-572X

Adgang til dokumentet

10.1109/IECON49645.2022.9968836

mengAccepteret manuskript, 489 KBLicens: CC BY-NC-ND 4.0

Citationsformater

@inproceedings{a3cf6d268a63439886a1201aee7dec54,

title = "Power Control of Grid-Forming Converters Based on Full-State Feedback",

abstract = "The active and reactive power controllers of grid-forming converters are traditionally designed separately, which relies on the assumption of loop decoupling. This paper proposes a full-state feedback control for the power loops of grid-forming converters. First, the power loops are modeled considering their natural coupling, which, therefore, can apply to all kinds of line impedance, i.e., resistive, inductive, or complex. Then a full-state feedback control design is used. By this way, the eigenvalues of the system can be arbitrarily placed to any positions in the timescale of power loops. Therefore, the parameters can be directly chosen by the predefined specifications. A step-by-step parameters design procedure is also given in this paper. Experimental results verify the proposed method.",

keywords = "controllability, full-state feedback control, grid-forming converter, line impedance, loop coupling",

author = "Meng Chen and Dao Zhou and Frede Blaabjerg",

year = "2022",

doi = "10.1109/IECON49645.2022.9968836",

language = "English",

series = "Proceedings of the Annual Conference of the IEEE Industrial Electronics Society",

publisher = "IEEE",

booktitle = "IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society",

address = "United States",

}

Power Control of Grid-Forming Converters Based on Full-State Feedback. / Chen, Meng ; Zhou, Dao ; Blaabjerg, Frede.

IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2022. (Proceedings of the Annual Conference of the IEEE Industrial Electronics Society).

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Power Control of Grid-Forming Converters Based on Full-State Feedback

AU - Chen, Meng

AU - Zhou, Dao

AU - Blaabjerg, Frede

PY - 2022

Y1 - 2022

N2 - The active and reactive power controllers of grid-forming converters are traditionally designed separately, which relies on the assumption of loop decoupling. This paper proposes a full-state feedback control for the power loops of grid-forming converters. First, the power loops are modeled considering their natural coupling, which, therefore, can apply to all kinds of line impedance, i.e., resistive, inductive, or complex. Then a full-state feedback control design is used. By this way, the eigenvalues of the system can be arbitrarily placed to any positions in the timescale of power loops. Therefore, the parameters can be directly chosen by the predefined specifications. A step-by-step parameters design procedure is also given in this paper. Experimental results verify the proposed method.

AB - The active and reactive power controllers of grid-forming converters are traditionally designed separately, which relies on the assumption of loop decoupling. This paper proposes a full-state feedback control for the power loops of grid-forming converters. First, the power loops are modeled considering their natural coupling, which, therefore, can apply to all kinds of line impedance, i.e., resistive, inductive, or complex. Then a full-state feedback control design is used. By this way, the eigenvalues of the system can be arbitrarily placed to any positions in the timescale of power loops. Therefore, the parameters can be directly chosen by the predefined specifications. A step-by-step parameters design procedure is also given in this paper. Experimental results verify the proposed method.

KW - controllability

KW - full-state feedback control

KW - grid-forming converter

KW - line impedance

KW - loop coupling

U2 - 10.1109/IECON49645.2022.9968836

DO - 10.1109/IECON49645.2022.9968836

M3 - Article in proceeding

T3 - Proceedings of the Annual Conference of the IEEE Industrial Electronics Society

BT - IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society

PB - IEEE

ER -

Power Control of Grid-Forming Converters Based on Full-State Feedback

Abstrakt

Adgang til dokumentet

Fingeraftryk

Citationsformater