Simulation of Thermal Behaviour of a Lithium Titanate Oxide Battery

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

1 Citation (Scopus)

Resumé

One of the reasonable possibilities to investigate the battery behaviour under various temperature and current conditions is the development of a model of the lithium-ion batteries and then by employing the simulation technique to anticipate their behaviour. This method not only can save time but also they can predict the behaviour of the batteries through simulation. In this investigation, a three-dimensional model is developed to simulate thermal and electrochemical behaviour of a 13Ah lithium-ion battery. In addition, the temperature dependency of the battery cell parameters was considered in the model in order to investigate the influence of temperature on various parameters such as heat generation during battery cell operation. Maccor automated test system and isothermal battery calorimeter were used as experimental setup to validate the thermal model, which was able to predict the heat generation rate and temperature at different positions of the battery. The three-dimensional temperature distributions which were achieved from the modelling and experiment were in well agreement with each other throughout the entire of discharge cycling at different environmental temperatures and discharge rates.
OriginalsprogEngelsk
Artikelnummer679
TidsskriftEnergies
Vol/bind12
Udgave nummer4
Sider (fra-til)1-15
Antal sider15
ISSN1996-1073
DOI
StatusUdgivet - feb. 2019

Fingerprint

Battery
Oxides
Lithium
Lithium-ion Battery
Heat generation
Simulation
Temperature
Heat
Predict
Calorimeter
Three-dimensional
Thermal Model
Calorimeters
Cell
Cycling
Test System
Temperature Distribution
Temperature distribution
Hot Temperature
Entire

Citer dette

@article{43528b75fc0f4f09837eded89ba983fa,
title = "Simulation of Thermal Behaviour of a Lithium Titanate Oxide Battery",
abstract = "One of the reasonable possibilities to investigate the battery behaviour under various temperature and current conditions is the development of a model of the lithium-ion batteries and then by employing the simulation technique to anticipate their behaviour. This method not only can save time but also they can predict the behaviour of the batteries through simulation. In this investigation, a three-dimensional model is developed to simulate thermal and electrochemical behaviour of a 13Ah lithium-ion battery. In addition, the temperature dependency of the battery cell parameters was considered in the model in order to investigate the influence of temperature on various parameters such as heat generation during battery cell operation. Maccor automated test system and isothermal battery calorimeter were used as experimental setup to validate the thermal model, which was able to predict the heat generation rate and temperature at different positions of the battery. The three-dimensional temperature distributions which were achieved from the modelling and experiment were in well agreement with each other throughout the entire of discharge cycling at different environmental temperatures and discharge rates.",
keywords = "Thermal modelling, Thermal behaviour, Lithium titanate oxide batteries",
author = "Madani, {Seyed Saeed} and Erik Schaltz and K{\ae}r, {S{\o}ren Knudsen}",
year = "2019",
month = "2",
doi = "10.3390/en12040679",
language = "English",
volume = "12",
pages = "1--15",
journal = "Energies",
issn = "1996-1073",
publisher = "M D P I AG",
number = "4",

}

Simulation of Thermal Behaviour of a Lithium Titanate Oxide Battery. / Madani, Seyed Saeed; Schaltz, Erik; Kær, Søren Knudsen.

I: Energies, Bind 12, Nr. 4, 679, 02.2019, s. 1-15.

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

TY - JOUR

T1 - Simulation of Thermal Behaviour of a Lithium Titanate Oxide Battery

AU - Madani, Seyed Saeed

AU - Schaltz, Erik

AU - Kær, Søren Knudsen

PY - 2019/2

Y1 - 2019/2

N2 - One of the reasonable possibilities to investigate the battery behaviour under various temperature and current conditions is the development of a model of the lithium-ion batteries and then by employing the simulation technique to anticipate their behaviour. This method not only can save time but also they can predict the behaviour of the batteries through simulation. In this investigation, a three-dimensional model is developed to simulate thermal and electrochemical behaviour of a 13Ah lithium-ion battery. In addition, the temperature dependency of the battery cell parameters was considered in the model in order to investigate the influence of temperature on various parameters such as heat generation during battery cell operation. Maccor automated test system and isothermal battery calorimeter were used as experimental setup to validate the thermal model, which was able to predict the heat generation rate and temperature at different positions of the battery. The three-dimensional temperature distributions which were achieved from the modelling and experiment were in well agreement with each other throughout the entire of discharge cycling at different environmental temperatures and discharge rates.

AB - One of the reasonable possibilities to investigate the battery behaviour under various temperature and current conditions is the development of a model of the lithium-ion batteries and then by employing the simulation technique to anticipate their behaviour. This method not only can save time but also they can predict the behaviour of the batteries through simulation. In this investigation, a three-dimensional model is developed to simulate thermal and electrochemical behaviour of a 13Ah lithium-ion battery. In addition, the temperature dependency of the battery cell parameters was considered in the model in order to investigate the influence of temperature on various parameters such as heat generation during battery cell operation. Maccor automated test system and isothermal battery calorimeter were used as experimental setup to validate the thermal model, which was able to predict the heat generation rate and temperature at different positions of the battery. The three-dimensional temperature distributions which were achieved from the modelling and experiment were in well agreement with each other throughout the entire of discharge cycling at different environmental temperatures and discharge rates.

KW - Thermal modelling

KW - Thermal behaviour

KW - Lithium titanate oxide batteries

U2 - 10.3390/en12040679

DO - 10.3390/en12040679

M3 - Journal article

VL - 12

SP - 1

EP - 15

JO - Energies

JF - Energies

SN - 1996-1073

IS - 4

M1 - 679

ER -