Towards the Swarm Production Paradigm

Casper Schou; Akshay Avhad; Simon Bøgh; Ole Madsen

doi:10.1007/978-3-030-90700-6_11

Towards the Swarm Production Paradigm

Casper Schou^*, Akshay Avhad, Simon Bøgh, Ole Madsen

^*Kontaktforfatter

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

5 Citationer (Scopus)

Abstract

In this paper, we propose a new production paradigm called Swarm Production. A swarm production system employs both dynamic part routing and movable workstations. This allows it to adjust its topology during operation, in contrast to existing flexible production paradigms such as matrix production and reconfigurable manufacturing systems where the topology is defined during setup. Run-time optimization of the topology yields an unprecedented ability to quickly adapt to fluctuating demands or new production constraints. We present a formal definition of the swarm production paradigm and outline a preliminary roadmap by highlighting key research challenges imposed by swarm production. Finally, we present an exemplifications of a swarm production system in terms of key technologies and systems, based on an existing customisable product.

Originalsprog	Engelsk
Titel	Towards Sustainable Customization : Bridging Smart Products and Manufacturing Systems - Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference CARV 2021 and 10th World Mass Customization and Personalization Conference MCPC 2021
Redaktører	Ann-Louise Andersen, Rasmus Andersen, Thomas Ditlev Brunoe, Maria Stoettrup Schioenning Larsen, Kjeld Nielsen, Alessia Napoleone, Stefan Kjeldgaard
Antal sider	8
Forlag	Springer
Publikationsdato	2022
Sider	105-112
ISBN (Trykt)	9783030906993
DOI	https://doi.org/10.1007/978-3-030-90700-6_11
Status	Udgivet - 2022
Begivenhed	8th Changeable, Agile, Reconfigurable and Virtual Production Conference, CARV 2021 and 10th World Mass Customization and Personalization Conference, MCPC 2021 - Aalborg, Danmark Varighed: 1 nov. 2021 → 2 nov. 2021

Konference

Konference	8th Changeable, Agile, Reconfigurable and Virtual Production Conference, CARV 2021 and 10th World Mass Customization and Personalization Conference, MCPC 2021
Land/Område	Danmark
By	Aalborg
Periode	01/11/2021 → 02/11/2021

Navn	Lecture Notes in Mechanical Engineering
ISSN	2195-4356

Bibliografisk note

Publisher Copyright:
© 2022, Springer Nature Switzerland AG.

Adgang til dokumentet

10.1007/978-3-030-90700-6_11

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Andre filer og links

Link to publication in Scopus

MADE FAST: MADE Flexible, Agile, Sustainable manufacturing enabled by Talented employees.
Møller, C. (PI (principal investigator)), Wæhrens, B. V. (CoI (co-investigator)), Møller, C. (Projektleder), Madsen, O. (Supervisor), Remmen, A. (Supervisor), Brunø, T. D. (Supervisor), Møller, C. (Supervisor) & Wæhrens, B. V. (Supervisor)
Innovationsfonden
01/01/2021 → 31/12/2024
Projekter: Projekt › Forskning

Citationsformater

Schou, C., Avhad, A., Bøgh, S., & Madsen, O. (2022). Towards the Swarm Production Paradigm. I A.-L. Andersen, R. Andersen, T. D. Brunoe, M. S. S. Larsen, K. Nielsen, A. Napoleone, & S. Kjeldgaard (red.), Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems - Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference CARV 2021 and 10th World Mass Customization and Personalization Conference MCPC 2021 (s. 105-112). Springer. https://doi.org/10.1007/978-3-030-90700-6_11

Schou, Casper ; Avhad, Akshay ; Bøgh, Simon et al. / Towards the Swarm Production Paradigm. Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems - Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference CARV 2021 and 10th World Mass Customization and Personalization Conference MCPC 2021. red. / Ann-Louise Andersen ; Rasmus Andersen ; Thomas Ditlev Brunoe ; Maria Stoettrup Schioenning Larsen ; Kjeld Nielsen ; Alessia Napoleone ; Stefan Kjeldgaard. Springer, 2022. s. 105-112 (Lecture Notes in Mechanical Engineering).

@inproceedings{8b5f9db3e53b46ed9d5c9e62caf812b2,

title = "Towards the Swarm Production Paradigm",

abstract = "In this paper, we propose a new production paradigm called Swarm Production. A swarm production system employs both dynamic part routing and movable workstations. This allows it to adjust its topology during operation, in contrast to existing flexible production paradigms such as matrix production and reconfigurable manufacturing systems where the topology is defined during setup. Run-time optimization of the topology yields an unprecedented ability to quickly adapt to fluctuating demands or new production constraints. We present a formal definition of the swarm production paradigm and outline a preliminary roadmap by highlighting key research challenges imposed by swarm production. Finally, we present an exemplifications of a swarm production system in terms of key technologies and systems, based on an existing customisable product.",

keywords = "Manufacturing, Production paradigms, Production topology, Swarm production",

author = "Casper Schou and Akshay Avhad and Simon B{\o}gh and Ole Madsen",

note = "Publisher Copyright: {\textcopyright} 2022, Springer Nature Switzerland AG.; 8th Changeable, Agile, Reconfigurable and Virtual Production Conference, CARV 2021 and 10th World Mass Customization and Personalization Conference, MCPC 2021 ; Conference date: 01-11-2021 Through 02-11-2021",

year = "2022",

doi = "10.1007/978-3-030-90700-6_11",

language = "English",

isbn = "9783030906993",

series = "Lecture Notes in Mechanical Engineering",

publisher = "Springer",

pages = "105--112",

editor = "Ann-Louise Andersen and Rasmus Andersen and Brunoe, {Thomas Ditlev} and Larsen, {Maria Stoettrup Schioenning} and Kjeld Nielsen and Alessia Napoleone and Stefan Kjeldgaard",

booktitle = "Towards Sustainable Customization",

address = "Germany",

}

Schou, C , Avhad, A , Bøgh, S & Madsen, O 2022, Towards the Swarm Production Paradigm. i A-L Andersen, R Andersen, TD Brunoe, MSS Larsen, K Nielsen, A Napoleone & S Kjeldgaard (red), Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems - Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference CARV 2021 and 10th World Mass Customization and Personalization Conference MCPC 2021. Springer, Lecture Notes in Mechanical Engineering, s. 105-112, 8th Changeable, Agile, Reconfigurable and Virtual Production Conference, CARV 2021 and 10th World Mass Customization and Personalization Conference, MCPC 2021, Aalborg, Danmark, 01/11/2021. https://doi.org/10.1007/978-3-030-90700-6_11

Towards the Swarm Production Paradigm. / Schou, Casper ; Avhad, Akshay ; Bøgh, Simon et al.
Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems - Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference CARV 2021 and 10th World Mass Customization and Personalization Conference MCPC 2021. red. / Ann-Louise Andersen; Rasmus Andersen; Thomas Ditlev Brunoe; Maria Stoettrup Schioenning Larsen; Kjeld Nielsen; Alessia Napoleone; Stefan Kjeldgaard. Springer, 2022. s. 105-112 (Lecture Notes in Mechanical Engineering).

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Towards the Swarm Production Paradigm

AU - Schou, Casper

AU - Avhad, Akshay

AU - Bøgh, Simon

AU - Madsen, Ole

PY - 2022

Y1 - 2022

N2 - In this paper, we propose a new production paradigm called Swarm Production. A swarm production system employs both dynamic part routing and movable workstations. This allows it to adjust its topology during operation, in contrast to existing flexible production paradigms such as matrix production and reconfigurable manufacturing systems where the topology is defined during setup. Run-time optimization of the topology yields an unprecedented ability to quickly adapt to fluctuating demands or new production constraints. We present a formal definition of the swarm production paradigm and outline a preliminary roadmap by highlighting key research challenges imposed by swarm production. Finally, we present an exemplifications of a swarm production system in terms of key technologies and systems, based on an existing customisable product.

AB - In this paper, we propose a new production paradigm called Swarm Production. A swarm production system employs both dynamic part routing and movable workstations. This allows it to adjust its topology during operation, in contrast to existing flexible production paradigms such as matrix production and reconfigurable manufacturing systems where the topology is defined during setup. Run-time optimization of the topology yields an unprecedented ability to quickly adapt to fluctuating demands or new production constraints. We present a formal definition of the swarm production paradigm and outline a preliminary roadmap by highlighting key research challenges imposed by swarm production. Finally, we present an exemplifications of a swarm production system in terms of key technologies and systems, based on an existing customisable product.

KW - Manufacturing

KW - Production paradigms

KW - Production topology

KW - Swarm production

UR - http://www.scopus.com/inward/record.url?scp=85119452119&partnerID=8YFLogxK

U2 - 10.1007/978-3-030-90700-6_11

DO - 10.1007/978-3-030-90700-6_11

M3 - Article in proceeding

AN - SCOPUS:85119452119

SN - 9783030906993

T3 - Lecture Notes in Mechanical Engineering

SP - 105

EP - 112

BT - Towards Sustainable Customization

A2 - Andersen, Ann-Louise

A2 - Andersen, Rasmus

A2 - Brunoe, Thomas Ditlev

A2 - Larsen, Maria Stoettrup Schioenning

A2 - Nielsen, Kjeld

A2 - Napoleone, Alessia

A2 - Kjeldgaard, Stefan

PB - Springer

T2 - 8th Changeable, Agile, Reconfigurable and Virtual Production Conference, CARV 2021 and 10th World Mass Customization and Personalization Conference, MCPC 2021

Y2 - 1 November 2021 through 2 November 2021

ER -

Schou C , Avhad A , Bøgh S , Madsen O. Towards the Swarm Production Paradigm. I Andersen AL, Andersen R, Brunoe TD, Larsen MSS, Nielsen K, Napoleone A, Kjeldgaard S, red., Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems - Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference CARV 2021 and 10th World Mass Customization and Personalization Conference MCPC 2021. Springer. 2022. s. 105-112. (Lecture Notes in Mechanical Engineering). doi: 10.1007/978-3-030-90700-6_11

Towards the Swarm Production Paradigm

Abstract

Konference

Bibliografisk note

Adgang til dokumentet

AUB Link

Andre filer og links

Fingeraftryk

Projekter

MADE FAST: MADE Flexible, Agile, Sustainable manufacturing enabled by Talented employees.

Citationsformater