Tools for environmental simulations and calculations in an Integrated Design Process

Publikation: Bidrag til bog/antologi/rapport/konference proceedingKonferenceabstrakt i proceedingForskningpeer review

Resumé

Present paper is focused on how students at Architecture & Design, Aalborg University in Denmark, are working with an integrated design process where the environmental simulations and calculations are used from the beginning of the design process and even in the analysis phase of the project to address environmental issues. This paper in specific takes its starting point in a student project where the student is working with a building complex that have to fulfill the passive house standards and through that the student explores the use of the simulation and calculation tools in the design process. What the research shows is that the students can have great benefit from utilizing such tools in the design process if they are able to utilize them in a dynamic way where the simulation and calculation tools does not become the main focus. Furthermore the research reveals that the tools traditionally used to document projects in a Danish context and the tools that traditionally have been taught to the students are insufficient as they are too detailed. It shows that it becomes even more important to utilize the full spectrum of the programs applied like in this case Ecotect where the possibilities of interoperability and the different possibilities are utilized pointing towards a heavier focus of the utilization of BIM tools in the design process from the first stages.
OriginalsprogEngelsk
TitelRe.building : Abstract book 98th ACSA Annual meeting
RedaktørerBruce Goodwin, Judith Kinnard
Antal sider1
Udgivelses stedWashington DC
ForlagACSA Press
Publikationsdatofeb. 2010
Sider22
Kapitel22
ISBN (Trykt)9780935502756
StatusUdgivet - feb. 2010
Begivenhed98th ACSA Annual Meeting - New Orleans, USA
Varighed: 4 mar. 20107 mar. 2010

Konference

Konference98th ACSA Annual Meeting
LandUSA
ByNew Orleans
Periode04/03/201007/03/2010

Emneord

  • Arkitektur
  • Miljø
  • Uddannelse

Citer dette

Petersen, M. D., & Knudstrup, M-A. (2010). Tools for environmental simulations and calculations in an Integrated Design Process. I B. Goodwin, & J. Kinnard (red.), Re.building: Abstract book 98th ACSA Annual meeting (s. 22). Washington DC: ACSA Press.
Petersen, Mads Dines ; Knudstrup, Mary-Ann. / Tools for environmental simulations and calculations in an Integrated Design Process. Re.building: Abstract book 98th ACSA Annual meeting. red. / Bruce Goodwin ; Judith Kinnard. Washington DC : ACSA Press, 2010. s. 22
@inbook{d30afa00bce24968b712e5696e773f7f,
title = "Tools for environmental simulations and calculations in an Integrated Design Process",
abstract = "Present paper is focused on how students at Architecture & Design, Aalborg University in Denmark, are working with an integrated design process where the environmental simulations and calculations are used from the beginning of the design process and even in the analysis phase of the project to address environmental issues. This paper in specific takes its starting point in a student project where the student is working with a building complex that have to fulfill the passive house standards and through that the student explores the use of the simulation and calculation tools in the design process. What the research shows is that the students can have great benefit from utilizing such tools in the design process if they are able to utilize them in a dynamic way where the simulation and calculation tools does not become the main focus. Furthermore the research reveals that the tools traditionally used to document projects in a Danish context and the tools that traditionally have been taught to the students are insufficient as they are too detailed. It shows that it becomes even more important to utilize the full spectrum of the programs applied like in this case Ecotect where the possibilities of interoperability and the different possibilities are utilized pointing towards a heavier focus of the utilization of BIM tools in the design process from the first stages.",
keywords = "Arkitektur, Milj{\o}, Uddannelse",
author = "Petersen, {Mads Dines} and Mary-Ann Knudstrup",
year = "2010",
month = "2",
language = "English",
isbn = "9780935502756",
pages = "22",
editor = "Bruce Goodwin and Kinnard, {Judith }",
booktitle = "Re.building",
publisher = "ACSA Press",

}

Petersen, MD & Knudstrup, M-A 2010, Tools for environmental simulations and calculations in an Integrated Design Process. i B Goodwin & J Kinnard (red), Re.building: Abstract book 98th ACSA Annual meeting. ACSA Press, Washington DC, s. 22, 98th ACSA Annual Meeting, New Orleans, USA, 04/03/2010.

Tools for environmental simulations and calculations in an Integrated Design Process. / Petersen, Mads Dines; Knudstrup, Mary-Ann.

Re.building: Abstract book 98th ACSA Annual meeting. red. / Bruce Goodwin; Judith Kinnard. Washington DC : ACSA Press, 2010. s. 22.

Publikation: Bidrag til bog/antologi/rapport/konference proceedingKonferenceabstrakt i proceedingForskningpeer review

TY - ABST

T1 - Tools for environmental simulations and calculations in an Integrated Design Process

AU - Petersen, Mads Dines

AU - Knudstrup, Mary-Ann

PY - 2010/2

Y1 - 2010/2

N2 - Present paper is focused on how students at Architecture & Design, Aalborg University in Denmark, are working with an integrated design process where the environmental simulations and calculations are used from the beginning of the design process and even in the analysis phase of the project to address environmental issues. This paper in specific takes its starting point in a student project where the student is working with a building complex that have to fulfill the passive house standards and through that the student explores the use of the simulation and calculation tools in the design process. What the research shows is that the students can have great benefit from utilizing such tools in the design process if they are able to utilize them in a dynamic way where the simulation and calculation tools does not become the main focus. Furthermore the research reveals that the tools traditionally used to document projects in a Danish context and the tools that traditionally have been taught to the students are insufficient as they are too detailed. It shows that it becomes even more important to utilize the full spectrum of the programs applied like in this case Ecotect where the possibilities of interoperability and the different possibilities are utilized pointing towards a heavier focus of the utilization of BIM tools in the design process from the first stages.

AB - Present paper is focused on how students at Architecture & Design, Aalborg University in Denmark, are working with an integrated design process where the environmental simulations and calculations are used from the beginning of the design process and even in the analysis phase of the project to address environmental issues. This paper in specific takes its starting point in a student project where the student is working with a building complex that have to fulfill the passive house standards and through that the student explores the use of the simulation and calculation tools in the design process. What the research shows is that the students can have great benefit from utilizing such tools in the design process if they are able to utilize them in a dynamic way where the simulation and calculation tools does not become the main focus. Furthermore the research reveals that the tools traditionally used to document projects in a Danish context and the tools that traditionally have been taught to the students are insufficient as they are too detailed. It shows that it becomes even more important to utilize the full spectrum of the programs applied like in this case Ecotect where the possibilities of interoperability and the different possibilities are utilized pointing towards a heavier focus of the utilization of BIM tools in the design process from the first stages.

KW - Arkitektur

KW - Miljø

KW - Uddannelse

M3 - Conference abstract in proceeding

SN - 9780935502756

SP - 22

BT - Re.building

A2 - Goodwin, Bruce

A2 - Kinnard, Judith

PB - ACSA Press

CY - Washington DC

ER -

Petersen MD, Knudstrup M-A. Tools for environmental simulations and calculations in an Integrated Design Process. I Goodwin B, Kinnard J, red., Re.building: Abstract book 98th ACSA Annual meeting. Washington DC: ACSA Press. 2010. s. 22