Power electronics for renewable energy systems

Publikation: Bidrag til bog/antologi/rapport/konference proceedingKonferenceartikel i proceedingForskningpeer review

13 Citationer (Scopus)
11451 Downloads (Pure)

Resumé

The global electrical energy consumption is still rising and there is a demand to double the power capacity within 20 years. The production, distribution and use of energy should be as technological efficient as possible and incentives to save energy at the end-user should also be set up. Deregulation of energy has in the past lowered the investment in larger power plants, which means the need for new electrical power sources may be very high in the near future. Two major technologies will play important roles to solve the future problems. One is to change the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. Another is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss some of the most emerging renewable energy sources, wind energy and photovoltaics, which by means of power electronics are changing from being minor energy sources to be acting as important power sources in the energy system.

OriginalsprogEngelsk
TitelProceedings of the International Conference on Power Engineering, Energy and Electrical Drives, 2009. POWERENG '09.
Antal sider4
ForlagIEEE
Publikationsdato2009
Sider9-12
ISBN (Trykt)978-1-4244-4611-7
DOI
StatusUdgivet - 2009
BegivenhedProceedings of the International Conference on Power Engineering, Energy and Electrical Drives, 2009. POWERENG '09. - Lisbon, Portugal
Varighed: 18 mar. 200920 mar. 2009

Konference

KonferenceProceedings of the International Conference on Power Engineering, Energy and Electrical Drives, 2009. POWERENG '09.
LandPortugal
ByLisbon
Periode18/03/200920/03/2009

Fingerprint

Power electronics
Renewable energy resources
Deregulation
Power transmission
Wind power
Power generation
Power plants
Energy utilization

Citer dette

Iov, F., & Blaabjerg, F. (2009). Power electronics for renewable energy systems. I Proceedings of the International Conference on Power Engineering, Energy and Electrical Drives, 2009. POWERENG '09. (s. 9-12). IEEE. https://doi.org/10.1109/POWERENG.2009.4915139
Iov, Florin ; Blaabjerg, Frede. / Power electronics for renewable energy systems. Proceedings of the International Conference on Power Engineering, Energy and Electrical Drives, 2009. POWERENG '09.. IEEE, 2009. s. 9-12
@inproceedings{e19e8c90feba11de9a61000ea68e967b,
title = "Power electronics for renewable energy systems",
abstract = "The global electrical energy consumption is still rising and there is a demand to double the power capacity within 20 years. The production, distribution and use of energy should be as technological efficient as possible and incentives to save energy at the end-user should also be set up. Deregulation of energy has in the past lowered the investment in larger power plants, which means the need for new electrical power sources may be very high in the near future. Two major technologies will play important roles to solve the future problems. One is to change the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. Another is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss some of the most emerging renewable energy sources, wind energy and photovoltaics, which by means of power electronics are changing from being minor energy sources to be acting as important power sources in the energy system.",
author = "Florin Iov and Frede Blaabjerg",
note = "INSPEC Accession Number:10645814",
year = "2009",
doi = "10.1109/POWERENG.2009.4915139",
language = "English",
isbn = "978-1-4244-4611-7",
pages = "9--12",
booktitle = "Proceedings of the International Conference on Power Engineering, Energy and Electrical Drives, 2009. POWERENG '09.",
publisher = "IEEE",
address = "United States",

}

Iov, F & Blaabjerg, F 2009, Power electronics for renewable energy systems. i Proceedings of the International Conference on Power Engineering, Energy and Electrical Drives, 2009. POWERENG '09.. IEEE, s. 9-12, Proceedings of the International Conference on Power Engineering, Energy and Electrical Drives, 2009. POWERENG '09., Lisbon, Portugal, 18/03/2009. https://doi.org/10.1109/POWERENG.2009.4915139

Power electronics for renewable energy systems. / Iov, Florin; Blaabjerg, Frede.

Proceedings of the International Conference on Power Engineering, Energy and Electrical Drives, 2009. POWERENG '09.. IEEE, 2009. s. 9-12.

Publikation: Bidrag til bog/antologi/rapport/konference proceedingKonferenceartikel i proceedingForskningpeer review

TY - GEN

T1 - Power electronics for renewable energy systems

AU - Iov, Florin

AU - Blaabjerg, Frede

N1 - INSPEC Accession Number:10645814

PY - 2009

Y1 - 2009

N2 - The global electrical energy consumption is still rising and there is a demand to double the power capacity within 20 years. The production, distribution and use of energy should be as technological efficient as possible and incentives to save energy at the end-user should also be set up. Deregulation of energy has in the past lowered the investment in larger power plants, which means the need for new electrical power sources may be very high in the near future. Two major technologies will play important roles to solve the future problems. One is to change the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. Another is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss some of the most emerging renewable energy sources, wind energy and photovoltaics, which by means of power electronics are changing from being minor energy sources to be acting as important power sources in the energy system.

AB - The global electrical energy consumption is still rising and there is a demand to double the power capacity within 20 years. The production, distribution and use of energy should be as technological efficient as possible and incentives to save energy at the end-user should also be set up. Deregulation of energy has in the past lowered the investment in larger power plants, which means the need for new electrical power sources may be very high in the near future. Two major technologies will play important roles to solve the future problems. One is to change the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. Another is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss some of the most emerging renewable energy sources, wind energy and photovoltaics, which by means of power electronics are changing from being minor energy sources to be acting as important power sources in the energy system.

U2 - 10.1109/POWERENG.2009.4915139

DO - 10.1109/POWERENG.2009.4915139

M3 - Article in proceeding

SN - 978-1-4244-4611-7

SP - 9

EP - 12

BT - Proceedings of the International Conference on Power Engineering, Energy and Electrical Drives, 2009. POWERENG '09.

PB - IEEE

ER -

Iov F, Blaabjerg F. Power electronics for renewable energy systems. I Proceedings of the International Conference on Power Engineering, Energy and Electrical Drives, 2009. POWERENG '09.. IEEE. 2009. s. 9-12 https://doi.org/10.1109/POWERENG.2009.4915139