Switching studies for the Horns Rev 2 wind farm main cable

Christian Flytkjær Jensen; Filipe Faria da Silva; Claus Leth Bak; W.  Wiechowski

Switching studies for the Horns Rev 2 wind farm main cable

Christian Flytkjær Jensen, Filipe Faria da Silva, Claus Leth Bak, W. Wiechowski

AAU Energi

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

638 Downloads (Pure)

Abstract

This article proposes a method of constructing a PSCAD model suitable for switching studies in a system containing long HVAC cables. The transmission network connection to the 215 MW offshore wind farm Horns Rev 2 is used as a
case study. The connection to Horns Rev 2 consists of two land cable sections with a total length of 57.7 km and a 42 km long submarine cable. The submarine cable is a three phase type of cable, and three single conductor cables are used for the land cable. Methods of recalculating the physical cable parameters, given in the data sheet, to parameters suitable for the cable model
used in PSCAD are given. Results obtained using the model are compared to full scale measurement of the energization of the system, and good agreement is found. The influence of different simulation parameters are examined; amongst them the modeling of the screen, the relative permittivity, and the use of different
cable models.

Originalsprog	Engelsk
Titel	Proceedings of the International Conference on Power Systems Transients, IPST 2011
Antal sider	7
Forlag	Delft University Press
Publikationsdato	jun. 2011
Status	Udgivet - jun. 2011
Begivenhed	International Conference on Power Systems Transients, IPST 2011 - Delft, Holland Varighed: 14 jun. 2011 → 17 jun. 2011

Konference

Konference	International Conference on Power Systems Transients, IPST 2011
Land/Område	Holland
By	Delft
Periode	14/06/2011 → 17/06/2011

Adgang til dokumentet

C:\Users\clb\Desktop\Publikationer\Papers 2011\IPST_218Forlagets udgivne version, 1,14 MB

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

@inproceedings{400f4a502a384f9186fea7bf6602b784,

title = "Switching studies for the Horns Rev 2 wind farm main cable",

abstract = "This article proposes a method of constructing a PSCAD model suitable for switching studies in a system containing long HVAC cables. The transmission network connection to the 215 MW offshore wind farm Horns Rev 2 is used as a case study. The connection to Horns Rev 2 consists of two land cable sections with a total length of 57.7 km and a 42 km long submarine cable. The submarine cable is a three phase type of cable, and three single conductor cables are used for the land cable. Methods of recalculating the physical cable parameters, given in the data sheet, to parameters suitable for the cable model used in PSCAD are given. Results obtained using the model are compared to full scale measurement of the energization of the system, and good agreement is found. The influence of different simulation parameters are examined; amongst them the modeling of the screen, the relative permittivity, and the use of different cable models.",

keywords = "Electromagnetic transients, Cable models, Overvoltages, PSCAD",

author = "Jensen, {Christian Flytkj{\ae}r} and {Faria da Silva}, Filipe and Bak, {Claus Leth} and W. Wiechowski",

year = "2011",

month = jun,

language = "English",

booktitle = "Proceedings of the International Conference on Power Systems Transients, IPST 2011",

publisher = "Delft University Press",

note = "International Conference on Power Systems Transients, IPST 2011 ; Conference date: 14-06-2011 Through 17-06-2011",

}

Switching studies for the Horns Rev 2 wind farm main cable. / Jensen, Christian Flytkjær; Faria da Silva, Filipe ; Bak, Claus Leth et al.
Proceedings of the International Conference on Power Systems Transients, IPST 2011. Delft University Press, 2011.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Switching studies for the Horns Rev 2 wind farm main cable

AU - Jensen, Christian Flytkjær

AU - Faria da Silva, Filipe

AU - Bak, Claus Leth

AU - Wiechowski, W.

PY - 2011/6

Y1 - 2011/6

N2 - This article proposes a method of constructing a PSCAD model suitable for switching studies in a system containing long HVAC cables. The transmission network connection to the 215 MW offshore wind farm Horns Rev 2 is used as a case study. The connection to Horns Rev 2 consists of two land cable sections with a total length of 57.7 km and a 42 km long submarine cable. The submarine cable is a three phase type of cable, and three single conductor cables are used for the land cable. Methods of recalculating the physical cable parameters, given in the data sheet, to parameters suitable for the cable model used in PSCAD are given. Results obtained using the model are compared to full scale measurement of the energization of the system, and good agreement is found. The influence of different simulation parameters are examined; amongst them the modeling of the screen, the relative permittivity, and the use of different cable models.

AB - This article proposes a method of constructing a PSCAD model suitable for switching studies in a system containing long HVAC cables. The transmission network connection to the 215 MW offshore wind farm Horns Rev 2 is used as a case study. The connection to Horns Rev 2 consists of two land cable sections with a total length of 57.7 km and a 42 km long submarine cable. The submarine cable is a three phase type of cable, and three single conductor cables are used for the land cable. Methods of recalculating the physical cable parameters, given in the data sheet, to parameters suitable for the cable model used in PSCAD are given. Results obtained using the model are compared to full scale measurement of the energization of the system, and good agreement is found. The influence of different simulation parameters are examined; amongst them the modeling of the screen, the relative permittivity, and the use of different cable models.

KW - Electromagnetic transients

KW - Cable models

KW - Overvoltages

KW - PSCAD

M3 - Article in proceeding

BT - Proceedings of the International Conference on Power Systems Transients, IPST 2011

PB - Delft University Press

T2 - International Conference on Power Systems Transients, IPST 2011

Y2 - 14 June 2011 through 17 June 2011

ER -

Switching studies for the Horns Rev 2 wind farm main cable

Abstract

Konference

Adgang til dokumentet

AUB Link

Fingeraftryk

Citationsformater