Thermal bridges of modern windows: experience with minimum acceptable surface temperature

Publikation: Bidrag til bog/antologi/rapport/konference proceedingKonferenceartikel i proceedingForskningpeer review

48 Downloads (Pure)

Abstrakt

With its focus on reduced energy consumption, contemporary housing construction requires a highly insulated and airtight building envelope with as few thermal bridges as possible.Windows must be carefully designed, as thermal bridges can lead to surface condensation or mold growth, even if the window has an U-factor of 1 W/(m2·K) or lower. This paper describes the development of modern, energy efficient Danish windows with reduced thermal bridges. It focuses on materials, geometry, and sealing of window panes based on a literature review. Examples of modern windows are presented. Experience with the minimum acceptable surface temperature regarding surface condensation or mold growth, implemented in the Danish Building Regulations in 2010, and the calculation method for this temperature based on international standards is
discussed. The introduction of the minimum acceptable surface temperature has been an important driver for the development of new window solutions in Denmark, increasing the inner-surface temperature at the sealing of window panes. However, it will not stop complaints fromconsumers, as this temperature is calculated under standardized conditions. Increasing requirements for airtightness increases the importance of sufficient ventilation in order to prevent problems with condensation or mold growth.
OriginalsprogEngelsk
TitelThermal Performance of the Exterior Envelopes of Whole Buildings XII, Clearwater Beach, Florida, Dec 2013 : Conference Proceedings
Antal sider13
UdgivelsesstedClearwater, Florida
ForlagAmerican Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
Publikationsdatodec. 2013
ISBN (Elektronisk)978-1-936504-61-9
StatusUdgivet - dec. 2013
BegivenhedBuildings XII: Thermal Performance of the Exterior Envelopes of Whole Buildings - Sheraton Sand Key Resort, Clearwater Beach, Florida, USA
Varighed: 1 dec. 20135 dec. 2013
Konferencens nummer: 12

Konference

KonferenceBuildings XII
Nummer12
LokationSheraton Sand Key Resort
LandUSA
ByClearwater Beach, Florida
Periode01/12/201305/12/2013
NavnASHRAE
ISSN2166-8469

Citationsformater