Tvindkraft: Implementing a 500 kW 21-IGBT-Based Frequency Converter for a 1.7 MW Wind Power Conversion System

Pablo Casado Gonzalez; Ying Pang; Paula Diaz Reigosa; Emmanouil Dimopoulos; Jorge Varela Barreras; Erik Schaltz

doi:10.1109/ICRERA.2013.6749803

Tvindkraft: Implementing a 500 kW 21-IGBT-Based Frequency Converter for a 1.7 MW Wind Power Conversion System

Pablo Casado Gonzalez, Ying Pang, Paula Diaz Reigosa, Emmanouil Dimopoulos, Jorge Varela Barreras, Erik Schaltz

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

2 Citationer (Scopus)

630 Downloads (Pure)

Abstract

The 54-meter-high Tvindkraft windmill was built by a group of volunteers during 1975-1978, as an argument for renewable energy sources as well as an argument against nuclear power. At that time it was the world’s biggest windmill. So far, Tvindkraft has been running for 35 years, proving that a wellconstructed wind turbine is a sustainable approach to renewable energy utilization. This paper deals with the analysis, simulation, implementation and experimental testing of a new 500 kW 21- IGBT-based frequency converter that will run in parallel with the former 12-Thyristor-based frequency converter to fully utilize the capacity of the windmill. Simulations and experimental results are presented side-by-side to verify the proper functionalities of the frequency converter described in this paper.

Originalsprog	Engelsk
Titel	Proceedings of the 2013 IEEE International Conference on Renewable Energy Research and Applications
Antal sider	6
Forlag	IEEE Press
Publikationsdato	okt. 2013
Sider	482-487
ISBN (Trykt)	978-1-4799-1464-7
DOI	https://doi.org/10.1109/ICRERA.2013.6749803
Status	Udgivet - okt. 2013
Begivenhed	2013 International Conference on Renewable Energy Research and Applications - Madrid, Spanien Varighed: 20 okt. 2013 → 23 okt. 2013

Konference

Konference	2013 International Conference on Renewable Energy Research and Applications
Land/Område	Spanien
By	Madrid
Periode	20/10/2013 → 23/10/2013

Adgang til dokumentet

10.1109/ICRERA.2013.6749803

Tvindkraft_500kW_21IGBTbased_FrequencyConverter_PaperID_186Accepteret manuskript, 890 KB

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

Gonzalez, P. C., Pang, Y., Reigosa, P. D., Dimopoulos, E., Barreras, J. V., & Schaltz, E. (2013). Tvindkraft: Implementing a 500 kW 21-IGBT-Based Frequency Converter for a 1.7 MW Wind Power Conversion System. I Proceedings of the 2013 IEEE International Conference on Renewable Energy Research and Applications (s. 482-487). IEEE Press. https://doi.org/10.1109/ICRERA.2013.6749803

@inproceedings{1d60a6c08c084591a7d545daa1e70c1a,

title = "Tvindkraft: Implementing a 500 kW 21-IGBT-Based Frequency Converter for a 1.7 MW Wind Power Conversion System",

abstract = "The 54-meter-high Tvindkraft windmill was built by a group of volunteers during 1975-1978, as an argument for renewable energy sources as well as an argument against nuclear power. At that time it was the world{\textquoteright}s biggest windmill. So far, Tvindkraft has been running for 35 years, proving that a wellconstructed wind turbine is a sustainable approach to renewable energy utilization. This paper deals with the analysis, simulation, implementation and experimental testing of a new 500 kW 21- IGBT-based frequency converter that will run in parallel with the former 12-Thyristor-based frequency converter to fully utilize the capacity of the windmill. Simulations and experimental results are presented side-by-side to verify the proper functionalities of the frequency converter described in this paper.",

author = "Gonzalez, {Pablo Casado} and Ying Pang and Reigosa, {Paula Diaz} and Emmanouil Dimopoulos and Barreras, {Jorge Varela} and Erik Schaltz",

year = "2013",

month = oct,

doi = "10.1109/ICRERA.2013.6749803",

language = "English",

isbn = "978-1-4799-1464-7",

pages = "482--487",

booktitle = "Proceedings of the 2013 IEEE International Conference on Renewable Energy Research and Applications",

publisher = "IEEE Press",

note = "2013 International Conference on Renewable Energy Research and Applications ; Conference date: 20-10-2013 Through 23-10-2013",

}

Gonzalez, PC, Pang, Y, Reigosa, PD, Dimopoulos, E, Barreras, JV & Schaltz, E 2013, Tvindkraft: Implementing a 500 kW 21-IGBT-Based Frequency Converter for a 1.7 MW Wind Power Conversion System. i Proceedings of the 2013 IEEE International Conference on Renewable Energy Research and Applications. IEEE Press, s. 482-487, 2013 International Conference on Renewable Energy Research and Applications, Madrid, Spanien, 20/10/2013. https://doi.org/10.1109/ICRERA.2013.6749803

Tvindkraft: Implementing a 500 kW 21-IGBT-Based Frequency Converter for a 1.7 MW Wind Power Conversion System. / Gonzalez, Pablo Casado; Pang, Ying; Reigosa, Paula Diaz et al.
Proceedings of the 2013 IEEE International Conference on Renewable Energy Research and Applications. IEEE Press, 2013. s. 482-487.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Tvindkraft: Implementing a 500 kW 21-IGBT-Based Frequency Converter for a 1.7 MW Wind Power Conversion System

AU - Gonzalez, Pablo Casado

AU - Pang, Ying

AU - Reigosa, Paula Diaz

AU - Dimopoulos, Emmanouil

AU - Barreras, Jorge Varela

AU - Schaltz, Erik

PY - 2013/10

Y1 - 2013/10

N2 - The 54-meter-high Tvindkraft windmill was built by a group of volunteers during 1975-1978, as an argument for renewable energy sources as well as an argument against nuclear power. At that time it was the world’s biggest windmill. So far, Tvindkraft has been running for 35 years, proving that a wellconstructed wind turbine is a sustainable approach to renewable energy utilization. This paper deals with the analysis, simulation, implementation and experimental testing of a new 500 kW 21- IGBT-based frequency converter that will run in parallel with the former 12-Thyristor-based frequency converter to fully utilize the capacity of the windmill. Simulations and experimental results are presented side-by-side to verify the proper functionalities of the frequency converter described in this paper.

AB - The 54-meter-high Tvindkraft windmill was built by a group of volunteers during 1975-1978, as an argument for renewable energy sources as well as an argument against nuclear power. At that time it was the world’s biggest windmill. So far, Tvindkraft has been running for 35 years, proving that a wellconstructed wind turbine is a sustainable approach to renewable energy utilization. This paper deals with the analysis, simulation, implementation and experimental testing of a new 500 kW 21- IGBT-based frequency converter that will run in parallel with the former 12-Thyristor-based frequency converter to fully utilize the capacity of the windmill. Simulations and experimental results are presented side-by-side to verify the proper functionalities of the frequency converter described in this paper.

U2 - 10.1109/ICRERA.2013.6749803

DO - 10.1109/ICRERA.2013.6749803

M3 - Article in proceeding

SN - 978-1-4799-1464-7

SP - 482

EP - 487

BT - Proceedings of the 2013 IEEE International Conference on Renewable Energy Research and Applications

PB - IEEE Press

T2 - 2013 International Conference on Renewable Energy Research and Applications

Y2 - 20 October 2013 through 23 October 2013

ER -

Tvindkraft: Implementing a 500 kW 21-IGBT-Based Frequency Converter for a 1.7 MW Wind Power Conversion System

Abstract

Konference

Adgang til dokumentet

AUB Link

Fingeraftryk

Citationsformater