Visualizing earthwork and information on a linear infrastructure project using BIM 4D

Lasse Schneider Jakobsen, J. Lodewijks, Peter Nørkjær Gade, Erik Kjems

Publikation: Bidrag til bog/antologi/rapport/konference proceedingKonferenceartikel i proceedingForskningpeer review

Resumé

Visualizing earthwork and information on a linear infrastructure project using BIM 4D L. Schneider Jakobsen University College of Northern Denmark J. Lodewijks Züblin-Strabag BIM 5D Germany P. Nørkjær Gade University College of Northern Denmark E. Kjems Aalborg university Denmark ABSTRACT: Countries worldwide are facing the need for infrastructure improvements on a large scale. Projects concerning road, railway, tunnel and pipelines include a large amount of earthworks which is often delayed or has considerable cost overruns. This study presents a method to assist earthwork planning, by extracting separate 3D objects of cutting and filling, at-taching schedule information and visualize these in commercial BIM 4D software. The 4D method was applied and verified in the re-scheduling of a linear infrastructure project which is one of the German governments selected pilot projects before implementing BIM requirements in 2020.The study indicated that the 4D visualization enable information flow between projects participants. The paper gives suggestions to the level of information detailing standardized open data format should be able to contain in regards of facilitating the use of BIM 4D information visualizing in future linear infrastructure projects.
OriginalsprogEngelsk
TiteleWork and eBusiness in Architecture, Engineering and Construction : Proceedings of the 12th European Conference on Product and Process Modelling (ECPPM 2018)
RedaktørerJan Karlshøj, Raimar Scherer
Udgivelses stedLondon
ForlagCRC Press/Balkema
Publikationsdato2018
Sider177-186
ISBN (Trykt)978-1-138-58413-6
ISBN (Elektronisk)978-0-429-50621-5
DOI
StatusUdgivet - 2018
BegivenhedThe 12th European Conference on Product and Process Modelling 2018 - Copenhagen, Danmark
Varighed: 12 sep. 201814 sep. 2018

Konference

KonferenceThe 12th European Conference on Product and Process Modelling 2018
LandDanmark
ByCopenhagen
Periode12/09/201814/09/2018

Fingerprint

Tunnels
Visualization
Pipelines
Scheduling
Planning
Costs

Citer dette

Jakobsen, L. S., Lodewijks, J., Gade, P. N., & Kjems, E. (2018). Visualizing earthwork and information on a linear infrastructure project using BIM 4D. I J. Karlshøj, & R. Scherer (red.), eWork and eBusiness in Architecture, Engineering and Construction: Proceedings of the 12th European Conference on Product and Process Modelling (ECPPM 2018) (s. 177-186). London: CRC Press/Balkema. https://doi.org/10.1201/9780429506215-23
Jakobsen, Lasse Schneider ; Lodewijks, J. ; Gade, Peter Nørkjær ; Kjems, Erik. / Visualizing earthwork and information on a linear infrastructure project using BIM 4D. eWork and eBusiness in Architecture, Engineering and Construction: Proceedings of the 12th European Conference on Product and Process Modelling (ECPPM 2018). red. / Jan Karlshøj ; Raimar Scherer. London : CRC Press/Balkema, 2018. s. 177-186
@inproceedings{9811ff25f3f24e9f94b82304d8d74631,
title = "Visualizing earthwork and information on a linear infrastructure project using BIM 4D",
abstract = "Visualizing earthwork and information on a linear infrastructure project using BIM 4D L. Schneider Jakobsen University College of Northern Denmark J. Lodewijks Z{\"u}blin-Strabag BIM 5D Germany P. N{\o}rkj{\ae}r Gade University College of Northern Denmark E. Kjems Aalborg university Denmark ABSTRACT: Countries worldwide are facing the need for infrastructure improvements on a large scale. Projects concerning road, railway, tunnel and pipelines include a large amount of earthworks which is often delayed or has considerable cost overruns. This study presents a method to assist earthwork planning, by extracting separate 3D objects of cutting and filling, at-taching schedule information and visualize these in commercial BIM 4D software. The 4D method was applied and verified in the re-scheduling of a linear infrastructure project which is one of the German governments selected pilot projects before implementing BIM requirements in 2020.The study indicated that the 4D visualization enable information flow between projects participants. The paper gives suggestions to the level of information detailing standardized open data format should be able to contain in regards of facilitating the use of BIM 4D information visualizing in future linear infrastructure projects.",
author = "Jakobsen, {Lasse Schneider} and J. Lodewijks and Gade, {Peter N{\o}rkj{\ae}r} and Erik Kjems",
year = "2018",
doi = "10.1201/9780429506215-23",
language = "English",
isbn = "978-1-138-58413-6",
pages = "177--186",
editor = "Jan Karlsh{\o}j and Raimar Scherer",
booktitle = "eWork and eBusiness in Architecture, Engineering and Construction",
publisher = "CRC Press/Balkema",

}

Jakobsen, LS, Lodewijks, J, Gade, PN & Kjems, E 2018, Visualizing earthwork and information on a linear infrastructure project using BIM 4D. i J Karlshøj & R Scherer (red), eWork and eBusiness in Architecture, Engineering and Construction: Proceedings of the 12th European Conference on Product and Process Modelling (ECPPM 2018). CRC Press/Balkema, London, s. 177-186, Copenhagen, Danmark, 12/09/2018. https://doi.org/10.1201/9780429506215-23

Visualizing earthwork and information on a linear infrastructure project using BIM 4D. / Jakobsen, Lasse Schneider; Lodewijks, J.; Gade, Peter Nørkjær; Kjems, Erik.

eWork and eBusiness in Architecture, Engineering and Construction: Proceedings of the 12th European Conference on Product and Process Modelling (ECPPM 2018). red. / Jan Karlshøj; Raimar Scherer. London : CRC Press/Balkema, 2018. s. 177-186.

Publikation: Bidrag til bog/antologi/rapport/konference proceedingKonferenceartikel i proceedingForskningpeer review

TY - GEN

T1 - Visualizing earthwork and information on a linear infrastructure project using BIM 4D

AU - Jakobsen, Lasse Schneider

AU - Lodewijks, J.

AU - Gade, Peter Nørkjær

AU - Kjems, Erik

PY - 2018

Y1 - 2018

N2 - Visualizing earthwork and information on a linear infrastructure project using BIM 4D L. Schneider Jakobsen University College of Northern Denmark J. Lodewijks Züblin-Strabag BIM 5D Germany P. Nørkjær Gade University College of Northern Denmark E. Kjems Aalborg university Denmark ABSTRACT: Countries worldwide are facing the need for infrastructure improvements on a large scale. Projects concerning road, railway, tunnel and pipelines include a large amount of earthworks which is often delayed or has considerable cost overruns. This study presents a method to assist earthwork planning, by extracting separate 3D objects of cutting and filling, at-taching schedule information and visualize these in commercial BIM 4D software. The 4D method was applied and verified in the re-scheduling of a linear infrastructure project which is one of the German governments selected pilot projects before implementing BIM requirements in 2020.The study indicated that the 4D visualization enable information flow between projects participants. The paper gives suggestions to the level of information detailing standardized open data format should be able to contain in regards of facilitating the use of BIM 4D information visualizing in future linear infrastructure projects.

AB - Visualizing earthwork and information on a linear infrastructure project using BIM 4D L. Schneider Jakobsen University College of Northern Denmark J. Lodewijks Züblin-Strabag BIM 5D Germany P. Nørkjær Gade University College of Northern Denmark E. Kjems Aalborg university Denmark ABSTRACT: Countries worldwide are facing the need for infrastructure improvements on a large scale. Projects concerning road, railway, tunnel and pipelines include a large amount of earthworks which is often delayed or has considerable cost overruns. This study presents a method to assist earthwork planning, by extracting separate 3D objects of cutting and filling, at-taching schedule information and visualize these in commercial BIM 4D software. The 4D method was applied and verified in the re-scheduling of a linear infrastructure project which is one of the German governments selected pilot projects before implementing BIM requirements in 2020.The study indicated that the 4D visualization enable information flow between projects participants. The paper gives suggestions to the level of information detailing standardized open data format should be able to contain in regards of facilitating the use of BIM 4D information visualizing in future linear infrastructure projects.

UR - https://www.crcpress.com/eWork-and-eBusiness-in-Architecture-Engineering-and-Construction-Proceedings/Karlshoj-Scherer/p/book/9781138584136

U2 - 10.1201/9780429506215-23

DO - 10.1201/9780429506215-23

M3 - Article in proceeding

SN - 978-1-138-58413-6

SP - 177

EP - 186

BT - eWork and eBusiness in Architecture, Engineering and Construction

A2 - Karlshøj, Jan

A2 - Scherer, Raimar

PB - CRC Press/Balkema

CY - London

ER -

Jakobsen LS, Lodewijks J, Gade PN, Kjems E. Visualizing earthwork and information on a linear infrastructure project using BIM 4D. I Karlshøj J, Scherer R, red., eWork and eBusiness in Architecture, Engineering and Construction: Proceedings of the 12th European Conference on Product and Process Modelling (ECPPM 2018). London: CRC Press/Balkema. 2018. s. 177-186 https://doi.org/10.1201/9780429506215-23