Photo of Karl Brian Nielsen

Karl Brian Nielsen

Faglært bager, Civilingeniør (Industri), Ph.D.

  • Fibigerstræde 16, 4213

    9220 Aalborg Ø

    Denmark

1992 …2018
If you made any changes in Pure these will be visible here soon.

Research Output 1992 2018

2018
39 Downloads (Pure)

Design of an innovative multi-stage forming process for a complex aeronautical thin-walled part with very small radii

Wang, Y., Lang, L., Sherkatghanad, E., Nielsen, K. B. & Zhang, C., 1 Nov 2018, In : Chinese Journal of Aeronautics. 31, 11, p. 2165-2175 11 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
Geometry
Hydraulics
Calibration

Investigation into bulging-pressing compound forming for sheet metal parts with very small radii

Wang, Y., Nielsen, K. B., Lang, L. & Endelt, B. Ø., 2 Jan 2018, In : International Journal of Advanced Manufacturing Technology. 95, 1-4, p. 445-457 12 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Rigid-flexible coupling forming process for aluminum alloy automobile body panels

Wang, Y., Lang, L., Sherkatghanad, E., Nielsen, K. B., Xing Li, X. & Ying Sun, Z., 2 Jan 2018, In : International Journal of Advanced Manufacturing Technology. 95, 9-12, p. 3905-3918 14 p.

Research output: Contribution to journalJournal articleResearchpeer-review

2014

Statistical investigation of a blank holder force distribution system for a multi-step deep drawing process

Tommerup, S., Endelt, B. Ø. & Nielsen, K. B., 2014, Proceedings of NUMISHEET 2014. American Institute of Physics, p. 1032-1035 (AIP Conference Proceedings).

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearchpeer-review

5 Citations (Scopus)

The best way possible! A fieldwork study outlining expectations and needs for nursing of patients in endoscopy facilities for short-term stay

Bundgaard, K., Nielsen, K. B., Sørensen, E. E. & Delmar, C., 2014, In : Scandinavian Journal of Caring Sciences. 28, 1, p. 164-172 9 p.

Research output: Contribution to journalJournal articleResearchpeer-review

2013

Designing a feedback control algorithm for the tube hydroforming process

Endelt, B. Ø., Cheng, M., Zhang, S. & Nielsen, K. B., 2013, The 11th International Conference on Numerical Methods in Industrial Forming Processes: Numiform 2013. AIP Conference Proceedings. AIP Conference Proceedings, Vol. 1532. p. 269-278 (AIP Conference Proceedings, Vol. 1532).

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearchpeer-review

2012
13 Citations (Scopus)

What to know and how to get to know? A fieldwork study outlining the understanding of knowing the patient in facilities for short-term stay

Bundgaard, K., Nielsen, K. B., Delmar, C. & Sørensen, E. E., 2012, In : Journal of Advanced Nursing. 68, 10, p. 2280–2288 9 p.

Research output: Contribution to journalJournal articleResearchpeer-review

2011

Intelligent Shimming for Deep Drawing Processes

Tommerup, S., Endelt, B. Ø., Danckert, J. & Nielsen, K. B., 2011, In : AIP Conference Proceedings. 1383, p. 259-266 8 p.

Research output: Contribution to journalConference article in JournalResearchpeer-review

Kort & Godt? Om korttidsafsnit og korttidssygepleje

Bundgaard, K., Sørensen, E. E. & Nielsen, K. B., 2011, In : Klinisk Sygepleje. 25, 3, p. 18-30

Research output: Contribution to journalJournal articleResearchpeer-review

The art of holding hands: A fieldwork study outlining the significance of physical touch in facilities for short-term stay

Bundgaard, K., Sørensen, E. E. & Nielsen, K. B., 2011, In : International Journal for Human Caring. 15, 3, p. 34-41

Research output: Contribution to journalJournal articleResearchpeer-review

2010

Evaluation of the effects of a movable tool in the hydroforming process

Palumbo, G., Tricarico, L., Zhang, S-H., Zhou, L. X., Danckert, J. & Nielsen, K. B., 2010, In : International Journal of Materials and Product Technology. 38, 4, p. 386-398 12 p.

Research output: Contribution to journalJournal articleResearchpeer-review

6 Citations (Scopus)

Simulation-based patient flow analysis in an endoscopy unit

Koo, P-H., Nielsen, K. B., Jang, J. & Kolker, A., 2010, 2010 IEEE Workshop on Health Care Management, WHCM 2010. IEEE Press, p. 1-6 6 p.

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearchpeer-review

Endoscopy
Scheduling
Costs
2009

Ansøgning om støtte til opgradering af 375 ton hydraulisk presse

Endelt, B. Ø., Danckert, J. & Nielsen, K. B., 2009

Research output: Other contributionCommunication

22 Citations (Scopus)

Investigation into Hydromechanical Deep Drawing of Aluminum Alloy-complicated Components in Aircraft manufacturing

Lang, L., Li, T., An, D., Chi, C., Nielsen, K. B. & Danckert, J., 2009, In : Materials Science & Engineering: A. 499, 1-2, p. 320-324

Research output: Contribution to journalJournal articleResearchpeer-review

14 Citations (Scopus)

Investigation into the pre-forming's effect during multi-stages of tube hydroforming of aluminum alloy tube by using useful wrinkles

Lang, L., Li, H., Yuan, S., Danckert, J. & Nielsen, K. B., 2009, In : Journal of Materials Processing Technology. 209, 5, p. 2553-2563

Research output: Contribution to journalJournal articleResearchpeer-review

Adaptive Shimming Control for the Ultimate Deep Drawing Process

Endelt, B. Ø., Nielsen, K. B. & Danckert, J., 2008, Proceedings of the IDDRG 2008 Conference, Best in Class Stamping. Asnafi, N. (ed.). IDDRG, International Deep Drawing Research Group

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearchpeer-review

Clusters in the EU Member Countries: National and Regional Case Stories with Aalborg University as Partner

Nielsen, S. H. & Nielsen, K. B., 2008, Proceedings of PICMET'08. Portland International Conference on Management of Engineering & Technology. Kocaoglu, D. F., Anderson, T. R. & Daim, T. U. (eds.). IEEE, p. 240-252

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearchpeer-review

Supply Chain Strategy Development at XX A/S. Application of Lean Manufacturing and Supply Chanin Management - methodology and case story

Nielsen, S. H. & Nielsen, K. B., 2008, The 3rd European Conference on Management of Technology, 2008, Nice, Sophia-Antipolis. Proceedings of the EuroMOT 2008. 12 p.

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearchpeer-review

19 Citations (Scopus)

Teaching Lean Thinking Through Game: Some Challenges

Dukovska-Popovska, I., Hove-Madsen, V. & Nielsen, K. B., 2008, Proceedings of 36th European Society for Engineering Education (SEFI) on Quality Assessment, Employability & Innovation. Fink, F. (ed.). Brill | Sense

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearchpeer-review

2007

Primary Stability of Open-wedge Osteotomies - The Effect of Calcium-phosphate cement. A Biomechnical Study Performed on Composite and Cadaver Bones

Lind-Hansen, T., Nielsen, P. T., Petruskevicius, J., Endelt, B. Ø., Nielsen, K. B., Hvid, I. & Lind, M., 2007. 1 p.

Research output: Contribution to conference without publisher/journalConference abstract for conferenceResearch

12 Citations (Scopus)

The Effect of the Key Process Parameters in the Innovative Hydroforming on the Formed Parts

Lang, L., Li, T., Zhou, X., Danckert, J. & Nielsen, K. B., 2007, In : Journal of Materials Processing Technology. 187-188, p. 304-308

Research output: Contribution to journalJournal articleResearchpeer-review

2006

Closed Loop Control of Deep Drawing Operation Using Distributed Blank-holder-force

Endelt, B. Ø., Nielsen, K. B. & Danckert, J., 2006, Proceedings of The 9th International Conference on Material Forming, ESAFORM 2006. Juster, N. & Rosochowski, A. (eds.). University of Strathclyde, p. 279-282

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearchpeer-review

Lean Production, "..add value eliminate muda" - 2006

Nielsen, K. B. & Esko, C., 2006, Aalborg University: Denmark. 50 p.

Research output: Book/ReportCompendium/lecture notesEducation

12 Citations (Scopus)

New Framework for On-line Feedback Control of a Deep-drawing Operation

Endelt, B. Ø., Nielsen, K. B. & Danckert, J., 2006, In : Journal of Materials Processing Technology. 177, 1-3, p. 426-429

Research output: Contribution to journalJournal articleResearchpeer-review

8 Citations (Scopus)

Optimized Constitutive Equation of Material Property Based on Inverse Modeling for Aluminum Alloy Hydroforming Simulation

Lang, L., Zhou, X., Endelt, B. Ø., Danckert, J. & Nielsen, K. B., 2006, In : Transactions of Nonferrous Metals Society of China. 16, 6, p. 1379-1385

Research output: Contribution to journalJournal articleResearchpeer-review

6 Citations (Scopus)

Optimized Decision of the Exact Material Modes in the Simulation for the Innovative Sheet Hydroforming Method

Lang, L., Li, T., Zhou, X., Endelt, B. Ø., Danckert, J. & Nielsen, K. B., 2006, In : Journal of Materials Processing Technology. 177, 1-3, p. 692-696

Research output: Contribution to journalJournal articleResearchpeer-review

Primary Stability of Open-wedge Osteotomies - The Effect of Calcium-phosphate Cement. A Biomechanical Study Performed on Composite and Cadaver Bones.

Lind-hansen, T., Nielsen, P. T., Petruskevicius, J., Endelt, B. Ø., Nielsen, K. B., Hvid, I. & Lind, M., 2006. 1 p.

Research output: Contribution to conference without publisher/journalPosterResearch

2005

Advanced Gradient Based Optimization Techniques Applied on Sheet Metal Forming

Endelt, B. Ø. & Nielsen, K. B., 2005, On the Cutting Edge of Technology, Numisheet 2005: Proceedings of the 6th International Conference on Numerical Simulation of 3D Sheet Metal Forming Processes. Smith, L. M., Pourboghrat, F., Yoon, J-W. & Stoughton, T. B. (eds.). American Institute of Physics, p. 795-800 (AIP Conference Proceedings; No. A, Vol. 778).

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearchpeer-review

2 Citations (Scopus)

Analytic Differentiation of Barlat's 2D Criteria for Inverse Modeling

Endelt, B. Ø., Nielsen, K. B. & Danckert, J., 2005, On the Cutting Edge of Technology, Numisheet 2005: Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Smith, L. M., Pourboghrat, F., Yoon, J-W. & Stoughton, T. B. (eds.). American Institute of Physics, p. 789-800 (AIP Conference Proceedings; No. A, Vol. 778).

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearchpeer-review

1 Citation (Scopus)

Forming process of strong anisotropic material based on the hydrodynamic deep drawing with radial pressure

Lang, L. H., Danckert, J. & Nielsen, K. B., 2005, In : Journal of Materials Science & Technology. 21, 5, p. 733-737 5 p.

Research output: Contribution to journalJournal articleResearchpeer-review

4 Citations (Scopus)

General Framework for Analytic Sensitivity Analysis for Inverse Identification of Constitutive Parameters

Endelt, B. Ø. & Nielsen, K. B., 2005, Computational Plasticity VIII, Fundamentals and Applications, Part 1. Owen, D. R. J., Oñate, E. & Suárez, B. (eds.). Spain, p. 223-226

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearchpeer-review

Identification of Constitutive Parameters in Sheet Hydroforming by Inverse Modelling

Lang, L., Endelt, B. Ø., Danckert, J. & Nielsen, K. B., 2005, Computational Mechanics, WCCM VI in conjunction with APCOM'04. Tsinghua University, 1 p.

Research output: Contribution to book/anthology/report/conference proceedingConference abstract in proceedingResearch

47 Citations (Scopus)

Investigation into Hydrodynamic Deep Drawing Assisted by Radial Pressure, Part II. Numerical Analysis of the Drawing Mechanism and the Process Parameters

Lang, L., Danckert, J. & Nielsen, K. B., 2005, In : Journal of Materials Processing Technology. 166, 166, p. 150-161

Research output: Contribution to journalJournal articleResearchpeer-review

31 Citations (Scopus)

Investigation into the Forming of a Complex Cup Locally Constrained by a Round Die Based on an Innovative Hydromechanical Deep Drawing Method

Lang, L., Danckert, J., Nielsen, K. B. & Zhou, X., 2005, In : Journal of Materials Processing Technology. 167, 167, p. 191-200

Research output: Contribution to journalJournal articleResearchpeer-review

Investigation into the Innovative Sheet Hydroforming Methods with Uniform Pressure onto the Blank

Lang, L. H., Li, T., Zhou, X. B., Danckert, J., Nielsen, K. B., Zhang, S. H. & Zhou, L. X., 2005, 8th ICTP 2005. DIMEG, Dipartimento di Innovazione Meccanica e Gestionale, University of Padova, 8 p.

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearch

Lean Production, "..add value eliminate muda" - 2005

Nielsen, K. B. & Esko, C., 2005, Aalborg University: Denmark.

Research output: Book/ReportCompendium/lecture notesEducation

33 Citations (Scopus)

Multi-layer Sheet Hydroforming: Experimental and Numerical Investigation into the very thin Layer in the Middle

Lang, L., Danckert, J. & Nielsen, K. B., 2005, In : Journal of Materials Processing Technology. 170, 3, p. 524-535

Research output: Contribution to journalJournal articleResearchpeer-review

1 Citation (Scopus)

Research on the effect of the local constraints on sheet hydroforming with the movable die

Zhou, L. X., Lang, L., Danckert, J., Zhang, S. H. & Nielsen, K. B., 2005, On the Cutting Edge of Technology, Numisheet 2005: Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Smith, L. M., Pourboghrat, F., Yoon, J-W. & Stoughton, T. B. (eds.). American Institute of Physics, p. 532-537 6 p. (AIP Conference Proceedings; No. A, Vol. 778).

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearchpeer-review

Research on the Sheet Hydro Forming Process Using a Movable Die to Apply Local Constraints

Zhang, S. H., Zhou, L. X., Palumbo, G., Tricarico, L., Lang, L., Danckert, J. & Nielsen, K. B., 2005, 8th ICTP 2005. DIMEG, Dipartimento di Innovazione Meccanica e Gestionale, University of Padova, 8 p.

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearchpeer-review

2004
23 Citations (Scopus)
27 Citations (Scopus)

A Study on Numerical Simulation of Hydroforming of Aluminum Alloy Tube

Lang, L., Yuan, S., Wang, X., Wang, Z. R., Fu, Z., Danckert, J. & Nielsen, K. B., 2004, In : Journal of Materials Processing Technology. 146, 3, p. 377-388

Research output: Contribution to journalJournal articleCommunication

Design Improvement in Sheet Hydroforming Based on Identification of Optimized Material Properties by Using Inverse Modeling Technology

Lang, L., Danckert, J. & Nielsen, K. B., 2004, Proceedings of the 11th ISPE International Conference on Concurrent Engineering. Cha, M. S. J. (ed.).

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearch

8 Citations (Scopus)

Experimental and numerical investigation into useful wrinkling during aluminium alloy internal high-pressure forming

Lang, L., Yuan, S. J., Wang, Z. R., Wang, X. S., Danckert, J. & Nielsen, K. B., 2004, In : Proceedings of the Institution of mechanical engineers. Part B, journal of engineering manufacture. 218, 1, p. 43-49

Research output: Contribution to journalJournal articleCommunication

Flexible Aluminum Tubes and a Least Square Multi-objective Non-linear Optimization Scheme

Kristensen, B. E., Nielsen, K. B. & Olsen, S., 2004, Materials Processing and Design: Modeling, Simulation and Applications, Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processe. Lee, S. G. J. M. C. J. K. (ed.). Vol. 712. p. 2044-2049

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearch

186 Citations (Scopus)

Hydroforming Highlights: Sheet Hydroforming and Tube Hydroforming

Lang, L., Wang, Z. R., Kang, D. C., Yuan, S. J., Zhang, S-H., Danckert, J. & Nielsen, K. B., 2004, In : Journal of Materials Processing Technology. 151, 151, p. 165-177

Research output: Contribution to journalJournal articleCommunication

Innovative Sheet Hydroformings: Processes and Numerical Analysis

Lang, L., Danckert, J. & Nielsen, K. B., 2004, New Forming Technology 2004, Proceedings of the 1st ICNFT. Yuan, Z. R. W. T. A. D. S. J. (ed.).

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearch

Inverse Modeling Based on an Analytical Definition of the Jacobian Matrix Associated with Hill's 48 Yield Criterion

Kristensen, B. E. & Nielsen, K. B., 2004, Proceedings of the 7th Esaform Conference on Material Forming - ESAFORM 2004. Stören, S. (ed.).

Research output: Contribution to book/anthology/report/conference proceedingArticle in proceedingResearch

44 Citations (Scopus)

Investigation into Hydrodynamic Deep Drawing Assisted by Radial Pressure: Part I: Experimental Observations of the Forming Process of Aluminum Alloy

Lang, L., Danckert, J. & Nielsen, K. B., 2004, In : Journal of Materials Processing Technology. 148, 148, p. 119-131

Research output: Contribution to journalJournal articleCommunication