Sustainability Comparison of a New Reconfigurable Machine Tool and a Conventional Milling Machine

Alessandro Bruzzone; Alessandra Ferrari; Alessia Napoleone

doi:10.1007/978-3-031-16281-7_61

Sustainability Comparison of a New Reconfigurable Machine Tool and a Conventional Milling Machine

Alessandro Bruzzone, Alessandra Ferrari, Alessia Napoleone

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

Abstract

Since few decades sustainability is an increasingly emerging and relevant topic supported nowadays by international policies. Many restrictions and rules have been introduced in order to guarantee a sustainable development and meet most of human society’s future goals. Although sustainability is a very wide topic that concerns different subjects, this paper, focusing on manufacturing companies and on the importance of reconfigurable machine tools, uses the term “sustainability” considering both an environmental and industrial point of view. In particular the evaluation of the sustainability of a new Reconfigurable Machine Tool (RMT) is proposed and compared to a conventional milling machine tool. The Life Cycle Assessment (LCA) method has been used for the sustainability evaluation; it has been implemented through the open-source software OpenLCA. The analysis shows that the new Reconfigurable Machine Tool has lower pollutant emissions and environmental impact values are lower than the conventional milling machine tool.

Originalsprog	Engelsk
Titel	Advances in System-Integrated Intelligence - Proceedings of the 6th International Conference on System-Integrated Intelligence SysInt 2022, Genova, Italy : SYSINT2022: Advances in System-Integrated Intelligence
Redaktører	Maurizio Valle, Dirk Lehmhus, Christian Gianoglio, Edoardo Ragusa, Lucia Seminara, Stefan Bosse, Ali Ibrahim, Klaus-Dieter Thoben
Antal sider	11
Forlag	Springer
Publikationsdato	2022
Sider	646-656
ISBN (Trykt)	9783031162800
DOI	https://doi.org/10.1007/978-3-031-16281-7_61
Status	Udgivet - 2022
Begivenhed	6th International Conference on System-Integrated Intelligence, SysInt 2022 - Genova, Italien Varighed: 7 sep. 2022 → 9 sep. 2022

Konference

Konference	6th International Conference on System-Integrated Intelligence, SysInt 2022
Land/Område	Italien
By	Genova
Periode	07/09/2022 → 09/09/2022

Navn	Lecture Notes in Networks and Systems
Vol/bind	546 LNNS
ISSN	2367-3370

Bibliografisk note

Publisher Copyright:
© 2023, The Author(s), under exclusive license to Springer Nature Switzerland AG.

Adgang til dokumentet

10.1007/978-3-031-16281-7_61

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Andre filer og links

Link to publication in Scopus

Citationsformater

Bruzzone, A., Ferrari, A., & Napoleone, A. (2022). Sustainability Comparison of a New Reconfigurable Machine Tool and a Conventional Milling Machine. I M. Valle, D. Lehmhus, C. Gianoglio, E. Ragusa, L. Seminara, S. Bosse, A. Ibrahim, & K-D. Thoben (red.), Advances in System-Integrated Intelligence - Proceedings of the 6th International Conference on System-Integrated Intelligence SysInt 2022, Genova, Italy: SYSINT2022: Advances in System-Integrated Intelligence (s. 646-656). Springer. https://doi.org/10.1007/978-3-031-16281-7_61

Bruzzone, Alessandro ; Ferrari, Alessandra ; Napoleone, Alessia. / Sustainability Comparison of a New Reconfigurable Machine Tool and a Conventional Milling Machine. Advances in System-Integrated Intelligence - Proceedings of the 6th International Conference on System-Integrated Intelligence SysInt 2022, Genova, Italy: SYSINT2022: Advances in System-Integrated Intelligence. red. / Maurizio Valle ; Dirk Lehmhus ; Christian Gianoglio ; Edoardo Ragusa ; Lucia Seminara ; Stefan Bosse ; Ali Ibrahim ; Klaus-Dieter Thoben. Springer, 2022. s. 646-656 (Lecture Notes in Networks and Systems, Bind 546 LNNS).

@inproceedings{27a6573b976046acac7287d15b816663,

title = "Sustainability Comparison of a New Reconfigurable Machine Tool and a Conventional Milling Machine",

abstract = "Since few decades sustainability is an increasingly emerging and relevant topic supported nowadays by international policies. Many restrictions and rules have been introduced in order to guarantee a sustainable development and meet most of human society{\textquoteright}s future goals. Although sustainability is a very wide topic that concerns different subjects, this paper, focusing on manufacturing companies and on the importance of reconfigurable machine tools, uses the term “sustainability” considering both an environmental and industrial point of view. In particular the evaluation of the sustainability of a new Reconfigurable Machine Tool (RMT) is proposed and compared to a conventional milling machine tool. The Life Cycle Assessment (LCA) method has been used for the sustainability evaluation; it has been implemented through the open-source software OpenLCA. The analysis shows that the new Reconfigurable Machine Tool has lower pollutant emissions and environmental impact values are lower than the conventional milling machine tool.",

keywords = "Milling, Reconfigurable machine tool, Sustainability",

author = "Alessandro Bruzzone and Alessandra Ferrari and Alessia Napoleone",

note = "Publisher Copyright: {\textcopyright} 2023, The Author(s), under exclusive license to Springer Nature Switzerland AG.; 6th International Conference on System-Integrated Intelligence, SysInt 2022 ; Conference date: 07-09-2022 Through 09-09-2022",

year = "2022",

doi = "10.1007/978-3-031-16281-7_61",

language = "English",

isbn = "9783031162800",

series = "Lecture Notes in Networks and Systems",

publisher = "Springer",

pages = "646--656",

editor = "Maurizio Valle and Dirk Lehmhus and Christian Gianoglio and Edoardo Ragusa and Lucia Seminara and Stefan Bosse and Ali Ibrahim and Klaus-Dieter Thoben",

booktitle = "Advances in System-Integrated Intelligence - Proceedings of the 6th International Conference on System-Integrated Intelligence SysInt 2022, Genova, Italy",

address = "Germany",

}

Bruzzone, A, Ferrari, A & Napoleone, A 2022, Sustainability Comparison of a New Reconfigurable Machine Tool and a Conventional Milling Machine. i M Valle, D Lehmhus, C Gianoglio, E Ragusa, L Seminara, S Bosse, A Ibrahim & K-D Thoben (red), Advances in System-Integrated Intelligence - Proceedings of the 6th International Conference on System-Integrated Intelligence SysInt 2022, Genova, Italy: SYSINT2022: Advances in System-Integrated Intelligence. Springer, Lecture Notes in Networks and Systems, bind 546 LNNS, s. 646-656, 6th International Conference on System-Integrated Intelligence, SysInt 2022, Genova, Italien, 07/09/2022. https://doi.org/10.1007/978-3-031-16281-7_61

Sustainability Comparison of a New Reconfigurable Machine Tool and a Conventional Milling Machine. / Bruzzone, Alessandro; Ferrari, Alessandra; Napoleone, Alessia.
Advances in System-Integrated Intelligence - Proceedings of the 6th International Conference on System-Integrated Intelligence SysInt 2022, Genova, Italy: SYSINT2022: Advances in System-Integrated Intelligence. red. / Maurizio Valle; Dirk Lehmhus; Christian Gianoglio; Edoardo Ragusa; Lucia Seminara; Stefan Bosse; Ali Ibrahim; Klaus-Dieter Thoben. Springer, 2022. s. 646-656 (Lecture Notes in Networks and Systems, Bind 546 LNNS).

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Sustainability Comparison of a New Reconfigurable Machine Tool and a Conventional Milling Machine

AU - Bruzzone, Alessandro

AU - Ferrari, Alessandra

AU - Napoleone, Alessia

PY - 2022

Y1 - 2022

N2 - Since few decades sustainability is an increasingly emerging and relevant topic supported nowadays by international policies. Many restrictions and rules have been introduced in order to guarantee a sustainable development and meet most of human society’s future goals. Although sustainability is a very wide topic that concerns different subjects, this paper, focusing on manufacturing companies and on the importance of reconfigurable machine tools, uses the term “sustainability” considering both an environmental and industrial point of view. In particular the evaluation of the sustainability of a new Reconfigurable Machine Tool (RMT) is proposed and compared to a conventional milling machine tool. The Life Cycle Assessment (LCA) method has been used for the sustainability evaluation; it has been implemented through the open-source software OpenLCA. The analysis shows that the new Reconfigurable Machine Tool has lower pollutant emissions and environmental impact values are lower than the conventional milling machine tool.

AB - Since few decades sustainability is an increasingly emerging and relevant topic supported nowadays by international policies. Many restrictions and rules have been introduced in order to guarantee a sustainable development and meet most of human society’s future goals. Although sustainability is a very wide topic that concerns different subjects, this paper, focusing on manufacturing companies and on the importance of reconfigurable machine tools, uses the term “sustainability” considering both an environmental and industrial point of view. In particular the evaluation of the sustainability of a new Reconfigurable Machine Tool (RMT) is proposed and compared to a conventional milling machine tool. The Life Cycle Assessment (LCA) method has been used for the sustainability evaluation; it has been implemented through the open-source software OpenLCA. The analysis shows that the new Reconfigurable Machine Tool has lower pollutant emissions and environmental impact values are lower than the conventional milling machine tool.

KW - Milling

KW - Reconfigurable machine tool

KW - Sustainability

UR - http://www.scopus.com/inward/record.url?scp=85137975415&partnerID=8YFLogxK

U2 - 10.1007/978-3-031-16281-7_61

DO - 10.1007/978-3-031-16281-7_61

M3 - Article in proceeding

AN - SCOPUS:85137975415

SN - 9783031162800

T3 - Lecture Notes in Networks and Systems

SP - 646

EP - 656

BT - Advances in System-Integrated Intelligence - Proceedings of the 6th International Conference on System-Integrated Intelligence SysInt 2022, Genova, Italy

A2 - Valle, Maurizio

A2 - Lehmhus, Dirk

A2 - Gianoglio, Christian

A2 - Ragusa, Edoardo

A2 - Seminara, Lucia

A2 - Bosse, Stefan

A2 - Ibrahim, Ali

A2 - Thoben, Klaus-Dieter

PB - Springer

T2 - 6th International Conference on System-Integrated Intelligence, SysInt 2022

Y2 - 7 September 2022 through 9 September 2022

ER -

Bruzzone A, Ferrari A, Napoleone A. Sustainability Comparison of a New Reconfigurable Machine Tool and a Conventional Milling Machine. I Valle M, Lehmhus D, Gianoglio C, Ragusa E, Seminara L, Bosse S, Ibrahim A, Thoben K-D, red., Advances in System-Integrated Intelligence - Proceedings of the 6th International Conference on System-Integrated Intelligence SysInt 2022, Genova, Italy: SYSINT2022: Advances in System-Integrated Intelligence. Springer. 2022. s. 646-656. (Lecture Notes in Networks and Systems, Bind 546 LNNS). doi: 10.1007/978-3-031-16281-7_61

Sustainability Comparison of a New Reconfigurable Machine Tool and a Conventional Milling Machine

Abstract

Konference

Bibliografisk note

Adgang til dokumentet

AUB Link

Andre filer og links

Fingeraftryk

Citationsformater